[SIZE=14][COLOR=red]haha..here come my 1st modding...my old casing is now need some renovation..huhu.
actually,i am new in modding..so,i used all my creativity to do all this..i've done it by my ownself..

anyway,the top panel and the side panel only finished for this time..any updates will be soon after my exam..huhu..here are some eyecandy from me.. use only TUKUL & PAHAT...no jigsaw or drill!!

enjoy! and give me your comment!

will update soon...!!!




firstly,the top panel fan.. i only used the useless sony speaker grill and make a hole in it..as the pic below...use only the pahat and tukul..huhu.. then,i've spray it to make it look new and refreshing..after made a hole,tidy it up by using the wire insulator..huhu..save budget..
Then,setup the fan grill and screw it up..






After that,place it on the top panel ..i've made a hole to fix in the fan..also a small wndow on it...






here come my masterpiece..the side panel hood..
~~~my father's old car hood..
just make a hole on it to fix the fan..by the way,it is for the right side panel..which is close to the mobo.. the pic is without any fan..coz dont have much time..need to study..exam soon..
will update soon with more pic!!





Final touch....check out on page 5 for more!!!!!!!!!!!





This post has been edited by ryudox: Jun 25 2007, 11:19 PM

Nice ... keep up ... can't wait to see the outcome ////

TQ..the project is hold on..preparing for final exam..huhu..

is that roof scoop for car??? the one with double fans?? huuh nice nice.. dam7 nice

nop..the hood..huhu.. ever thinking to add hood to your PC? try it..huhu..

whoo hood scoop???
ehehhe ... sure cost a bomb.. u want to add where?? side panel???

yup..at the side panel..the right panel..coz the left one i want to add acrilyc..huhu.. by the way,it does not give superb airflow which the car does..it is not moving rite? huhuhuhu.. just a decoration..but i will add 2 fans to the hood to cool down the mobo..

the wire insulator does wonders!! where can i get it?

Wow... really DIY from scrap metal.. COOL~
like the car hood thing...

wire insulator? haha..just seek a wire,then cut it out..take the rubber and throw out the wire..huhu..

use pahat & tukul only..and also a nail to make a screw hole..dont have any jigsaw and drill..

however.. nice work too man.. keep it up

nice hood u got there by da way keep up the good work

oo very ghetto and effective mod. Cheers for u

I love u're mod on the top panel...

It's ghetto , but minus the point on the handle...

If don't have handle maybe will look better...

the handle is use to carry the case any where..mobile technology..haha

yo, brother...thumbs up..

where you do all this stuff?
takkan at your kolej right?
by the way, the fan, sendiri bikin punya kah??

nghj...long time no see..nop..when the hari raya holidays..haha..but now i have returned to my college..prepare for exam..soon will continue the work..
see the fan grills?? IT IS YOURS!!! haha..
the fan is sprayed with florocent...

haha...patutlah rasa macam pernah nampak je...

orang balik rumah beraya, abang ryudox pulak...

tau xpe..u should feel glad for that..haha..raya kejap je..boring2 buat la modding..haha

just wondering, how come the the top pane fan is sucking air?? 2nd if you're making a hood y didn't you consider on placing the fan inside of the hood instead drilling on that precious hood?

the top panel fan is blowing air into the case..2nd,the hood will added with two 8cm fan later..i've got no time now..will add soon..update later..

the top panel fan should be blowing air "OUT" of the case....hot air rises ma....

i will add more fan to the PSU and back panel to suck those hot air..dont worry..this work is not finished yet..huhu

ph34r the power of speaker grills

For those wanting metal mesh, here's a replacement. Who will start to mod it with those big grills in front of car bumpers?

Nonetheless, looks good. Keep it up.

nice mod there dude! keep it up!

thanks..cant wait to continue the work..huhu..

yeah...
if top panel blow out
bottom blow in, should be better.. but the prob is dust

hehe
dude,, how much the hood scoop??? huuhuhhh
tak sayang ke?? hahhahhaa
u just gave me idea, can i copy in the future ??hehe

yeah..i also noticed about that..but,if i replace the fan with blow out wind,the fan will look not nice coz the fan's motor will head up..huhu..by the way,i will add fans to the back panel and also the PSU to suck those hot air and dust...

Yes..tak sayang coz the hood is look ugly before..look shiny after i sandpaper on it and sprayed the acrilyc paint..huhu.. easy to find this hood..i got this from my uncle's workshop..

oo..steal my idea meh..

hot can travel.. but dust.. sure lekat kat mobo tray.. huhuh..
eheh.. just grab Uglyvamp dust filter uv somemore
hhhahaaa

