QUOTE(cyslock @ Jun 8 2015, 12:06 AM)
I see.. Thank you for enlightening me. Does these apply to nickels too?
It does, but since nickel is mostly used with TC, the watt/volt is self regulated.
LYN OFFICIAL VAPING THREAD V23 -, Kipidap Edition
|
|
 Jun 8 2015, 12:24 AM
Show posts by this member only | IPv6 | Post
#381
|
 
Junior Member
65 posts Joined: Nov 2009   
|
|
Quote|
|
Jun 8 2015, 12:24 AM
|
Senior Member
904 posts Joined: Feb 2008 From: Your Bed.
|
QUOTE(cyslock @ Jun 8 2015, 12:20 AM) Dayum! Ipv4 don't have lock mode. Pressing both + and - is only for nickel mode where the chip needs manually to detect resistance. On kanthal mode, shouldn't be any problem. Pressing fire will auto detect ur noob wire  I think Ill finish my kanthanls first then ill try to get a nickel. By the way, I got IPV4 last night and tried the factory stock coil of subtank mini which is estimated is 0.5 ohms. It was legit on my first fire, the indicator shows 0.5 ohms but after I pressed (+) and (-) to try locking on IPV 4 ( and its clear that no locking ) it shows "ohm resistance" then now it suddenly 0.61 ohms  Does anyone knows what I did? did i do wrong?  And another thing.. Bought charger on V.Empire @ Kepong Xtar VC2 worth Rm 90 anyone used this before?   |
|
|
Jun 8 2015, 12:28 AM
Show posts by this member only | IPv6 | Post
#383
|
Junior Member
24 posts Joined: Feb 2013
|
QUOTE(Vail @ Jun 8 2015, 12:24 AM) Ipv4 don't have lock mode. Pressing both + and - is only for nickel mode where the chip needs manually to detect resistance. On kanthal mode, shouldn't be any problem. Pressing fire will auto detect ur noob wire So mean to say it shouldn't be a problem right? I panic like hell suddenly my ohms 0.61 already  I just checked online the charger i bought VC2 quite promising  |
|
|
Jun 8 2015, 12:29 AM
|
|
Newbie
0 posts Joined: Mar 2015
|
QUOTE(cyslock @ Jun 8 2015, 12:20 AM) Dayum! the (+) and (-) is for nickel to set it's resistance so the resistance won't jump up and down when you go into temperature mode I think Ill finish my kanthanls first then ill try to get a nickel. By the way, I got IPV4 last night and tried the factory stock coil of subtank mini which is estimated is 0.5 ohms. It was legit on my first fire, the indicator shows 0.5 ohms but after I pressed (+) and (-) to try locking on IPV 4 ( and its clear that no locking ) it shows "ohm resistance" then now it suddenly 0.61 ohms Does anyone knows what I did? did i do wrong? And another thing.. Bought charger on V.Empire @ Kepong Xtar VC2 worth Rm 90 anyone used this before? |
|
|
Jun 8 2015, 12:33 AM
Show posts by this member only | IPv6 | Post
#385
|
|
Junior Member
24 posts Joined: Feb 2013
|
QUOTE(Fallen84 @ Jun 8 2015, 12:29 AM) the (+) and (-) is for nickel to set it's resistance so the resistance won't jump up and down when you go into temperature mode So mean to say I can edit also my resistance there? I tried it back again i cant make it back to 0.6 ohms. |
|
|
Jun 8 2015, 12:39 AM
|
Senior Member
779 posts Joined: Aug 2009 
|
QUOTE(jejari7 @ Jun 7 2015, 11:59 PM) Yeah. This guy is full of sh*t. Gave me fake tracking numbers, lots of stupid reasons n lastly force him to refund my money. What a waste of time. I dunno about you guys but if I want to do sticker wrap on my mod I go to jwraps.com. They don't officially ship to Malaysia (coz of many fraudster) but you can pay them first then send an email to them stating you've paid & they'll send it. A bit pricey (US13.50 + 3.00 shipping) but the stickers are immaculately cut & the stickers are high quality (won't leave glue residue when you want to take it off). Many cool designs too.  |
|
|
Jun 8 2015, 12:43 AM
|
Junior Member
13 posts Joined: Nov 2014
|
QUOTE(mgchong @ Jun 7 2015, 11:26 PM) Hello! may i know where to get the replacement tank for Lemo drop? i just dropped mine I doubt you can find any replacement tank for the V1 Lemo , shops here don't bring them in . Check online , they probably have but double confirm on the quality 😁 (( |
|
|
Jun 8 2015, 01:10 AM
|
|
Newbie
1 posts Joined: May 2008
|
QUOTE(maudermunty @ Jun 7 2015, 11:38 PM) Its a guide to the suitable watt/volt for vaping. For example, at 0.5ohms, watt range is between 18W - 32W, and Volt is between 3-4 volts. Anything over that is considered too hot, and anything lower can be considered too cold. Treat it as a guide to find your own setting. Hi, just for reference. What i get from the chart, 0.5 ohm and the watt between 18-32w (3-4v) is under green zone. how about the coil lifespan? Actually the story is; My currently setting is 0.5 ohm with 23W, vape shop owner told tat high power will burn the coil very fast and lastly i drop back to 16-18W to prevent accidently burnt taste (i really hate tat, terus naik kepala)...At the end of the day, it all depends on your own preference. Some vape 0.5 at 13W also already feel syiok. |
|
|
Jun 8 2015, 01:15 AM
|
|
Senior Member
904 posts Joined: Feb 2008 From: Your Bed.
