wonder if hotlinking attachment works...
annddd nope it doesnt lol

https://forum.lowyat.net/index.php?showtopi...post&p=77475913
for bling bling black inspira lol

This post has been edited by Quazacolt: Nov 23 2015, 09:53 AM

nice oh, yr car blink2 again.
yesterday took me a lot of time to take out the fuel filter container.




after inspect see is brown and not yet black, so assemble it back quickly. lucky engine still able to start on 2nd tries

nice work. yesterday I also did some express waxing to wax off the dirt (dirt that clearly to be seen on a white car) due to rainy season these days
and again is damn tiring lol

eh use QD's would be more effective to deal with dirt

I wan see Lyn Showdown!!!


Brian o corners VS Takumi K Fujiwara!!!

WilliamHoo

So its normal? 3rd day driving inspira. Previously drove iswara for 4 years..

Haha brian o conner juz to describe only

Engineering explained

its like shifting without letting go the throttle la
https://en.wikipedia.org/wiki/Powershifting

wa iswara driver also wo

You practice like this?

I mean after car wash still there is some black stain, and i need to use 'paste wax' to rub it then only cleans out the surface, spray QD and just wipe will work? Hmm, I still have the Sonax Highspeed wax, not sure does it work to clean out just by spray n wipe, coz my mind always think that will put a layer of protection and better water beading only lol.

Iswara drive by CABLE ..

Means u tekan how much, the cable directly pull the throttle body open how much ..



Inspira drive by WIRE..

Means there is a sensor at the accelerator pedal ..
1. it detects how much u press at the pedal..
2. it convert the pressure u press at the pedal into electronic signals ..
3. it sends the signal to the ECU ..
4. the ecu receive the signal ..
5. process the signal ... base on the mapping
6. send the output signal to the SERVO motor controlling the throttle body ..
7. The SERVO move according to the signal by the ECU.

So there is a LAG between the signal send from the accelerator pedal to the throttle body .. you need to readjust ur accelerator let go timing .. with ur Brian O Connors shifting ..

However, according to our Tamed Racing driver ... Quaza .. the CABLE will lag more compare to the drive by wire .. because the throttle body is heavy , when u press the pedal .. the cable will expand .. then only the throttle body response..

usually after wash use QD as a topper or a spot cleaner lo.
wax should always be a LSP, unless you're using cleaner waxes, which contains some mild polishing, something like an 'all in one' product

go with Sonax BSD; for tougher stains, use meguiar's ultimate quick detailer

why like kena add salt and pepper on the cable expand pulak

but people brian o connors shifting wo, sure dim punya

too hightech jor... wa wash car also not pro yet (now everyday raining wash car also so busy jor)

Not ur opinion the cable will lag compare to drive by wire meh ?

discuss je ma

i said according to you ma ... means ur personal opinion lor ..

I use BSD or HighSpeed wax after those normal paste wax, as i remember applying BSD doesn't able to clean up those dirt/stain, think need to get some better paste wax n shampoo jor since just finish yesterday, time to shopping