eheh.. kalo ade roof scopp lebih.. pm, pm me.. hhahahaa

dust also can travel..need to vacuum it later..huhu.. can do some casing service everyweek to clean those dust..huhu..

ok..will pm u if i got any hood.. spoiler,bumper,side skirt also want?huhu..

P/S: sorry for the triple posting..internet here like a bulls***t..huhu.

New update.. 4/11/06

bought a car mud guard air flow and fluo yellow..

air flow=Rm15.90 -----> bought at mydin
dove (ayam brand) fluo spray=Rm5.90 -----> bought at giant

any ideas on where to place the air flow? i decided to place it at the side panel...





will continue the work next week..need to study now..

This post has been edited by ryudox: Nov 4 2006, 11:50 PM

haha.. creative one aa.. meh update laa new pics

pic will update soon..coz i am buzy now for my exam..huhu..thankx bro..got ideas from my modding?hehe..

yeah.. definitely! i`ll mod my 'cap ayam' casing soon.. but for p3 only ah. hehe.. final xm? ipta baru nak final ke? mmu will start new season

nice nice !!! casing look like sports car de.....

This post has been edited by AllnGap: Nov 5 2006, 11:30 AM

huhuh GREAT IDEA

put at side panell sure looks great..
try do only not whole acrylic..
jus a lil bit.. and put the air flow next to ur GC... then do intake fan
something like sidewinder b4 mod by brother ianho.. but sidewinder one, at bottom rite.... ..
dont think that air flow suite if put on acrylic..

lol.. become some sports car comp... nice.

yeah..ipta just to start final exam soon..after that,will get holidays soon..can continue modding work..hehe..
not really,i think it can be placed on the acrilyc..huhu..

racing casing will come out soon.. vrooooommmm..
by the way,can suggest me the suitable name for my casing? my mind always say 'evolution'..hihi.

IMHO
yes,, but huhuh dont think the car image will appeal if u put on arcylic
heheh but it;s urs.. hehhehe

yeah..but i have my way to make it..maybe it will be placed on the acliryc,but with some other way..hehe..dont worry..soon will be updated..

what about evOCom. wahahaha... like that name. has several meanings on it

yeah.. pro evolution com..kihkih..

pro evolution soccer version komputer

This post has been edited by serez: Nov 5 2006, 11:01 PM

proton evo dengo processor yg sangat laju...



cant wait bro... u r having u final exam??? same here..
haha briefly in word.. describe how are u going to match the flow with acr??

i will spray the acrylic on the edges to make it as a mask..so,i will put the air flow on it..simple rite..hehe.. yeah,a week exam..need to study ma..16/11 will come back home..and the masterpiece will begin..kihkih...

Finally,i will reveal the name of my becoming modded rig..kihkih.. the modding didn't finished yet,but i've already give the name..

Ladies n gentlemen,i will introduce............

loh.. thought u were using evOCom, or pro evolution or something else.
by the way.. proud with ur casing`s new name

hehe..evocom sounds funny..pro evolution sounds football game freak..huhu..
actually,the name is evolution.. just to mention my nick on it..kihkih..

i will modify this logo to fit on the acrylic... ..steal the design from nfs underground..

This post has been edited by ryudox: Nov 7 2006, 02:54 AM

evocom sound funny ey? hehhe.. nvm. just giving u ideas on ur rig`s name. u want to know my rig`s name? i call it Latipah Umar

hehe..here comes the prototype image..but actually not the exact one..maybe i'll have other ideas on designing the panel..but the rough sketch is probably like this..so u will get the rough view for my modding..

2 design for now..which one do you like?





I will use 100% acrylic for the side panel..the black color will be the mask..i'll spray it black at the back of the acrylic..before it,i have to cut the design using the masking tape and cutter.. got it? or u have any ideas to add? u r welcomed..

why the time is running so so longgg..need to sutdy now..exam tomorrow whoaa...

Personally, i like the 1st design...

Why?
Because the fire in the 2nd design is too large...

Maybe you should make the fire effect more smaller and more sharp...

mmm..the 1st is look plane..by the way,i'll consider your idea..thanx dude..

nice design... aku sokong yang pertama...

wah..sume nak yg 1st ke..huhu.. come and vote!

1st design quite normal, so prefer the 2nd one.
but maybe the 2nd one can improve like what shawty said.

i like the 1st one. why? cause the grills are too big. they out attract the flame designs. besides. it feels more spacious on the 1st design. comfortable with it,

mmm..yeah..1st design look smart..the 2nd look messy rite..huhu..

yeah... sokong 1st design oso! simple but furious! better don`t put too much design on it. the 1st design is just ok

It seems like everyone agrees in what i said...
Go for design one...

But there's plenty room of improvement for design 2...