|
QUOTE(cyslock @ Jun 8 2015, 12:28 AM) So mean to say it shouldn't be a problem right? I panic like hell suddenly my ohms 0.61 already U can also check my charger Nitecore D2. Quite promising too I just checked online the charger i bought VC2 quite promising .Anyway both are awesome for me. I have friend using xtar and it does the job very good QUOTE(cyslock @ Jun 8 2015, 12:33 AM) So mean to say I can edit also my resistance there? I tried it back again i cant make it back to 0.6 ohms. No u can't. Its pretty normal my occ kanthal usually shows 0.4-0.6. However when u go nickel, make sure the coil is cool befor u set temperature, as the nickel resistance increases when it's heats up. So when its hot u won't get accurate reading. |
|
|
Jun 8 2015, 01:18 AM
|
|
Senior Member
904 posts Joined: Feb 2008 From: Your Bed.
|
Dayum.I'm scared to vape in red planet hotel (used to be tune hotel). Now downstairs vaping Zzzzz...
|
|
|
Jun 8 2015, 01:36 AM
|
Junior Member
172 posts Joined: Feb 2012 From: Georgopol
|
QUOTE(Vail @ Jun 8 2015, 01:18 AM) Dayum.I'm scared to vape in red planet hotel (used to be tune hotel). Now downstairs vaping Zzzzz... why got shemale? |
|
|
Jun 8 2015, 01:37 AM
|
|
Senior Member
779 posts Joined: Aug 2009
|
QUOTE(Vail @ Jun 8 2015, 01:18 AM) Dayum.I'm scared to vape in red planet hotel (used to be tune hotel). Now downstairs vaping Zzzzz... The smoke detector problem? |
|
|
Jun 8 2015, 01:57 AM
Show posts by this member only | IPv6 | Post
#393
|
|
Junior Member
65 posts Joined: Nov 2009
|
QUOTE(blabong33 @ Jun 8 2015, 01:10 AM) Hi, just for reference. What i get from the chart, 0.5 ohm and the watt between 18-32w (3-4v) is under green zone. how about the coil lifespan? Actually the story is; My currently setting is 0.5 ohm with 23W, vape shop owner told tat high power will burn the coil very fast and lastly i drop back to 16-18W to prevent accidently burnt taste (i really hate tat, terus naik kepala)... 23W isn't exactly high power for 0.5 ohm. What it means by coil burn (what I know la) is when the gunks stuck on coil due to flavor rate of burning higher than rate of juice wetting wick. So what this means is coil gunks up faster. this can be countered by1) taking shorter hits/longer intervals at high Watt to allow enough juice to wet the wick 2) frequent cleaning of coil 3) proper wicking (its amazing how much inadequate wicking plays a role in coil burning) 4) proper coiling (typically, a good wrap can last as long as a month) |
|
|
Jun 8 2015, 01:57 AM
|
|
Senior Member
904 posts Joined: Feb 2008 From: Your Bed.
|
QUOTE(wan.ridzuan @ Jun 8 2015, 01:36 AM) why got shemale? How u know  QUOTE(treblecase @ Jun 8 2015, 01:37 AM) The smoke detector problem? Ya stupid smoke detector. I heard ppl kena before. Don't want get fined |
|
|
Jun 8 2015, 02:23 AM
|
Junior Member
21 posts Joined: Mar 2014
|
QUOTE(Vail @ Jun 8 2015, 01:57 AM) How u know Can confirm. Vapor sets off the smoke detector. Just say it was a once in a lifetime experience Ya stupid smoke detector. I heard ppl kena before. Don't want get fined  |
|
|
Jun 8 2015, 02:37 AM
|
|
Junior Member
13 posts Joined: Nov 2014
|
Anyone know where to get top caps/accessories for Kayfun Lite and v4 ? ? I wanna change the look of my kayfun lite .
 This post has been edited by drafted: Jun 8 2015, 02:39 AM |
|
|
Jun 8 2015, 08:06 AM
|
Newbie
1 posts Joined: Dec 2014
|
morning ladsss and ladies
madhouz crest for me this morning |
|
|
Jun 8 2015, 08:31 AM
|
Senior Member
1,891 posts Joined: Apr 2008 From: Cheras
|
morning peps
|
|
|
Jun 8 2015, 08:37 AM
|
Junior Member
210 posts Joined: Dec 2012
|
kipidad morning with diy juices lel.
|
|
|
Jun 8 2015, 08:43 AM
|
|
Junior Member
17 posts Joined: Apr 2015
|
QUOTE(fauxfides @ Jun 8 2015, 02:23 AM) Can confirm. Vapor sets off the smoke detector. Just say it was a once in a lifetime experience Well there is a technique to Vape with smoke detector around. Do not blow directly at the detector. Use a shirt or cloth or if in hotel the blanket. Blow into it and it will absorb all the vapor. That's wat I did in the international plane toilet. Hehe. But do not Vape long lung hits la. |
| Bump Topic Topic ClosedOptions New Topic |
| Change to: |  0.0280sec
 0.21
 6 queries
 GZIP Disabled
Time is now: 8th December 2025 - 06:25 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.