take off everything apart and wash it. Dry it.

then assemble the glass back into the tank steel. Make sure its all the way in properly. If you notice that the 2 oring somehow stretched to the glass(where its not suppose to be), replace the o rings with the spares inside the subtank box.

Yeah can.. no problem.. depends on a person some a bit lokek on the liquid so they change the thing and new flavor.. you will taste the old on about half a tank then new flavor kicks in..

Maybe it's enjoying itself haha... Which part does it get wet?

The glass has juice because of the seal. Try tear the tank (Vail not your "tank") down and rinse and let it dry refit it back. As for juice at AFC, check your coil. I believe it's mentioned few pages back. Check the o ring is in place and tightened down properly or not. Actually think of it in simple way, there is only a few parts and the part that comes in contact with the juice is the coil head. It's either the cotton is getting lesser due to burnt cotton or the o ring not in place.

There was once a full tank of juice leak out of mine just because I forgot to put the round top piece of the RBA back after I rinse, dry, recoil and rewick. That was really frustrating!

Maybe u should just bring ur spitteng back to the place where u bought it from and change . Urs is really

yeah u should since they provide 1month warranty for subox mini by mostly all retailer.
Bought mine last week, and it function really well till now.

Hot cannot? Try cold. Put it in the freezer then try again

ketuk lightly the rba on a hard surface. or drop it on the floor just to vibrate the threads

always work for me

50/50 would do. higher pg grade can cause lots of leaking depending on what tank your using.

50/50. or higher vg or else ur rba will flood and a lot of spitting

Higher VG = more vapor
higher PG = can contains more flavor

Dafuq bro? U high ?