Good point there. Too bad there's still many consumers opt for budget instead of quality. Everyone like cheap stuff, so do I but I think value for money is more important. Otherwise, you are just wasting money.

M'sia living style really keep going down onwards..

Meant backward n no more wawasan already.
Got food to eat is consider a happiness

not all people are rich like you. however rich people like warren buffett is cheapo liao. only eat mcd and cherry coke every day, live same house more than 30 yrs. just a cheap car too.

Ya loh my target go with MEC or Elba Aircons he he
Even fujiaire or Pensonic

This post has been edited by kimsim: Aug 14 2015, 01:37 PM

Today just realise my previous non-inverter copper pipe thickness for the most bigger size to compare as recent installed with G23 gauge = 0.61mm thickness

For the most bigger was 12mm diameter but the thickness very thin for less than 0.51mm for gauge 25 only.

So you guys/gals would prefer upgrade from non-inverter gas R22 to R410A even non-inverter.

They will be leaking gas not longer time or break off sometime later at the bending corner.

Gas R22 vs R410A = gas pressure double up from R22.

My photos just taken now.






So now you guys/gals have a guide to check your condo/consealed wall copper pipe should not look like the bigger copper that thin and at least slightly thicken than the bigger size.

So you have chance to install with R410a or inverter unit anytime.

FYI at 36deg C. R410a is around 330psi and R22 is around 200psi.

Just found the shop that sell MHI inverter aircond in Tun Aminah, not only 1 shop, but few, and surprisingly the price is cheaper than MEQ that i bought. 1HP inverter RM1400, 2HP inverter 2.4k.

This post has been edited by coolkwc: Aug 16 2015, 06:24 PM

cause MHI more into budget user.

Is hisense air cond durable ?

Consider in short term is still consider ok.

Such as usage when hot weather.

If wanna more durable just go with MHI, Pana basic std or Daikin basic will do

Price almost double.

Sure cause you pay for half mah.

If you consider for 5 yrs should be ok

MHI for budget user? Are you sure? I thought MHI > MEQ. Reputation wise MHI > MEQ as well.

This post has been edited by coolkwc: Aug 16 2015, 09:18 PM

Even SG also, MHI quality just like china made wow.

Mind to give the link where you read that? I googling and seems like you are the only one who claim MHI < ME.

Even SG also, MHI quality just like china made wow.
Can see the both of different division

ME interior design





MHI inverter




This post has been edited by kimsim: Aug 16 2015, 09:47 PM

Don compare to GE model la aduhai. Compare with my GJ model enuf adi, lower annual consumption, higher EER, additional left right air swing, ioniser, and cheaper than my GJ, so what you want somemore??

This post has been edited by coolkwc: Aug 16 2015, 09:52 PM

just a compressor different, but your GJ overall also the same as GE models.

left and right air swing for MHI only, unless is my GE24VA then comes with left/right swing only.

This model still available in m'sia but already change into Mr. Slim

What do you mean by "pay for half" ?

Seems like u compare from Rm500 vs Rm1000.

Durable & last also cut-short for 5 yrs to be compare as common brands.

Otherwise it is good deal