Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

> LYN OFFICIAL VAPING THREAD V25, Now Can Vape Day Time. Selamat Hari Raya

views
     
JimL
post Jul 17 2015, 11:02 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(Barbossa @ Jul 17 2015, 10:17 PM)
Guys...I am planning to change my dripper coil...what coil should I should? and what are the safety precautions? I am really newbie here...please help
*
What mod and batteries are you using? What are you specifically asking? Lowest safe ohms to go?
JimL
post Jul 18 2015, 12:16 AM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(Barbossa @ Jul 18 2015, 12:04 AM)
I want to know what gauge kanthal wire should I get? I dont understand this ohm and resistance thing...not sure how i should build my coils
*
Let us know what mod and batteries you're using. Makes it easier for us to make a suggestion. Lower gauge wires will require more power and if you do not have enough wraps on your coil the ohms may be too low for your mod/battery to handle. Do you own an ohm checker?
JimL
post Jul 19 2015, 07:40 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(ahwang12321 @ Jul 19 2015, 07:25 PM)
Hello

Pls recommend a mod that worth every cent
Below rm350.. Got tank or only with mod also ok
*
Hahahahahahahahahahahahahahahaha Gasp! Let me catch my breath. Hahahahahahahahahahaha.............

Worth every cent? Think of it as a toy. In two weeks or a month, you'll see newer shinier toys!
Then your old worth-every-cent gear will feel like junk. Just ask VAIL!!

JimL
post Jul 19 2015, 09:15 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(ahwang12321 @ Jul 19 2015, 07:54 PM)
Haha ok then just recommend me anything good below 350 that have nice design
I hve been using cloupor mini for few months
I hate this mod because of the ugly design and the color is easily i dont know how to say in english..senang kena kikis..now it looks so ugly
But at that time my budget is low and i think i got con by this bro

I was thinking about subox mini..nicely design and 50w but im not sure its worth to upgrade from cloupor..
*
You should consider getting a Temperature Control (TC) mod. Its the latest rage now. If your buddies switch to TC mods then you'd be left out if you have a Subox. Then you'd have to spend money again. The eVic VT should take care of your needs for the near future. Its new and shiny enough. But don't buy the complete kit, just the mod. Should be around RM240.
The other thing is size. The eVic is larger than your Cloupor Mini so its not so pocket friendly.
Me? I've mostly set aside my larger mods. I prefer small pocket friendly gear. My next set up will be the IPV D2 paired to a Goblin Mini. Theres no reviews on the IPV D2 as its not released yet. Don't know if its good or bad.
The D2 is RM245 in the group buy here. Goblin Mini is RM105 from Vape It.
Keep your Cloupor as spare. Wait for the Kangxin KX40D chip to be available then switch the chip. Then you'd have a second TC mod.

JimL
post Jul 19 2015, 10:24 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(ahwang12321 @ Jul 19 2015, 10:15 PM)
How bout smok xcube 2??
It hve tc /bluetooth/rgb light ..but the design seems like easily scratch ..anyway whats the market price for smok xcube?
*
The X Cube is quite big. Smok doesn't have a good track record with TC devices. You'll just have to wait for user reviews on it. The Smok M65 that I own is the worst mod I have.

Edit: If you like big mods then go for the IPV 4S or IPV 3 Li V3. RM 299 and RM 329 from Vape It.

This post has been edited by JimL: Jul 19 2015, 10:30 PM
JimL
post Jul 19 2015, 11:15 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(fauxfides @ Jul 19 2015, 10:55 PM)
Shameless plug here Jim. Anyway it's leaking like a bitch. I reckon I messed up the wicking somehow.

Twisted 28/28 Kanthal on 2.0mm ID comes up to about 0.35ohms

user posted image
*
I'm pretty sure 'Leaking like a bitch" is not a wifey approved phrase! But if its leaking then yeah its a wicking issue.

JimL
post Jul 20 2015, 10:32 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(deadmanwalking1 @ Jul 20 2015, 12:48 PM)
Anyone here know where can i get UD Goblin RTA V2 ?

Went to Vape Empire but they only sell goblin mini(RM120) which im not so keen.
Klang Valley area
*
https://www.facebook.com/BabyxanderGallery

https://www.facebook.com/elektronik.rokok.7

JimL
post Jul 21 2015, 01:26 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(franlow @ Jul 21 2015, 09:55 AM)
Hi sifus,
I decided and went for the UD Zephyrus tank and got it last week. Set up the tank and used 50/50 juice. All was good. No leaks and flavour was good. Loved it.

Two days ago I changed the wick and used a higher VG juice. I could not seem to get it right. Kept on getting dry hit and wick burnt.

I changed the wick many times still can't get it right.

Any advise? About to give up on the tank.

TQ
*
Is the cotton too tightly packed? If so, thin it out a bit for higher VG.

