If u like 65% layout, there's still other option available and cheaper despite of alu case.

1. Redscarf II+ Ver.C (RS68) kit = 680rmb
*No macro keys support, media keys support unsure.
http://world.taobao.com/item/521123137875....0.pCYfhA#detail
Can't remember if the gb closed order or not.

2. Finger L3 by leeku = 40~45usd.
*Under geekhack groupbuy section, closing soon.

Poslaju it

Who is Alvin Tan?

If the PCB is only for plate mount, you can clip off the 2 plastic legs of your gateron switches by using plier/finger nail cutter to make them fit.

That's odd, mine was 2nd batch doesn't have such issue.

Yes, it supports any MX switch (Kailh, Cherry, Gateron).
RGB LEDs not compatible for individual switches, its only for bottom of the PCB.

If other keys are still working fine, probably just the switch dead.
You can test them by removing your keycaps and unscrew the pcb from your case.
Then use a tweezer or wire (as long as it is metal and allow conduction) to connect this two points and see if there's any key input on your pc or not.


This post has been edited by hmwgbworld: Dec 5 2015, 10:37 PM

3 legs mean plate mount type
5 legs mean pcb mount type, it has extra 2 plastic pin to mount on pcb firmly without the need of plate.

Yes, you can. As long as the PCB have this two extra holes to allow it.

In case there's no extra 2 holes for the plastic pins, u can cut off the extra 2 pins and mount with your plate.

This post has been edited by hmwgbworld: Dec 14 2015, 10:38 PM

If you don't need macro/media keys support, you may get a 60% pcb from taobao(china maker).
However, please avoid gh60 pcb by satan because it tends to have bug.

I still prefer korean pcb somehow as they are generally well-developed and ready GUI for keymapping, although it is more expensive.
Example: Nerd 60%, B.face, B.thumb, FaceU, Eagle etc

GON have stabs on his store as well.
For soldering smd diodes and resistors u can search youtube. Watch a few times then try it after u feel confident.

I'm sure there's resistor and diode symbol on the pcb to indicate which u should solder on accordingly.

Metal case worth as weapon/defensive item when you are typing suddenly intruders come.