I am using P4 2.8E socket 478 motherboard dfi 865PE-AL. What do u all think is it fix to my motherboard? If yes, how is the performance of scoker 478? Will it run below 50 celsius when full load? What is the market price now?Thanks all si fu

it should fit on most 478 socket mobo..
I'm using one on Abit Ai-7...
Using 2.4A P4 oced to 2.9G(capable running 3.2G)..
full load just around 55 celsius .....

but beware....the cooler is using 100mm fan which very hard to find...
unless you wanna mod the cooler or the fan..

bout the price its around rm210..

Err...
Where the hell did you find that prce?

RM210?

That must be from Lowyat Plaza isn't it?

Ask from moderno, and u'll get that heatsink for only RM165 for a new one liao...

**Threadstarter, i've managed to oc my 3.0E to 4GHz at 44Celcius on full load...
[I'm using an ASUS P4C800 E Deluxe (Sold all socket 478 pc already )]

Not sure about abit motherboard though, if i'm not mistaken, ABIT normally reports a higher temperature reading than any other motherboard manufacturer...

I am using P4 2.8E socket 478 motherboard dfi 865PE-AL oso
the heatsink fan wif the ori 1 veli noisy..
so i change to CM heatsink silent model(1 n half year ago)
i tink better than ori..oni price 70 like tat...

I'm using the heatsink, 1st thing in my mind is HUGE. very very heavy, if u don't install it properly it'll break.. tat's wat i heard from ppl. All in all, it is a good heatsink. My P4 3.0 OC to 3.45, idle load is 35+, full load 4get.. hehe

yes...you guess it correct..
lazy to search thruogh the thread..
sory for the price..

my room isn't equipped with aircon..
that why its reach untill 55celcius..
if i bring my pc to school lab sure can shot up to 3.6g
cold enough to allow me reach the speed..

p/s:did moderno sell the fan also..?
mine look like dying...

This post has been edited by hr_elie: Oct 28 2006, 07:25 PM

good cooler..check up with moderno..me got mine for him..i think was rm20-30 cheap then lawyatt

There's no way you'll find a 100MM @ 10CM fan on the market, or from any other seller...

Stupid CoolerMaster didn't sell the 100MM fan separately...

yealor... it's dam hard to find one.. shit.. now i'm afraid when mine dies then how..

Is it possible to mount wif 80mm or 120 mm fan other than 100mm?

nope.. don't think so. coz it was design for 100mm only

u can use cabletight.not just 80mm but 12mm also can.

What is the main difference between CM Hyper 6 and Hyper 6+?

Hyper6 = all copper
Hyper6+ = aluminium fins + copper heatpipes...

another thing hyper 6 heavy duty HEAVY and hyper 6+ a bit tincy lighter and better heat dissipation

What model and size of fan is best to mount onto the CM Hyper6+ ?

hyper6 might good...
but...too heavy i tink...might spoil mobo?

bro...it's all written here:
http://www.coolermaster.com/index.php?LT=e...U1+Hyper%206%2B
Next time..use google first.

BTW, the disadvantage of using hyper6+ is 100mm fan which is non standard i think.

No offend..I also noe wat the size and model of fan...I am now asking the one who use this cooler before to let me noe wat brand n size u all use, si fu lai lai lai help me...

don't quite understand wat u mean. But here goes, i din change the fan, just use back the fan tat came with it. Since it's 100mm, can't find any in the market since it's not a standard size.. hope tat answers u

As it's already fixed w/ 10cm fan, there's little hope, if any in replacing it. Even a convertor is hard 2 come by

Mebe u can drill mounting holes

Is this cooler perfomance same as CM Hyper 6+? What is the idle n load temperature
Scythe SCNJ-1000 Ninja Heatpipe CPU Cooler

Scythe Ninja is much much better than the CM Hyper 6+...

This post has been edited by sHawTY: Oct 31 2006, 05:53 PM

Is it still available in market? If so what is the price? What is the idle n full load temperature? Hyper 6+ and Scythe SCNJ 1000 have same heatpipe

same heatpipe but dimension different la. hyper 6+ uses 90 cm fan while ninja is 12cm fan. Hyper 6+ has copper fine so not idea for passive cooling. ninja on the other hand can work without fan. both are heavy but ninja may pose some problem as its size is big.

Anyone can answer me wat is the price of scythe scnj 1000 ninja in the market? Can it fit my DFI 865 PE-AL wif socket 478? I read the web adi it says can fit socket 478. I wan confirmation...Thanks all si fu..

try tis website...
www.modernopc.com