Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
122 Pages « < 36 37 38 39 40 > » Bottom

Outline · [ Standard ] · Linear+

> LYN OFFICIAL VAPING THREAD V24, Ramadhan Al Mubarak from LYNVaperz

views
     
fauxfides
post Jun 30 2015, 06:57 PM

New Member
*
Junior Member
21 posts

Joined: Mar 2014


QUOTE(dadurtyz @ Jun 30 2015, 04:37 PM)
New to vap, using subox mini, somehow today i taste dry hits! Macam hangus, play around 12-13v Times to change new coil or cutton?
*
Sorry bro just a minor correction but you're definitely vaping at about 12 to 13 Watts (W). Not Volts (V) smile.gif
And anyway if you're getting constant dry hits now it's time to change the coils if its the stock coils or cotton if it's rebuildable
TheDeadlySins420
post Jun 30 2015, 07:02 PM

Getting Started
**
Junior Member
288 posts

Joined: Nov 2013
From: Autonomous State of Sarawak

where can i get starter kit include battery and liquid? my budget only RM320 blush.gif
prefer kange or cloupor

This post has been edited by TheDeadlySins420: Jun 30 2015, 07:02 PM
fauxfides
post Jun 30 2015, 07:07 PM

New Member
*
Junior Member
21 posts

Joined: Mar 2014


QUOTE(TheDeadlySins420 @ Jun 30 2015, 07:02 PM)
where can i get starter kit include battery and liquid? my budget only RM320 blush.gif
prefer kange or cloupor
*
All Vape Empire outlets (i think) are selling Subox Mini Kit (Black) with battery at RM260.00. Plus an extra RM40 for a bottle (or maybe cheaper if you nego)

This post has been edited by fauxfides: Jun 30 2015, 08:15 PM
fauxfides
post Jun 30 2015, 07:16 PM

New Member
*
Junior Member
21 posts

Joined: Mar 2014


QUOTE(nekkidgramma @ Jun 30 2015, 03:12 PM)
D2 uses Yihi chips which is a top player in the whole TC business and the D2 also have 30 extra wattage more. Why is this even a discussion?
*
Price point actually. The Eleaf iStick TC is cheaper but can only go up to 40W. The IPV D2 is more pricey but as you said, goes up to 70W. Both had their issues in the past. Many autofiring for the istick 50W and quite a few reported for the IPV4, paint peeling off on the IPV units, delayed production for the IPV4. Seeing how all the players are coming up with new models every month, these mid range mods do not really go through the proper QC. It's always a rush to push out their products ASAP and consumers in the end lose out. But being silly hobbyists, many tend to try out the newest products (guilty as charged).
nekkidgramma
post Jun 30 2015, 07:50 PM

New Member
*
Junior Member
42 posts

Joined: Jan 2015
QUOTE(kazexx @ Jun 30 2015, 06:54 PM)
kelantan ada kedai vape tak?

kalau tak kene restock liquid before balik raya biggrin.gif
*
There's one right in front of HUSM , Kelantan E-Cigarette and another near OUM Kelantan, asiavape. Hell it's growing like mushrooms nowadays
TheDeadlySins420
post Jun 30 2015, 08:09 PM

Getting Started
**
Junior Member
288 posts

Joined: Nov 2013
From: Autonomous State of Sarawak

ayam ordered kanger subox mini starter kit + battery for RM270 from Vape Empire icon_rolleyes.gif
wan.ridzuan
post Jun 30 2015, 08:17 PM

Getting Started
**
Junior Member
172 posts

Joined: Feb 2012
From: Georgopol



QUOTE(nekkidgramma @ Jun 30 2015, 07:50 PM)
There's one right in front of HUSM , Kelantan E-Cigarette and another near OUM Kelantan, asiavape. Hell it's growing like mushrooms nowadays
*
jom bukak kedai vape abang nekkid
SUSXnet
post Jun 30 2015, 08:18 PM

Regular
******
Senior Member
1,862 posts

Joined: May 2013
QUOTE(wan.ridzuan @ Jun 30 2015, 08:17 PM)
jom bukak kedai vape abang nekkid
*
Pacak dua ekor amoi sure laku
nekkidgramma
post Jun 30 2015, 08:31 PM

New Member
*
Junior Member
42 posts

Joined: Jan 2015
QUOTE(wan.ridzuan @ Jun 30 2015, 08:17 PM)
jom bukak kedai vape abang nekkid
*
Sure. you man the counter and I'll attract the customer with my smexy skirt... Now where did I put my razor laugh.gif
SX vapor
post Jun 30 2015, 09:57 PM

New Member
*
Junior Member
17 posts

Joined: Apr 2015
Today I tried wicking with tighter cotton and it seems to reduce spit juice. I understand for high VG we wick lesser. What are the other effects of tighter / looser wicking actually?

Another thing is been coiling my RDA with Kanthal, range from 0.70 to 1.70ohm. Normally I Vape them at 20W. I know I can Vape them at almost any watt but is there a rough guideline so as to bring out the flavor more? Been only playing with subohm since I started vaping so not sure about those above 1ohm suggested Wattage. Or it's the same I can Vape at any wattage?
Vail
post Jun 30 2015, 10:24 PM

LightHazeOfficial
*****
Senior Member
904 posts

Joined: Feb 2008
From: Your Bed.


QUOTE(SX vapor @ Jun 30 2015, 09:57 PM)
Today I tried wicking with tighter cotton and it seems to reduce spit juice. I understand for high VG we wick lesser. What are the other effects of tighter / looser wicking actually?

