Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

> LYN OFFICIAL VAPING THREAD V26, It's Time to MoVe

views
     
SX vapor
post Aug 16 2015, 08:24 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(glamour @ Aug 16 2015, 03:34 PM)
Yes. Make sure is the latest firmware when buy.
*
May I ask what's the latest firmware version?
SX vapor
post Aug 16 2015, 08:26 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(Vail @ Aug 16 2015, 07:47 PM)
user posted image
http://www.vaporshark.com/dna/dna-200
wub.gif
edit:1 week to go before shipping starts
*
Hmm use lipo? Not much spec listed. Any news on flask?
SX vapor
post Aug 17 2015, 07:40 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(que0788 @ Aug 17 2015, 04:14 AM)
I think its gonna b pushed back..preston knight announced at ECC that the flask sx's production is gonna b pushed bck bcoz "theyre not satisfied with the finish"..sweat.gif
I think the VF 200 will b pushed bck as well then

I think it's finally time to retire my lemo..wuts d best rta for flavor but cn still lung draw? Russian 2.0?
Fyi bad experience with subtank v1..asyik meleleh je
*
Oh that's good news to me too as I would rather get a perfect finish device rather than those nano coating peeling off. Meanwhile give me some time to save up for P3. 😝

Any flavor tank can do lung hit just a matter of how u do it. I can do direct lung hit on my K4 even though the airflow is not that big but now I really like my K4 and leaving all my other tanks on the shelf!

This post has been edited by SX vapor: Aug 17 2015, 07:44 AM
SX vapor
post Aug 17 2015, 10:35 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(nekkidgramma @ Aug 17 2015, 08:38 AM)
If you don't wanna deal with leaks (too much), go for the Taifun.  Kayfun v4 is very good but if you get a shitty clone it's gonna be hell on Earth. Flavour is about the same in both imo
Leaking with subtank v1? Huh, never had that problem before. It's like impossible to leak seeing that the juice flow channel is kinda small so the vacuum inside the coil chamber is solid. Maybe you're not using enough wick
*
My K4 used to leak when it likes to. But after turning the o ring at the bottom of the deck, it's perfect. The more I use it the more I like it. When u get used to its filling method I like it more than any other tanks I own as there my hands wouldn't get a single drop of juice stain.

My taifun GT-T V2 is on its way. I think it would be as good.
SX vapor
post Aug 18 2015, 07:31 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(zen_analyst @ Aug 17 2015, 04:05 PM)
Bro, can u share where u buy the tank?
*
FT. I think I might get a authentic one later on as I like it so much.

Hehe Vape Mail arrived yesterday Kayfun Monster, Goblib mini, Zephyrus, Silverplay, Cthulhu (vail the kuku with the same SKU, mine turns out pretty all rite in terms of build quality)

Anyone can share your setup on the Goblin mini and Kuku.
SX vapor
post Aug 18 2015, 07:56 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(gunners_my @ Aug 17 2015, 05:49 PM)
my side also ok... with SG post twice already, so far so good, all received within 2 weeks...
*
I think most important is to make sure u don't have more than one package shipped out at the same time. The reason mine held by customs was because 1 was shipped a few days earlier than the other. End up both were on the same batch. The problem is 1 package is about an A4 size envelope and the other 1 is about 30% bigger but both declared value on the envelope are USD20. Even myself find it hard to convince. Previous small orders are all ok except this as I got some bulky items. Hope it helps.