Try to make the Fire effect more smaller and sharper, that way, i think everyone will fall in love with it...

alternatively, you can mould the windows to have a bulging out effects. that is what most extreme car modders will do.

yeah..i also think the 1st should be better..not too crowded..look simple..fast n furious..

actually,my idea came from this modded side panel..i'll do the exact method on the acrylic..

bapak cun gile design ko..
hahhaha
cant wait for the panel to be finished... hahhaa
1st one look nice simple
KISS keep it simple stupid.. << btul ke nih??
hehehhee bro, if u can make it reality..

This post has been edited by fantagero: Nov 10 2006, 11:19 PM

haha..that's not his design la..i think he took it from bit-tech.com....a lot of modded case u can find from there...

anyway, keep up ur good works....

haiya..that's not mine la..just to show u the method that i will use in my modding..huhu..will spray black on the acrylic..like the pic above..huhu..
4 days remaining to go home..yoohooo!!

wuteva u took the design.. it still looks cool if u can realitised it
ehehe..

yeah..learning by doings..huhu.. will update soon..very soon..hehe.. last paper on monday..

oyt when ur exam will finish?? continue with your work la. cannot wait anymore

yeah..finish on this monday..kihkih..

Jgn buat kitorang tunggu lelama bang...

Done modding, put the results here will ya?

yela..tgh exam ni..last paper..kena study dulu.. will update later asap...hehe

harinih last paper kn.. yeay yeay..... sambung kje cepat
utec kat mne???

yes..finally,today i'll be coming home..yuuhuuu... need to continue my posponed modding work..hihi.. utec is atually KUKTEM,located in kuantan..i know u never heard it before coz it is a new ipta..huhu..

I'm goooiiiinnnggggg hhooommmeee...!!

Good luck wit ya mod,cant wait to see some updates

Bro,

KUKTEM ? I have a friend working there...

by the way,

Dont forget ya... i'll sms u later...

Nice MOD on the RIG...

Where did u get the rubber lining from ?

Nice...

ur avatar is ur own picture ? haha , prefer design 1 btw

when the result are going out ?

hei ruudox keep up the good work man.... UTEC rules forever...... r u fkm student????

he's from civil, i think...

im from fkksa

i am from FKASA....go go civil...!! hehe.. finally my project will be finished soon...about 85%..

kamon la bebeh keep working. tak sabar nak tengok final touch ni. hehe..

ok..here comes....................

Hi guys!! sorry coz long time disappeared..huhu..
actually,i do my modding in this entire week..here some updates for u all after a
long-waited period..hihi..







This is the left side panel as mentioned from the design i've made before.. i used the
acrylic and cut the design on the mask layer..after that,just spray the acrilyc to get the shape.. just add A4 paper to glow the logo..huhu..


Then,the air flow is sprayed with silver and the grill with floro yellow..after that,attach it on the acrilyc.. Aaalllaaammmaakkk!!! I've done a big mistake!!! the acrylic should be vertical according
to the casing,but i've made it horizantally...haiyya.. but i have the solution..i used the metal side panel and cut it out to fix the acrilyc... i hate doing mistakes!!!!!!!!
So,finally the it fix together..thank god..huhu..

This is the custom front panel..also using the acrilyc..the same way with the side panel..just add extra decoration like the aerial and also grills..hahaha..cheapo rite?



the right side panel not finised yet..but the custom hood is done..need to cut the hole on the metal panel and spray it with black later on..






So,this is for today's update..will coming soon with more and more..just wait..hihi..
i am a kuktem student...fkasa student..hehe..

sorry guys coz make u all waited...need to finish the work as soon as possible..

hehe..post your comment beb..actually the project is not finish yet..will be update soon...i want to play nfs carbon..see ya!!! haha

kerja yang bagus bro .. kemas dan menarik

fullemak!! i respect u lah bro
nice work out there.. boleh mod casing aku skali kot? mm hahaha...
always up-to-date with ur work lah ryu. after grad soon maybe i have some more time to mod my cap ayam case

hope u`ll post ur final touch in here. add some more uv stuffs. it`ll looks great

1st of all i like ur idea.
2nd the air flow the side panel,the air flow cool...i thought it was like alienware....
imho both 1st & 2nd r nice....the 2nd looks firery...have to colour it fire then
3rd the ryudox design was ..

keep up!

nice........really creative modding!!!

D@MM nice.....the most creative case mod i ever seen......it should be a hard work i think...

i also taught it was a alienware side panel

btw, i like ur design!

keep up ur good work

nice work....

i like your mod....

creative and innovative....