First page hnnghhh....

my DIY coffee ejuice macam perah air dari kain lap meja orang tertumpah kopi o.

you can't. I build spaced coils so i don't have to worry about hot spots. but yeah ni200 is soft as shit. good luck

Mari kita belajar build Ni200 dual coil untuk Billow v2. dengan Uncle Muffins!

Step01 : Use 32awg nickel and make 2 x 8 wrap spaced coils.


Step02 : Install it into the Billow's deck. I don't bother to try and center my coils because it's a hassle trying to bend Ni200 and maintain the space between the coils.
So, senget a bit I don't care la. Janji keluar vape.


Step03 : Wick and vape! (I actually trimmed the wick a bit after the pic was taken. Too thick, couldn't screw close the chimney


Step 04 : Enjoice! Resistance is 0.16ohms. Was aiming for 0.15. Ok ah, off by a little bit.


Sekian, Terima Kasih!

Since you've been asking so long, here's a list of 0mg / High VG fluid I've found and tried.

Fcukin' Flava Fcukin' Clouds - Light Blue (Honeydew Bubblegum) and Light Pink (Tutti Frutti) - these should be available almost anywhere Fcukin' Flava is sold
E-Fog - blueberry - Vape Empire has this. not sure if all the branches still has stock, call ahead and ask.
Sub Ohm (terrible looking label design) - various vape shops carry this, a little rarer compared to the other two above.

Also, Black Vault in SS15 Subang has their own range of liquids, Banana Butterscotch is 3mg (light enough to be negligible to an ex-smoker like me but you may find a slight throat hit). I really like this juice but chain vaping this kills my tastebuds. I'm assuming a lot of EM in it.

Vapor Hub has been selling the eVic VT mod only for 240 for some time. Most vape shops in Subang following the same price now due to competition.


https://www.facebook.com/pages/Vapor-Hub-Su...1675632?fref=ts

This post has been edited by Muffins: Jul 20 2015, 11:18 PM

Tablecheck!
#morethanmeetstheeye

Lol thx. Couldn't find any in stores so I printed out the logo stuck it on a piece of car decal and cut it out by hand. Senget a bit but it works for me.

I build spaced coils for my nickel builds simply because it's not advisable to dry burn and kepit kepit nickel to eliminate hot spots. Spaced won't get hot spots unless your coil senget and two or more wraps are touching. Kanthal builds I'll make contact coils. Looks pretty when it's glowing from the inside out.

You can try a twisted ni200 coil for the subtank. I use 32 awg. 30 is also doable. Twisting the wires stiffens it, but reduces the resistance by a little less than half. I usually aim for between 0.1 - 0.2 ohms for nickel builds.



Tutorial to make twisted wire without a drill --> https://www.youtube.com/watch?v=yZhFFH69XaE

No. if your coil heats up to the point where nickel degrades, thats dangerous (poisonous fumes). When the cotton and juice is in your coil, it never gets red hot.

There's a Muji in Sunway Pyramid, Mid Valley, Pavilion and Avenue K. Once you find one with packets in stock, buy two, you're set for life.

I've heard stories that Sephora also sells organic cotton but haven't verified this.

For those using cotton thats brilliant white, those have been bleached with chemicals (or worse, made of synthetics ) I personally wouldn't vape that. Boiling is supposed to render it safe but I'd still not want to take a chance. Use at your own risiko gentlemen.

Organic cotton is off-white, almost a very light brown with tiny black biji scattered throughout.

Bleh, my Billow v2 tank cracked. Ordered replacement from Gearbest dot com. On SALE WOO USD3 for 2 pcs. Thats RM12 free shipping hnnnghh...

Lol he means rich vapers....

Evic vt. 30 awg takde masalah. More wraps that's all, maybe 10 wraps per coil. I'm using 3mm diameter screwdriver.

Billow v2 and Spittank mini. Kayfun v4 clone on the way from China. All tanks work well no problems.

Bee-nuts.


I'll show myself out, thx....

This post has been edited by Muffins: Aug 4 2015, 07:21 PM