IPV4 100W

The wait is over! All orders will be shipped out tomorrow and as for the collection we will be communicating with you

I would go for Lemo 2 , better than the Subtank Mini in my opinion . Vapor production and flavor wise .

You want one with RBA only or both OCC & RBA?

Subtank is the easiest to rebuild IMO. Lemo 2 is easy too but you gotta do the wicking right otherwise it'll leak. UD Goblin is not really recommended as the build deck is quite small & works best with dual coils. UD Zephyrus the same although it has OCC too. Kayfun V4 is easy to build but you might be intimidated by the many parts. What else.....

Lemo 2 is a good choice.
Other than the Lemo 2, I usually use my VS with the AGAT5 or the KF4 on it.

When I first got it and noob, my Lemo 2 leaking.
But after studying and reading about it, no more leaking liao.

Just need to refill the tank with the tank lying on a flat surface can liao.

when i wick i leave it long and pull through the first metal ring, then cut to the top of that ring. Once you push it back in start juicing the wick and then before assembling grab your tweezers and push the wick a bit back so you can see the juice hole on each side. So far no problems for me.

yah, actually the design almost exactly the same

But you can trap it under the screws if you are using a higher gauge wire, 26 or 28 can fit

Looks like someone was hitting the top of the chimney lol

You're ok with a regulated mod with short protection. Do readjust the coil though

Yeah, the display would show "shorted". It will not fire.

Hypervape @ Sgwang.

saw online, u can't get vtc5 anymore, some selling rewrap from samsung battery ....