Hey guys,
I need some guide on recording guitar with my PC, I've done this a long time ago and I've forgotten a lot of it.. Hopefully some of you guys can help me out

I'm using a Roland Cube 20GX, a Zoom G1Xon and a Behringer: GUITAR LINK UCG102. For software I have Guitar Rig 5 and Reaper.

How do I get started? Is it possible to record without using Guitar Rig 5? I would prefer to just plug in through my multi effects and amp and record.

Hope to get some help!

i thought the roland cube 20GX has a line out to PC?

you can use audacity if you dont want guitar rig

so complicated.
i believe the G1x can also record direct as it has amp simulator...not as great but it still works.

If all you depend on is the sound card's line in, please install this driver for reducing the latency.

http://www.asio4all.com/

Yeah it does have a line out. But, if I use Audacity can I hear myself while recording? Last time I recorded with Audacity, I had to record then add the presets..

How do I record direct with the G1Xon?

I've already downloaded that driver, just not so sure of the procedure to get started..

umm output into input?
https://soundcloud.com/destinedtofester/zoo...ock-jamdemotest

This post has been edited by Everdying: Jul 3 2015, 01:46 PM

So do I record with Audacity or Reaper? How?

does it matter much? just use whatever ur comfortable with.
if all u want is record guitar, even windows sound recorder can do it.

This post has been edited by Everdying: Jul 3 2015, 04:13 PM

nah TS i made this jz for u

Thank you so much, but what if I want to use my Roland Cube 20GX direct in recorded without Guitar Rig? How could I do that?

Just do arm track & monitor track only. If u want to adjust your sound after record can always use equalizer and compression from the fx as well (or even from guitar rig too!)

How do I start out in Reaper? I dont know what to click.. How do I get started after plugging in my amp through the Behringer Guitar Link?

Sorry total newbie here!!

This post has been edited by ezpoir: Jul 11 2015, 01:31 PM

Bump.. Anyone can help me out? I have no clue on how to start out at all, with the programs

At this point, do you manage to connect your guitar to pc? any sound comeout from speaker? heheh

Nope, I can't get there yet... how?

This post has been edited by ezpoir: Jul 26 2015, 05:02 PM

1st u need to successfully install the hardware to your pc bro. Check back if any cd comes with those zoom or behringer product, or just google around on how to install it. I believe zoom has a built-in amp sim software, it's easier to install it and the behringer, did a few read up kinda tricky but never-the-less both product is a sound card btw...once your pc detected the device u can move forward to record it.

I already have the Behringer software in my PC, I have recorded with Guitar Rig 5 and Reaper before, just that I forgot everything.

But now I want to record with my Roland Cube amp and my Zoom G1Xon, how should I do it?

Do I need to install anything for the Zoom? What are the steps?

Sorry i have no experience with zoom multi-fx, u need to check at their forum/site

Anyway assuming your behringer guitar link is properly installed, u could do a basic setup/chain at beginning just to trace your problem.

Try this chain Guitar>Behringer>PC>Guitar Rig5>Reaper

and i'm guessing you didnt assign input/output setting correctly on Guitar Rig/Reaper

https://www.native-instruments.com/en/suppo...m-guitar-rig-5/

or u didnt set properly which sound card to do the playback/recording on your pc.

https://ddcampayo.wordpress.com/2013/05/12/...2-on-windows-7/