Another thing is been coiling my RDA with Kanthal, range from 0.70 to 1.70ohm. Normally I Vape them at 20W. I know I can Vape them at almost any watt but is there a rough guideline so as to bring out the flavor more? Been only playing with subohm since I started vaping so not sure about those above 1ohm suggested Wattage. Or it's the same I can Vape at any wattage?
*
put it this way. above 1 ohms build dont exceed 4.2v. or else cotton burnt very fast.

you will notice on higher ohm you're gonna be vapping at low wattage . 7-15w. flavor wise itdepending on the tank.

my setting, i dont build higher ohm on rda due to its airflow. It burns slowly - big airflow = no vape.

higher ohms works for tight draws. e.g KF4.

but im sure thats just me, other sure have different setting.
vioxmonsta
post Jun 30 2015, 10:53 PM

Getting Started
**
Junior Member
287 posts

Joined: Jun 2007
From: Subang Jaya


QUOTE(Vail @ Jun 30 2015, 10:24 PM)
put it this way. above 1 ohms build dont exceed 4.2v. or else cotton burnt very fast.

you will notice on higher ohm you're gonna be vapping at low wattage . 7-15w. flavor wise itdepending on the tank.

my setting, i dont build higher ohm on rda due to its airflow. It burns slowly - big airflow = no vape.

higher ohms works for tight draws. e.g KF4.

but im sure thats just me, other sure have different setting.
*
Good infos..sifuus
Muffins
post Jun 30 2015, 10:59 PM

Casual
***
Junior Member
360 posts

Joined: Jan 2005
From: One step ahead of you

Just got the billow v2. 28awg kanthal dual coil 0.6 ohms. Chucking clouds! So Hnngh, totally worth the trip to sg Wang to get it biggrin.gif
ZenXL
post Jun 30 2015, 11:00 PM

Oh shi-
*****
Senior Member
704 posts

Joined: Apr 2012
From: Chinatown



QUOTE(Muffins @ Jun 30 2015, 10:59 PM)
Just got the billow v2. 28awg kanthal dual coil 0.6 ohms. Chucking clouds! So Hnngh, totally worth the trip to sg Wang to get it biggrin.gif
*

how much was it?
ZenXL
post Jun 30 2015, 11:01 PM

Oh shi-
*****
Senior Member
704 posts

Joined: Apr 2012
From: Chinatown



I was wondering if anyone is interested in this tank? I've got one to let go, exactly like brand new cause I only used it like a couple of times.

user posted image
Nub!
post Jun 30 2015, 11:34 PM

Casual
***
Junior Member
478 posts

Joined: May 2007
Good day guys, need some info here.

So I build my first rba with the cotton I bought from ve. Basically just wick following the uk exit guide which is put in cotton in between. Fold the cotton both side upwards and put the coil head. Cut the excess cotton same length as the coil head and tuck them down to block the juice hole. Juice up all the cotton and screw in the top part.

So I'm before this I use occ and things going pretty well. But now the pop sound is louder than usual, tho no spitting and the flavour is stronger and I feel bit sick as in feel like vomit and get a slight dizzyness just now when you smoke your first stick.

Is it I not use to it or something that I did wrong? Do share if you guys experience like what I did.

It just feels so much more vapor coming out with a small draw and the sound is louder

Ps: is a subtank mini.

This post has been edited by Nub!: Jun 30 2015, 11:34 PM
ianlee
post Jul 1 2015, 12:03 AM

Getting Started
**
Junior Member
160 posts

Joined: Mar 2009


QUOTE(Nub! @ Jun 30 2015, 11:34 PM)
Good day guys, need some info here.

So I build my first rba with the cotton I bought from ve. Basically just wick following the uk exit guide which is put in cotton in between. Fold the cotton both side upwards and put the coil head. Cut the excess cotton same length as the coil head and tuck them down to block the juice hole. Juice up all the cotton and screw in the top part.

So I'm before this I use occ and things going pretty well. But now the pop sound is louder than usual, tho no spitting and the flavour is stronger and I feel bit sick as in feel like vomit and get a slight dizzyness just now when you smoke your first stick.

Is it I not use to it or something that I did wrong? Do share if you guys experience like what I did.

It just feels so much more vapor coming out with a small draw and the sound is louder

Ps: is a subtank mini.
*
More vapor = more nicotine

It happens to me to when I vape a lot. Try drinking more water and stop vaping when you feel dizzy

Muffins
post Jul 1 2015, 12:06 AM

Casual
***
Junior Member
360 posts

Joined: Jan 2005
From: One step ahead of you

QUOTE(ZenXL @ Jun 30 2015, 11:00 PM)
how much was it?
*
Rm120 at hypervape
Topet
post Jul 1 2015, 12:14 AM

schadenfreude
*****
Senior Member
994 posts

Joined: Jun 2009
From: Sabah


Zephyrus ok ka?mintak pandangan
Nub!
post Jul 1 2015, 12:27 AM

Casual
***
Junior Member
478 posts

Joined: May 2007
QUOTE(ianlee @ Jul 1 2015, 12:03 AM)
More vapor = more nicotine

It happens to me to when I vape a lot. Try drinking more water and stop vaping when you feel dizzy
*
Noted.

122 Pages « < 36 37 38 39 40 > » 
Bump Topic Topic ClosedOptions New Topic
 

Change to:
| Lo-Fi Version
0.0303sec    0.63    6 queries    GZIP Disabled
Time is now: 2nd December 2025 - 10:17 PM