Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

> LYN OFFICIAL VAPING THREAD V23 -, Kipidap Edition

views
     
tankhunter
post Jun 9 2015, 03:56 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(saru04 @ Jun 9 2015, 03:50 PM)
Oh serious?

How bout the wicking part?

Do you put the cotton flat out like a fan (like Subtank mini)

or do you push the tip of the cotton into the juice hole?
*
when i wick i leave it long and pull through the first metal ring, then cut to the top of that ring. Once you push it back in start juicing the wick and then before assembling grab your tweezers and push the wick a bit back so you can see the juice hole on each side. So far no problems for me.
tankhunter
post Jun 9 2015, 04:09 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(saru04 @ Jun 9 2015, 03:58 PM)
So to say just make sure the juice channel is not blocked and use the cotton open it up like a fan like the Kanger Subtank
*
yah, actually the design almost exactly the same
tankhunter
post Jun 9 2015, 04:21 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(saru04 @ Jun 9 2015, 04:17 PM)
Alright if coiling and wicking the Lemo 2 is the same as the Subtank Mini then I wont have problems with it.
*
https://www.youtube.com/watch?v=fuW9s-tjQjY

Coil size up to you but here is a tutrial by Rip trippers
tankhunter
post Jun 9 2015, 04:29 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(Darth Vaper @ Jun 9 2015, 04:21 PM)
It is not my young padawan. If you buy it, there's a ready made coil in the RTA. The coil is reversed to fit into the post hole BELOW the main deck
user posted image
*
But you can trap it under the screws if you are using a higher gauge wire, 26 or 28 can fit

Looks like someone was hitting the top of the chimney lol

This post has been edited by tankhunter: Jun 9 2015, 04:30 PM
tankhunter
post Jun 11 2015, 12:24 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(johnny12262711 @ Jun 11 2015, 11:54 AM)
hi guys,

wanted to get a rta tank for myself..
which 1 do u guys recommend? subtank mini or lemo2?
or is there other rta?

thx =D
*
In my view i prefer the Lemo2 over the subtank, less air flow but more flavour. My all time favorite at the moment is the cuthulhu, no dry hits full of flavour and is built for dual coil setup smile.gif
tankhunter
post Jun 11 2015, 02:27 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


Wooo Vapemail came today, i now have a tugboat mech mod with the tugboat RDA

Couple of drip tips, a jade one which looks swag on the Cthulhu lol

This post has been edited by tankhunter: Jun 11 2015, 02:30 PM
tankhunter
post Jun 11 2015, 02:45 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(johnny12262711 @ Jun 11 2015, 02:34 PM)
thx for the advice, how can i forget bout cuthulhu  doh.gif

wonder where can i get 1, missed the group buy last time  cry.gif
*
I know hard to find here, i should have bought three the flip, flip, flip lol

erm... i guess if you ask faux nicely he might be able to help.

If not the lemo2 is a really close runner, i constantly switch between the two
tankhunter
post Jun 11 2015, 04:56 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(maudermunty @ Jun 11 2015, 03:56 PM)
Bro, when u bought cthulhu how much was it?
*
I bought it on the group buy for RM110.00
tankhunter
post Jun 11 2015, 05:03 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(st4Lk3rz @ Jun 11 2015, 04:47 PM)
hi guys. i have a problem. my top screw of my subtank mini RBA is stuck to my bellcap chimney. when i unscrew my rba to refill juice, the top screw detaches. been trying to take it out but to no avail.

SOS
*
Grab a paper clip straighten it bend in half, then bend the 5mm of the ends 90 degrees, insert make sure they hook the top and pull lightly
tankhunter
post Jun 11 2015, 05:27 PM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(maudermunty @ Jun 11 2015, 05:10 PM)
Itu clone (fake) one, confirmed by cthulhumod guys
tankhunter
post Jun 15 2015, 10:12 AM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


morning all
tankhunter
post Jun 15 2015, 10:54 AM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(zero_hour @ Jun 15 2015, 10:30 AM)
hi, since sub box group buy cancel i just buy this esquare mod,
the temp control do make my vape better ,very happy with it  flex.gif

thinking wanna get box shape dripper so it match my esquare mod, any suggestion ?
notworthy.gif

[attachmentid=4486706]
*
Huh the subox group buy is cancelled????
tankhunter
post Jun 15 2015, 11:19 AM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(zero_hour @ Jun 15 2015, 11:12 AM)
ya, from one of the seller here,got problem with supplier,  other one group buy  is still ok,
*
Yah, Faux confirmed that group buy still going on smile.gif
tankhunter
post Jun 17 2015, 10:16 AM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(Xonius @ Jun 17 2015, 09:12 AM)
ya serious? I just bought 2 bottles myself, and for some reason it tasted better than all previous batches, its my ADV for close to 2 years now (ever since i started vaping), on my 15th bottle now.

Mother's Milk has a very steep learning curve on how to bring about the best of it, took me countless tries and i've succeeded after a couple of months experimenting, there is literally no other juice like it in the market. The throat hit is good though it might be slightly high for those who are too used to local juices, but to me it is just nice, and the flavor...i just can't describe its awesomeness.

Unicorn Milk is also in my daily rotation, both are good but MM takes the cake with a more powerful in-your-face flavour. UM is something i vape to tone down.

So far the best strawberry cream/custard flavours i've tasted are:

1. Suicide Bunny - Mother's Milk
2. Cuttwood - Unicorn Milk
3. Nicoticket - Strawnilla

NO local made liquids have come anywhere close to the above 3.
*
Yeah i agree, Mothers Milk is the tits when it comes to flavour. I purposely bought 0mg nic because i know what american nicotine does lol.
tankhunter
post Jun 17 2015, 10:20 AM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(maudermunty @ Jun 17 2015, 10:20 AM)
I think you meant TLTS....  tongue.gif
*
TLTS??
tankhunter
post Jun 17 2015, 11:35 AM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(maudermunty @ Jun 17 2015, 10:24 AM)
Nothing bro. Abaikan.  biggrin.gif
*
QUOTE(treblecase @ Jun 17 2015, 10:26 AM)
He dun geddit  tongue.gif

The key to this tered is to always read previous pages..at least 5 pages back from any current page  biggrin.gif
*
Oh lol now i get it laugh.gif

This post has been edited by tankhunter: Jun 17 2015, 11:38 AM
tankhunter
post Jun 22 2015, 10:29 AM

New Member
*
Junior Member
12 posts

Joined: Feb 2013
From: Kota Kinabalu, Sabah


QUOTE(ianlee @ Jun 22 2015, 09:55 AM)
Anyone wanna buy mother's milk? One bottle unopened. Another one only used 5ml
*
What are the nic levels?

Bump Topic Topic ClosedOptions New Topic
 

Change to:
| Lo-Fi Version
0.0431sec    0.20    7 queries    GZIP Disabled
Time is now: 1st December 2025 - 05:40 AM