Mari kita belajar build Ni200 dual coil untuk Billow v2. dengan Uncle Muffins! 

Step01 : Use 32awg nickel and make 2 x 8 wrap spaced coils.


Step02 : Install it into the Billow's deck. I don't bother to try and center my coils because it's a hassle trying to bend Ni200 and maintain the space between the coils.
So, senget a bit I don't care la. Janji keluar vape.


Step03 : Wick and vape! (I actually trimmed the wick a bit after the pic was taken. Too thick, couldn't screw close the chimney


Step 04 : Enjoice! Resistance is 0.16ohms. Was aiming for 0.15. Ok ah, off by a little bit.


Sekian, Terima Kasih!

Evic vt. 30 awg takde masalah. More wraps that's all, maybe 10 wraps per coil. I'm using 3mm diameter screwdriver.

In my few months experience... apple crumble is e best juice ive tasted.....
U know of any similar juices...

is there a clone IPV4s in the market now ?

Hi guys... anyone here are using sigelei 75watt temperature control?

Is it good?

Thinking to jump into temperature control mods.. but I prefer to not spend too much for mods now..

ipv3 li seems to big for me... ipv4 dont know the tc features ok or not.. sx mini, need to wait 5 month more to buy..

I using sigelei75w. Everything function well. Well built mod. Lots of good review from those youtube review video. Go and check it out. Only con is battery drain quite fast if heavy use.