I am too curious how FT ship out like Singapore post for example. They ship out from HK to SIN but envelope states its from SIN. Hmm. Like batteries via Sweden Post, the battery actually sent from HK to Sweden then to final destination? And why only Sweden post except batteries. Strange..
SX vapor
post Aug 18 2015, 08:38 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(nekkidgramma @ Aug 18 2015, 12:50 PM)
Daamn that's almost all my wishlist right there, minus the Goblin mini tho. drool.gif
My Kutu-lu tank setup 26g/9 wraps, dual coil at 2.5 mm. Blast it at 35-40w and the flavour is jas nice. Dunno about the other ones tho. Can't really keep up anymore with new toys churning out faster than babies at Tibetian whorehouse sweat.gif
*
M using Goblin Mini with Mec Mod Castiogador rite now as I type. Man I love this Goblin mini. Flavor and vapor are good. No leaking.
SX vapor
post Aug 19 2015, 10:40 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(SonnyCooL @ Aug 18 2015, 09:40 PM)
good ar ? thinking of pairing it with lepetit .... make it smaller and shorter set smile.gif
*
Yup I like it very much as its small and transparent yet give good flavor and vapor. I just wick it like I normally do on any RTA like Goliath or Zephyrus. Go get one and u will know.
SX vapor
post Aug 19 2015, 10:43 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(st4Lk3rz @ Aug 18 2015, 10:25 PM)
I got that K4 and just added the lite plus V2 few days ago. Hehe.
SX vapor
post Aug 19 2015, 10:47 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(nekkidgramma @ Aug 18 2015, 11:55 PM)
I've heard a lot of good things about em, yes. Been meaning to match one with my D2 but come on man bottom filling? Nope. Passed on KLF and the Orchids because of that. Mess up your wick and hello Floodtown. Population: You. Ain't worth the hassle and with dual coil, I bet it's a slut for juice. At least the Cthulhu is top filled even it need a top up an hour or so.
*
First time owning bottom fill atty too. I found it way easier than to screw open the glass like subtank mini. Same thing goes for my Kayfun Monster. It's actually easier to fill for me. I heard a lot about leaking like a bitch but mine doesn't. I actually close the airflow last nite and wake up not a single drop of juice. Just some condensation at the bottom that's all. Anyway it's up to u guys to decide as m just sharing that I like it very much.
SX vapor
post Aug 19 2015, 12:03 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(mi-g @ Aug 19 2015, 12:56 AM)
HAHAHAHHAHA ya loh.. deswai i sell away my KF4.. good flavor but too much hassle la when its come to maintenance
*
Actually there is no need to break down every single part for maintenance, just the tank section and chimney. Maybe it's just me I start to like RTA with as many parts as possible. Like I mentioned before it's top fill is the easiest refill of all once u get the hang of it.😆
SX vapor
post Aug 20 2015, 06:53 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(fauxfides @ Aug 19 2015, 09:28 PM)
Quick question on the drip tip. Doesn't the holes do more harm (or rather only aesthetically pleasing) than good? Not sure how this one functions but if it's the same with every other AFC drip tip, even with it fully closed you'll lose some flavor due to the excess of air escape holes.
*
I thought it's just me with this issue. These 2puffs drip tips doesn't fit tightly on my atties due to its o ring and I stop buying them.
SX vapor
post Aug 20 2015, 07:03 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(fauxfides @ Aug 19 2015, 09:51 PM)
SKU 1215700 Rated 1.5/5 - These shear cutters are more like crap cutters. It does the job but the finishing on it is horrendous. Then again, it isn't very costly.
It just arrived yesterday and I m using them last nite. Yes looks cheap as it is cheap but they cut my cotton rather neat. Thx to u. 😜
SX vapor
post Aug 20 2015, 09:01 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
Saw on other forum that South Coast Vape - Nipples Milk are better than Milkman/ unicorn milk. Anyone knows where can I get them locally?

Taifun GT2 vs Kayfun V4 :
Both loaded the same juice - Bells Brew Orange Marmalade into both to make a comparison in terms of flavor. Taifun somehow brings out more fragrance of orange while Kayfun has this unique after taste upon exhale (something like a small note of cream). It's hard to describe as both tanks tasted differently. Well that's what I am looking for and that's y I bought it. Maybe it's the new coil in Taifun so shall let it break in for a couple of refill and see how. Anyone has a similar thought on this? Vail how to best describe them as I m not that good at writing on taste. Lol.

