Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Proton Prevé V23, Livin la vida loca

views
     
tehsarbat
post Sep 27 2015, 07:59 PM

New Member
*
Newbie
0 posts

Joined: Jun 2013


QUOTE(SportyHandling @ Sep 27 2015, 05:56 PM)
Did anyone encounter this with your car? When I was parking my car this afternoon, switching from D to R, this time it is not the plastic silver piece that comes off but the whole gear knob that came off. First time I experience this sort of quality issue which is a laughing stock. When the gear knob came off, I put it back in but could not change the gears due to misalignment. I then pulled the gear knob back out and stuck it back in again and luckily can shift the gear knob as normal after that.

This is just terrible. I did not expect this to happen although I am aware that the gear knob on this Proton Preve Turbo is poor in quality.

user posted image

user posted image
*
doh.gif
tehsarbat
post May 28 2016, 07:27 PM

New Member
*
Newbie
0 posts

Joined: Jun 2013


[quote=xrickx,May 27 2016, 01:44 PM]
Hi Sifu's,

My car seems to jerk and do not want to move when i just shift from P to D if i step on the accelerator about 60%. I will need to give the car about 4 sec than throttle very slowly..probably about 10-20% than only it will move. Once its moving, no issues at all... is this common for a 2012 preve exec?
*

[/qadaptat

Cer try buat cluth adaptation
tehsarbat
post Oct 27 2016, 10:20 PM

New Member
*
Newbie
0 posts

Joined: Jun 2013


QUOTE(imnotabot @ Oct 27 2016, 04:28 PM)
Hi guys. I'm driving a Preve 1.6 Executive CVT Auto, which was bought around 2014.

Some background: I don't know much about cars (other than how to drive them  tongue.gif) as previously I've been driving my parents' car, so I didn't give much thought about it. But early this year I've been driving my wife's car (just got married), and since I'm the one driving it most of the time, I think it's my responsibility to learn more about the car and take care of it so that it will last longer.

So recently there are some issues with my Preve which I find quite worrisome:

1. This happens sometimes: when the car is standing still and I step on the gas pedal, I can hear some sort of grumbling sound (like a drum roll) and the car will shake a little bit. When this happens, usually I will step a bit harder, and the car will suddenly lunge forward. There was one time I actually tried not to press harder and let the car continue grumbling, after a few seconds the engine actually died. Thankfully, I was able to start the car again. I complained about this issue to the mechanic once during service, but nothing has changed (not sure if the guy understood what I was trying to say though.)

2. This also happens sometimes: when I'm driving downhill (can't quite remember if this happens ONLY downhill though), the engine will suddenly start roaring as if I'm pressing on the gas pedal really hard when in reality I'm just driving 40-60 km/h. I have to release the gas pedal for a few seconds to make the roaring stop.

Anyone have any idea what's wrong with the car?
Or can anyone recommend me a place to get my car checked up? I live around Seri Kembangan.
*
1) try apply clutch adaptation
2) safety feature
tehsarbat
post Oct 29 2016, 11:19 AM

New Member
*
Newbie
0 posts

Joined: Jun 2013


QUOTE(imnotabot @ Oct 28 2016, 08:50 AM)
Glad to know the second one is actually a feature! So do I need to bring it to SC and ask for clutch adaptation? Or is it something I have to do myself? Can't find much info online.

Also, I just reset my average l/100km yesterday after refuel, and after some driving last night and going to work this morning, I got 8.3 l/100km. Is that considered okay?
*
I diy once a while...its a easy steps... if u not sure maybe can ask u're sc to do it during servising...btw i driving exora bold... its the same powertrain... only different tuning... and my bold clocked almost 5 yrs... havent got that problem yet...
If its still accured... then try to check the OWV...

And for the fc... i think its quite resonable for heavy traffic... it could be better for a long highway drive...


Attached Image
It has to be done at normal engine tempreture after warmed up...

This post has been edited by tehsarbat: Oct 29 2016, 11:32 AM
tehsarbat
post Nov 9 2016, 08:53 PM

New Member
*
Newbie
0 posts

Joined: Jun 2013


QUOTE(_dan @ Nov 8 2016, 10:22 PM)
Has anyone encounter noisy sound(gluk gluk sound) when car is in idling or RPM below 2000. The sound come from engine compartment at passrnger side. I hv asked SC, they said it is normal for preve to hv that sound. Is it true?
*
CVT characteristic... yeah its a bit annoying at first... but i lived with it for almost 5 yrs... get used to it already... not to worry... its only a sound...

This post has been edited by tehsarbat: Nov 9 2016, 09:51 PM
tehsarbat
post Nov 18 2016, 06:58 PM

New Member
*
Newbie
0 posts

Joined: Jun 2013


Future prevè
Attached Image Attached Image


Attached thumbnail(s)
Attached Image
tehsarbat
post Nov 18 2016, 09:48 PM

New Member
*
Newbie
0 posts

Joined: Jun 2013


QUOTE(stasio @ Nov 18 2016, 07:23 PM)
2017?
*
Its still at a proposal stage... maybe will paired wthh the new 1.5 TGDI engine... 180hp@250nm...

This post has been edited by tehsarbat: Nov 18 2016, 09:50 PM

 

Change to:
| Lo-Fi Version
0.1260sec    0.39    7 queries    GZIP Disabled
Time is now: 7th December 2025 - 11:42 AM