parking dulu

Check out VE...got mine from VE setia walk....

go after 12pm, should be open by then

Their fb page should have all the pic contact number for all their branch

try to check the square nut where 510 screw pin is locking on... on my kf4 the thread on the nut is abit damage, hardly able to hold the 510 screw properly and cause the ohm jumping...i manage to replace the square screw with a hexagon one...after that no more ohm jumping...the other problem i have with jumping ohm is when the juice control wasn't fully open... i suspect the spring wasn't making a good contact when the juice control wasn;t fully open.

if you need to properly wash your atty, i suggest using vodka. But most of the time water is good for me.

This post has been edited by Speeder6887: Jul 11 2015, 09:32 PM

some time i forgot to put the spring back after cleaning...it still works provided your juice control have to be at maximun open position. give it a try 1st.

mine kf4 so far has not had any juice drop on the spring area, just water condensation. try to fine tune your wicking material. make sure the wick is just touching and sitting above the juice hole.

if you manage to order the spring, let us know where to get it...might want to buy some to keep as spare.