Let me know if you're interested in getting the VS. I've got 1 unit to let go.

Used 1 month only. Lastest firmware with atty lock function. Condition still awesome. And oh yeah, comes with 2 skins.

I'm letting go mine. 1 month old rDNA 40 from VapeKulture.
New firmware with atty lock. Comes with 2 sharkskin. PM me if interested.

Yeah. It's the same as resistance locking on the M class.
It comes in the newer version of the VS. The older rDNA 40 doesn't have this.

PM me your number I'll send you photos of the VS.

Clone or ori?

Okay. I'm taking it as you bought the Tobaco version for your clone.
I own 1 unit of the Tobaco clone too and had the same problem.

The source of the leak is part number 16 and I'm almost very sure about this.



Get this change and it's good to go.

https://www.fasttech.com/p/2095701

Get this pack and replace the O ring. After that no problem liao.

Bought mine from VapeKulture. But that day went to HyperVape in Sungei Wang also they have it.

The box is the biggest giveaway. EHpro one the box write big big EHpro and nothing else. Tobaco one they don't use the Kayfun style box. They put their own box and the polycarb is matt one instead of clear like the original. Infinite one need experience to tell.


Good luck. They sell the UD coil rolls there. It's RM20 for 10m I think.


If you cannot wait, I can sell you mine first. I bought 3 sets for I also dunno why I bought 3 sets.

If this is the case, I think we narrow down to 2 clone makers. Either Infinite or Robotech.
For the price that you pay, it should be a Robotech.

Most of the clones are 1:1 in terms of size but the etching and engravings confirm cannot 1:1.

End of the day, you buy the technology of the original tank for the fraction of the price of the original. And that's all that matters.

Lemo 2 is a good choice.
Other than the Lemo 2, I usually use my VS with the AGAT5 or the KF4 on it.

Muji Pavilion stocked up their organic cottons already. Last week bought 2 big packets.

When I first got it and noob, my Lemo 2 leaking.
But after studying and reading about it, no more leaking liao.

Just need to refill the tank with the tank lying on a flat surface can liao.

Usually I'll wick it like the Subtank but I'll cut the cotton to a point I can put some into the juice channel.

Like this




Aiya. Like that need someone to help you buy already. But once you get it, I think few months no need buy cotton.
I'll see if I got go Pavilion again or not. If got I'll help you buy but you cover shipping cost. I'll PM you when I go there.

It's the same as the juice will eventually be getting its juice from the juice channel.

As for your questions, if you're using kanthal 26g to get 0.6ohm, you'll need 6 windings on a 2.5mm inner diameter.
For 7 windings for 0.7ohms on the same inner diameter.
Psst: There's alot of coil calculator on Appstore. Cheat sheet.

Finally coffee vape kaki! Thought I was the only one.
But after 2 bottles of Americano, kena vape tongue. Now taking a break from Americano and Coffee & Cream while doing fruity/minty flavor until my tastebuds come back.