congrats ! what year model did you get?

Any advise on radiator fan and fuse box issue？ Seem it is common problem. How to prevent this issue occur?
- this can happen if AC is abused or if coolant and other liquid are overlooked and not maintained properply.
- also do best practice off turning off AC before shutting down engine and start engine with AC off when trying to warm up your car.

Hey guys, can anyone recommend me some good workshop?

Going for normal service & change timing belt.

KL Selangor area

https://www.facebook.com/tunersrevolutions/

recommended 100%

I'm getting with the 2015 model.
After 4 days driving, everything just fine except there is wind noise at left side c pillar, I can hear it when cruising about 80-90kmh..

that's weird , usually mine is quiet.
better check the door rubber seals if still okay

rubber seal only.....
go buy yourself cheap cheap on lazada or car accessories shop, reapply those rubber with 3M tape

Which side of engine mounting that is more prone to wear? Is it the front one? Or rear? Or both?

Found your post after searching. Which one did you change bro usually? Rear, front?

CVT mounting.. i searched back my service history..description is BRKT ASSY, TM MTG CVT; T/M MOUNTING REPLACEMENT

basically let proton technician test drive and check for you.. mine one last year have 1 recalled part for CVT damper if not mistaken.. so after they took off the things and reinstall back, i felt the vibration.. so i decided to change CVT mounting..

just around RM150 things.. to me it is okay to change rather than have little vibration..

This post has been edited by ChuanHong: Dec 18 2020, 08:46 AM

Thanks bro. Is rm150 include labour cost?

My case is a little diffetent. I already change almost all suspension parts, even the brake caliper pin but still have noises on uneven road (kruk krak) on left side, not lower arm for sure coz already changed and kok sound after bump somewhere is centre. And banging sound when i stopping the car. But the vibration also got but not much.

Last year i changed the engine mounting TCA brand, abit regret it, the left n right mount still in good condition. Only the black colour mount worn out a bit. This time will change one mount only first.

Few months back i drove over a very huge pothole, after that all these nonsense and weird noises came out which still cant be solved yet

This post has been edited by clockpulses: Dec 18 2020, 11:28 AM

your casing is not mounting issue ba.. mounting is for vibration during idle mode.. is there any items inside drawer? in my car, i have a place a rubber mat in all drawer or location that i will put an items.. so it will not cause the noise that item hitting the rubber case. if drove over pothole, try to look at your absorber, wheel bearing, and tyres..

This post has been edited by ChuanHong: Dec 21 2020, 10:27 AM

Thabks for your reply

I dis remove all items inside drawer and test drive, nope the sound was not from the drawer, it was from the wheel. I changed all things already except for wheel bearing. Looks like i have to spend again haih looks like neverending

wheel bearing can be check by any tyre shop.. or go abck to proton sc and let them do inspection.. cause noise is something hard to fix without knowing root cause..

Anyone here installed oil pressure gauge for OCH burst indication?
If yes, using the sandwich adaptor at oil filter? So far any issue?

hi guys, anybody here intalled the TM WORKS VSD 16V in your preve? looks interesting to maintiain the voltage level in the ignition

You saw this from dréx / ea workshop ya?
Did some Google fu earlier... But don't think it will affect hp directly, not much info out there at all. Do share if you actually tried it out.

Im not into performace much, but it does shows some improvement on dyno charts...im more interested in the voltage supplied not dropping whenever i turn on aircond etc...like right now, if i want to go abit faster, i usually turn off aircond to get some "power" 😂

I'm puzzled with this weird krok krok near my left front tyres.

Krok krok on uneven road, not lower arm for sure

I've changed almost all suspension parts. Last part was brake caliper pin

What is this mystery sound?

Brakepad loose? Or Is it coming from inside like glovebox rattles? I can't tell and I'm confused

Even my mechanic cannot figure out.

This post has been edited by clockpulses: Jan 15 2021, 08:57 PM

Hi guys, anyone know wat is the hood insulation clip proton is using? I lost mine when i took it off but lately got into accident and change the bonnet.. or if anyone can take a photo of your hood insulator clip and share with me.. thanks.

I have slightly different problem.....
when I rev car to overtake, my car become sejuk