how much is ur temp using core temp... use core temp to get more accurate temp... my 170 only doing 2.5ghz at 1.4vcore, 2.6ghz need 1.525v...zzz but in my opinion, i think 2.5ghz not much diffrence with 2.6ghz rite? so i juz pump 1.425v for my cpu to run at 2.5ghz... dun dare to risk my cpu at 1.5v + juz 100mhz increment...

This post has been edited by lichyetan: Nov 20 2006, 09:19 PM

mine currently 2.5ghz on water, 44c-45c load during raining day, hot day probably bout 46c-49c depends on my room temp.. i tried 1.525v before, reach 48-50c for core 0 and 49c-52c for core 1, u on air cooling rite? must be good heatsink, xp-120? btw, my room temp is 30c to 33c, i think... cause last time at my cousin house my old opteron144 run at 35c max load, 29c idle using core temp!!! lol...

ya, i also having same here, temp report frm smartguardian lower by 10c... btw, my opty170 now running 45-48c max load at 1.425v.. @2500mhz... want go for 2600mhz but dun dare to put 1.5v on it...

my water cooling kit which consist apogee waterblock not so well... although the temp are stable at 48c-51c, both core same, keep on fluctuate @ 1.525v, but i also dun dare to go for 1.6v... too dangerous for the opteron dual core... lol... btw, currently 24/7 using 1.425v @ 2500mhz

This post has been edited by lichyetan: Nov 22 2006, 04:49 PM

i also wish i can get a better steppings... lol ... btw, now running 1.525v 2600mhz, could it safe for dailly use?

passed pi ady. problem with my ram, forgot to loose the ram timings...here is screenshot with 8 hours prime stable...

This post has been edited by lichyetan: Nov 23 2006, 05:13 PM


Attached thumbnail(s)

currently down to 2.53ghz again on 1.400 + 102% VID... lol... find out that my acbel 550w generate lotsa heat when running 1.5v++... and also weird problem happen... random shutdown... my Lanparty Expert in SLI... plug in da 8 pin plus 4 pin floppy to power the board also no diffrence.... maybe PSU not enough juice, but i wonder acbel 550w intelligent series cant hold a rig with 3 HDD + 2x7600GT??? twice ady it shutdown@2600MHZ once is playing games and another is BT for few days without turning off... still havent figure out da problem... maybe increase other voltage might help? anyone face this issue before?

change the fan to evercool at my radiator, previously was nmb 80++ cfm fan, now pc more silent but temp rises 1-2c... , i also wish to add 1 cheap psu but no room in my casing ady... lol
nw, hmmm... quite statisfied at 2.53ghz... almost same as 2.6ghz with less voltage... juz a littile slow compare to 2.6 according to benchmark software...

This post has been edited by lichyetan: Dec 2 2006, 02:52 PM