Outline ·
[ Standard ] ·
Linear+
LYN OFFICIAL VAPING THREAD V28 - End Of Vape?, Whose Fault Is It?
|
Nub!
|
Oct 15 2015, 04:07 AM
|
|
QUOTE(andyng38 @ Oct 15 2015, 03:20 AM) I use Kendo. RM28 per ziplock bag. Prefer it for my drippers as it seems to hold more juice than wicks cut from cotton sheets, and IMO the taste is better. However for "sensitive" tanks like the Zephyrus which can leak a drop or two if not wicked just right, it's better to stick to cutting wicks from cotton sheets. Thanks for the sneak peek! Yes the airflow slot looks smaller than the V1. Assuming V2 has a similar diameter of 22mm, that smaller slot would be rather restrictive, and I'd not like that. Any who is fedup of their leaky ori Zephyrus, sell to me cheap cheap. I wouldn't mind having several (I'm serious!) Thanks for the headsup.
|
|
|
|
|
|
pspslim007
|
Oct 15 2015, 04:49 AM
|
|
QUOTE(nekkidgramma @ Oct 13 2015, 10:34 AM) Depends on your mod actually and if could support Ti mod or not. My D2 could go up to .3 ohm in Ti mod so TC could still be done within that limit. Past that and I'll burn my cotton or worse, titanium dioxide, since it'll just read it as a normal kanthal. Know your mod people. so whats your best setting for your D2 using ti01 ?
|
|
|
|
|
|
chakalakababy
|
Oct 15 2015, 07:37 AM
|
New Member
|
dei those blackrose driptip gooding or just aesthetics?
|
|
|
|
|
|
gnomemaster
|
Oct 15 2015, 08:31 AM
|
Getting Started

|
QUOTE(JimL @ Oct 14 2015, 11:42 PM) Hey, if you want to fire it at low power while using Nichrome or Kanthal, just change it to 'Joules' mode. The D2 will be able to step down then and fire at low power. but how much Joules and Temperature should i be using then??
|
|
|
|
|
|
nekkidgramma
|
Oct 15 2015, 08:42 AM
|
New Member
|
QUOTE(pspslim007 @ Oct 15 2015, 04:49 AM) so whats your best setting for your D2 using ti01 ? I won't call it my 'best' yet since I still don't have Ti wires but I did get some from a friend of mine. Did a simple spaced dual coil 26g 8 wraps on 2.5mm coming out around 0.16ish. Just wanted to taste the hype. Contact coil gave me a weird taste, I may or may have not inhaled a Class 2B human carcinogen with that but spaced coil gave me a clean vape on par with 316L SS.
|
|
|
|
|
|
JimL
|
Oct 15 2015, 09:15 AM
|
New Member
|
QUOTE(gnomemaster @ Oct 15 2015, 08:31 AM) but how much Joules and Temperature should i be using then?? Just treat joule as watts. There won't be TC if you're using Nichrome or Kanthal so you set it at 450F or anything.
|
|
|
|
|
|
VapeJunkie
|
Oct 15 2015, 09:19 AM
|
New Member
|
QUOTE(JimL @ Oct 15 2015, 03:00 AM) Hi and welcome. Didn't want you to feel left out. Looks like all the pricey mod users are not on today, just us who use normal China mods. Lol. Anyway if you wanna get a DNA200 mod it would be better to buy from a shop that gives good warranty. I've come across a number of complaints of failed DNA200 mods on other forums. Vaporshark might be a better bet. At least they've done the settings for casing temperature. Some other DNA200 mods have not. As for the MuteX V4, China cloners have slapped the Mutation name on a lot of different RDAs. Previously the MX V4 was a clone of the Yep RDA. Now its a clone of something else. Which one are you asking about? The non clone version by indulgence, have had bad experiences with cloned stuff. Im still using a Sigelei but the new Vaporshark and Lavabox looks too good not to have either one, or even both lol
|
|
|
|
|
|
teckyang97
|
Oct 15 2015, 09:23 AM
|
|
Hello guys,planning to get a 2nd mod.Between IPV D2 and Smok X Cube 2,which one should I pick?
|
|
|
|
|
|
jayro_88
|
Oct 15 2015, 09:37 AM
|
|
Anyone here use Cloupor mini plus? Never had or used Cloupor GT but but they said it is a smaller version of it.
|
|
|
|
|
|
AceCombat
|
Oct 15 2015, 10:35 AM
|
|
Hi guys, been vaping for years. A very light vaper here. So using entry level equipment only. IPV Mini II 70W + Lemo II
|
|
|
|
|
|
noodlecore
|
Oct 15 2015, 10:41 AM
|
Getting Started