JimL
post Jul 21 2015, 01:59 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(franlow @ Jul 21 2015, 01:48 PM)
Probably so. thanks will try again till I get it right.
*
No worries. You're gonna find Zephyrus/UD fanboys here. Here's a tutorial vid you should really look at. Note the coil leg placement. Also states to use less cotton in juice channels for higher VG juices.

https://www.youtube.com/watch?v=u4Ip6X6UpxM

JimL
post Jul 21 2015, 02:20 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(SX vapor @ Jul 21 2015, 02:01 PM)
Anyone knows what does hot legs means? (Nope vail it's not the hot sexy long legs! hehe)
*
You'll get hot legs if the coil is too far from the posts. If you want to have your coils far from the posts then its better to use NR-R-NR wire. Non resistance - Resistance - Non resistance. Fasttech sells NR-R-NR wires.
JimL
post Jul 21 2015, 02:36 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
@nekkidgramma, IPV D2 vid for you. No USB port for firmware upgrade. Expect to see P4U announce 'improved' IPV D2S after we have bought this.

https://www.youtube.com/watch?v=wNVsOhUwbe8
JimL
post Jul 21 2015, 03:00 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(Vail @ Jul 21 2015, 02:50 PM)
what a beauty. IPV mini 2 owners should definitely get this. (giving my self a reason)  sweat.gif
*
You of all people need a reason to buy new shiny stuff? Sky fall down!

JimL
post Jul 22 2015, 11:48 AM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(Sx91 @ Jul 22 2015, 11:34 AM)
That could be the case that the Rm550 is the sx mini c class without TC. Still thinking la before i pay.
*
There's clone M class sold on Alibaba which claims to have the 350j chip.

http://www.alibaba.com/showroom/yihi-sx-mini-m-class.html

JimL
post Jul 22 2015, 03:36 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(Sx91 @ Jul 22 2015, 02:59 PM)
Not from yihi factory for sure. They explain that the clone one is only the body. The chip is still the original sx350J from yihi. Im not sure about the build quality but u can read this http://www.shopvillagevapor.com/blog/sx-mi...-class-cloned-/
*
Loads of China mods claim to have Yihi chips. But its mostly cloned chips. Yihi stated that the SX350 range of chips would not be sold to any China company.
JimL
post Jul 22 2015, 04:02 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(Sx91 @ Jul 22 2015, 03:56 PM)
Thanks for the info. Surely im not going to buy the rm550 sx mini.
*
Unless you're really burning to buy a mod now why not wait to see what the DNA 200 has to offer? I'm pretty sure China companies especially Yihi is gonna counter with a whole new range of mods.

JimL
post Jul 22 2015, 05:41 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(sibun @ Jul 22 2015, 05:31 PM)
Wow. Now joyetech have upgrade the egrip oled to egrip oled-cl. More powerr 30watt andd can use clr ego one
*
30 watt hack

https://www.reddit.com/r/electronic_cigaret...pva/egrip_hack/

https://www.youtube.com/watch?v=6m28LtsJGRY

JimL
post Jul 22 2015, 10:07 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(cynical66 @ Jul 22 2015, 08:07 PM)
Just bought my FIRST vape..subox white starter kit..any advice for a newbie here, who dun even know a shit about it except charge, "press" & suck? LOL
*
First thing is your battery. What type are you using? Sometimes the shop will sell you batteries totally unsuited for your mod. Do you have an external charger? You switched to vaping for your health so you'd better learn the safety aspects first. It's for your health as well. Lol
Anyway welcome. You're gonna have fun. Expensive fun though.

JimL
post Jul 23 2015, 07:01 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(greztlife @ Jul 23 2015, 06:44 PM)
Need help, my mod smok m65 auto firing! Any guru here can help?
*
Unscrew the bottom to remove the battery. Obviously you've removed the atty?

JimL
post Jul 31 2015, 11:55 AM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(nekkidgramma @ Jul 31 2015, 11:45 AM)
Pfft. More like gym socks if you ask me. That damned truffle vmad.gif
Ooor you could hang on a bit since the Cthulu v2 is coming out on 8 Aug. Maybe we could ask a GB on that from fauxfides  rclxm9.gif
*
If only Cthulhu Mods could come up with an original design. The first Cthulhu RTA is a copy of the UD Goblin 1.2. The Cthulhu V2's deck/posts are copied from the UD Goliath.

JimL
post Aug 1 2015, 03:30 PM

New Member
*
Newbie
2 posts

Joined: Feb 2007
QUOTE(nukeblitz @ Aug 1 2015, 03:05 PM)
ok thanks...any problem i should expect from this mod?
#kipidap
*
Yeah the radiator fan sometimes doesn't work. And the steering goes left a bit.


2 Pages  1 2 >
Bump Topic Topic ClosedOptions New Topic
 

Change to:
| Lo-Fi Version
0.0246sec    0.55    7 queries    GZIP Disabled
Time is now: 26th November 2025 - 04:25 PM