https://forum.lowyat.net/index.php?showtopic=3055253&hl=

check tat link out...u can contact the seller..

bro, AFAIK manual gbx dont have oil level like automatic gbx.. u need to check with workshop.. manual version ya, rarely seen one too.. vios J is the only version got manual right?

u can try this model.. adayo, nice UI and interface.. can customize
i use more then 1 year already.. so far no problem..

scared JPJ will sue u for that..
if want more bright beam, u can use foglamp with HID/LED projector yellow color combine Osram Nightbreaker Plus for headlamp..
yellow color can help u during rain n at night.. while Osram Nightbreaker is 30% brighter then normal bulb...

I'm currently using Osram Nightbreaker for headlamp, unfortunate i tint my car slightly dark and caused low light vision.
Might consider to replace either fog lamp LED or HID.

owh.. yup.. better go with LED/HID foglamp.. no need projector as most projector with bulb is sealed already and u cant replace it with HID bulb.. if not u maybe need to do retrofit projector to ur foglamp if u wanna use HID/LED bulb..

Hello vios user,

I'm planning to buy the new 2015 vios. Is there any problem on that car?

Engine Mounting / Roof ...

plan to buy new vios 2015 also...
but hear fren say will out new FL soon...
still waiting to see its fake or real ~.~

thought roof problem settle already? its only for 1st batch right?

engine mounting? whats wrong with it ya? care to share..

This post has been edited by amad108: Aug 24 2015, 07:02 PM

Can't really comment on the roof issue since I never take any ride of batches before. Most of the new batches this year already have one layer of sound proof material installed, the annoying molotin sound should be minimized.

As for engine mounting issue, when go through the speed bump especially those plastic type, u will hear the kok kok sound. This cannot be solved at the moment according SA.

Regarging the kok kok sound is it too loud? Or just like a plastic knock sound?

it is loud.

speed bump and those uneven road when u drive around 20km/h, u can hear that.

Hi RoxyMunky,

I'm experiencing slight vibration when I press brake pedal after the speed of 40km/h ? Do your experience this in your car ?

I let Toyota SC check on this, according to them my disc rotor is still even and not sure what is the caused of this.

my Vios so far don't have this issue.

normally such vibration incident upon braking is caused by disfigured disc rotor, or the brake caliper piston is not functioning well, or the brake pad itself is not evenly applied to the fittings.

my Focus had this issue earlier on. The front trembles upon aggressive braking from speed around 60kmh down to 10-20kmh... changed the disc rotor and its fine now.

hope above helps.

1. Engine mounting issue, is it ok if we still use the car? The knocking sound getting louder?

2. May someone share how much SC charge for normal and major service?

For the 1k service, I go for Semi Sync Engine oil which make up of total cost RM145.11 (Engine Oil, Gasket, Oil Filter)
I skip for the washer fluid as for me it is not needed.
Above price is exclude labor (Free labor for 1st and 2nd Service)

Share some video of ur newly installed 4 in 1 for members here too .

Good things must share

Since I still waiting from my fren to get it for me, do share your product to us on how to
install and the results after installed to benefits the members here.