Guys,

My Cthulhu RTA just now was set at 0.5ohm but after I push the coil in cos scared it will touch the wall, the reading dropped to 0.3ohm.

Can the tank / mod take such ohm?

I'm using VS rDNA 40 and iPV Mini 2.

Hehe...true dat. Collecting from him later 

I saw YouTube RipTripper or Twisted420 did advise to remove the screen and use alcohol to wipe the inner plastic of the screen to fix that problem of mirror screen.

Thanks for coming by
Share your successful and failed builds so that we know what to do
Thank you as well
As indicated above! Just quickly threw in a quick build and realized that it isn't done really well, TC is should be working but I've got my first burnt hit. Definitely something wrong with the build.
Yup! All new batches do not have the film tint over it. Has been removed even with the new batches

Dayum!    I think Ill finish my kanthanls first then ill try to get a nickel.

By the way, I got IPV4 last night and tried the factory stock coil of subtank mini which is estimated is 0.5 ohms. It was legit on my first fire, the indicator shows 0.5 ohms but after I pressed (+) and (-) to try locking on IPV 4 ( and its clear that no locking ) it shows "ohm resistance" then now it suddenly 0.61 ohms 

Does anyone knows what I did? did i do wrong? 

And another thing.. Bought charger on V.Empire @ Kepong  Xtar VC2  worth Rm 90 anyone used this before?

I just don't understand why these ppl keep repeating over and over again that vaping is poisonous while they don't even think that smoking is even more deadly. There was once whom I just met over dinner and saw me vaping while they smoking. Waw u smoke poison. I ask him who said vaping is poisonous, he said a lot of ppl said, then I ask in detail who he think n reply doctor said. Which doctor, Singapore doctor, which Singapore doctor, er neh Lee Kuan Yew house doctor. Even tell me he is very close to that particular doc. End up I ask him smoking is not poison? And lazy to rebut him anymore. End up I just walk away and Vape outside. Few days later all the other friends at the table asking me to buy mods n tanks for them. Lol.

Subtank is the easiest to rebuild IMO. Lemo 2 is easy too but you gotta do the wicking right otherwise it'll leak. UD Goblin is not really recommended as the build deck is quite small & works best with dual coils. UD Zephyrus the same although it has OCC too. Kayfun V4 is easy to build but you might be intimidated by the many parts. What else.....

morning all

wanna ask, if my Kayfun v4, the valve part slipped already, where the valve cannot be lift up for rejuice, how to fix this?

spring still there, i tried to readjust a lot times, but somehow still not working

i work in dataran prima, not too far not too near, can make an effort 

Forgot my PV at hotel room and I thought I left it with tuk tuk. swt..😳😳

10 wraps = 0.1ohm
ni200 26awg 

hi guys,just receive vape mail today from ft,so i ordered a mech mod and a rda.
im a newbie for mech setup and was so excited until i find the problem that i can't completely screw the rda onto this mech mod,pic below

so is this faulty or what ?

IPV4 or SX mini M class or Snow wolf 200W

i notice a lot of ipv4 user sell back their mod? any issues with the mod?

how many set do you have? home set? outdoor set? office set?

Hey Guys

Am new to vaping, still don't have any vape/ecigg or whatever it call.

Mind to share any good one for starter?

Thanks

change the o ring on the juice control deck den no issue...  see u tube!  not red tube~

Anyone tried BellsBrew BreakfastCrunch?? Any comment??