This post has been edited by SX vapor: Aug 20 2015, 09:03 AM
SX vapor
post Aug 20 2015, 10:37 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(selvenz @ Aug 20 2015, 09:41 AM)
for bells brew ruby snow is better, dont quite like orange marmalade
*
Actually I only like its breakfast crunch, don't like this orange marmalade and ruby snow. But wat to do it's the only premium local juice I hv left.
SX vapor
post Aug 20 2015, 03:43 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(all blacks @ Aug 20 2015, 03:20 PM)
Just bought Taifun GT2, let me try thee same juice wic I have on Kayfun V4 on my P3 n see if it taste different..
*
Can't wait for ur review. Definitely better than mine haha.
SX vapor
post Aug 20 2015, 03:47 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(mrbs84 @ Aug 20 2015, 12:50 PM)
Here the link, local shop. Review said it's more on strawberry less milky. But a good deal for 180ML.
*
Anyone tasted this before. Do they only sell 180ml? Would love to try on a 30ml first if not wasted if I don't like it. I assume it would be better than milkman or similar to Mothers milk?
SX vapor
post Aug 21 2015, 04:27 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(all blacks @ Aug 21 2015, 11:14 AM)
SX vapo I have to agree with u on the different vape produced by both the tank.. I setuped both at 1.4-1.7ohm range and tested it using Vaping Birdy lychee mango flavor..

With the Kayfun V4 (airflow fully opened), u can feel the lychee flavor when you inhale and slight taste (very little) of mango during exhale... In the Kayfun I realize tat most of the time the underlying flavor is very light..

With the Taifun GT2, there's more of mango flavor than lychee so it tasted very different.. however exhale was slightly muted and I guess it's mainly due to the airflow.. With having only 1 or 2 holes left opened at each side, the airflow was comparable to Kayfun but with 3-5 airflow, the tank became cloud chaser but less flavor.. This tank brings out the underlying flavor more...

Gone continue playing with the watts to find the sweet spot for this tank.. Kayfun sweet spot for me is at 1.4/1.5ohm and 13.8/14 watts...
*
Yup ur description is much well written than mine. Both tasted differently. Come to airflow, Taifun is much much more airier even at 2-3 holes. I just loaded my last bit of milkman into Taifun and strangely I found it somehow muted and doesn't taste as flavory as Kayfun which makes me wonder.

Also I do realize that wicking Taifun needs to be precise else it will dry hit. I just changed my wick and saw its burn with some juice not flowing at the area just beside the coil as its whitish in color. Need to read up on how to wick it properly. The cap above the coil needs to be pulled up to the max without popping out and this cap also can't screw too tight in.

SX vapor
post Aug 23 2015, 08:18 AM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(fauxfides @ Aug 22 2015, 03:00 PM)
Subox will be replaced by the upcoming Evic TVC (Mini Evic) smile.gif

Edit: Added YouTube video for reference - https://www.youtube.com/watch?v=ayHxt1v25S0
*
Arranging any GB on this?
SX vapor
post Aug 24 2015, 01:20 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
QUOTE(xhakox @ Aug 24 2015, 03:36 AM)
Just got my Kayfun Monster v2 from VE.

Currently using chimney build that I built myself. Flavor is good, kinda had a hard time trying to tighten the coil legs because of not used to it.

Could anyone here who uses the same tank as me suggest me a good build? I don't mind trying it over and over haha
*
I am using a 28g Ni200 2.5mm 6-7wraps (intend to do 8wraps but I cut the wire too short and lazy to change) at 0.90ohm. Good flavor and vapor thanks to my brah here for the recommendation yeah.

3 Pages < 1 2 3 >
Bump Topic Topic ClosedOptions New Topic
 

Change to:
| Lo-Fi Version
0.0303sec    0.65    7 queries    GZIP Disabled
Time is now: 29th November 2025 - 11:42 PM