|
QUOTE(teckyang97 @ Oct 15 2015, 09:23 AM) Hello guys,planning to get a 2nd mod.Between IPV D2 and Smok X Cube 2,which one should I pick? other than those 2 u hv mentioned, you might want to consider vtc mini from joyetech as well..
|
|
|
|
|
|
mi-g
|
Oct 15 2015, 10:42 AM
|
|
QUOTE(jayro_88 @ Oct 15 2015, 09:37 AM) Anyone here use Cloupor mini plus? Never had or used Cloupor GT but but they said it is a smaller version of it. i win one from a giveaway.. still waiting them to post it
|
|
|
|
|
|
TSekudz
|
Oct 15 2015, 10:49 AM
|
|
|
|
|
|
|
|
jayro_88
|
Oct 15 2015, 10:53 AM
|
|
QUOTE(mi-g @ Oct 15 2015, 10:42 AM) i win one from a giveaway.. still waiting them to post it   quick quick wanna know review. Can join with D2 and Evic VTC mix.
|
|
|
|
|
|
gunners_my
|
Oct 15 2015, 11:43 AM
|
|
back to fasttech since RM up a bit...
folks... kuro koiler / coil master... which one is better? Or.. any alternatives besides these two? I heard kuro koiler not easy to use...
thanks for advising...
|
|
|
|
|
|
jayro_88
|
Oct 15 2015, 11:51 AM
|
|
QUOTE(ahmad santan @ Oct 15 2015, 11:48 AM) buy vtc mini. ipvd2 is quite heavy for its size. +1 My go to mod. I prefer Evic mini rather than D2. And Cloupor Mini Plus also can consider.
|
|
|
|
|
|
ralli_art
|
Oct 15 2015, 12:07 PM
|
Getting Started

|
QUOTE(ralli_art @ Oct 11 2015, 08:00 PM) hi all... my friend have a almost new (used for 3 days only) Billow V2 Silver color to let go. (Original) reason: he don't really like it. prefer to use dripper. PM for details. Thanks. nobody interested?
|
|
|
|
|
|
Xirality
|
Oct 15 2015, 12:19 PM
|
10k Club
|
QUOTE(VapeJunkie @ Oct 14 2015, 10:15 PM) Hey guys, first time poster here, never realized LYN vaping community is so huge till got 20+ threads lol. Been vaping for abour 1.5 years now, wanna change mod to vaporshark DNA200 or Lavabox 200, which one do you guys prefer? Heard Vaporshark got 2A inbuilt charger and Lavabox only got 1A, but Lavabox looks so much cooler lol. Hard to decide! Definitely VS, their quality is top notch but finishing not perfect.
|
|
|
|
|
|
teckyang97
|
Oct 15 2015, 12:20 PM
|
|
QUOTE(noodlecore @ Oct 15 2015, 10:41 AM) other than those 2 u hv mentioned, you might want to consider vtc mini from joyetech as well.. QUOTE(ahmad santan @ Oct 15 2015, 11:48 AM) buy vtc mini. ipvd2 is quite heavy for its size. Why ya?Actually based on specs,Xcube 2 is the best,but then my friend said the board and firing sucks,is it true?
|
|
|
|
|
|
wan.ridzuan
|
Oct 15 2015, 12:24 PM
|
Getting Started

|
how much for evic vt mini?
|
|
|
|
|