Outline ·
[ Standard ] ·
Linear+
Ultrawide monitor fan's club, Ultrawide master race
|
Pensuke
|
Dec 24 2022, 05:18 AM
|
New Member
|
QUOTE(eddie2020 @ Dec 24 2022, 01:32 AM) Yes I know about that. Haha my table abit sagging now and surveying table top currently. Another option I buy the wall mount like mount TV but it's not so flexing like pc arm. Anyone using mind to share experience and how much you guys bought? Saw a few like NB brand or something all price around 80.. Some review box saw it write 22 to 27 inch.. I holding my horse currently, not sure if it able to mount my 34 inch.. I use NB H100 for my 32 and 34 inch monitor (1 per each ofc). rated for 2kg - 12 kg, 22 to 35 inch monitor. Just need to adjust the torque and can adjust your monitor angle very easily. bought during monthly online sale for around rm80~ As for protecting your tabletop surface, I just bought the steel/metal mount plate with eva pad (a set of top and bottom plate) that increase the surface area to mount the clamp (price around rm20~). My tabletop is not solid wood either, just regular generic computer desk tabletop. But I mounted the clamp with the metal plate on the desk metal frame underneath the table since not enough tabletop edge space underneath the table to clamp on. my table frame is those thick metal bar one and very sturdy, not banquet table type of frame lah. Been using for a few months now with no issue or damages. This post has been edited by Pensuke: Dec 24 2022, 05:21 AM
|
|
|
|
|
|
Pensuke
|
Dec 25 2022, 03:03 PM
|
New Member
|
QUOTE(eddie2020 @ Dec 25 2022, 02:16 PM) thanks.. Will have a look... What is the Eva pad? Name of steel plate is it? oh, eva pad is a type of sponge or foam pad that comes with the metal plate. as dampener/padding/cushion layer between the metal plate and the tabletop. This is what I bought (the larger one) - https://shopee.com.my/product/74226638/1014...97-1671951527.9This post has been edited by Pensuke: Dec 25 2022, 03:05 PM
|
|
|
|
|
|
Pensuke
|
Dec 26 2022, 06:05 AM
|
New Member
|
» Click to show Spoiler - click again to hide... « QUOTE(eddie2020 @ Dec 25 2022, 03:26 PM) The original H100 seems better than F80 right? As it able to adjust the high with different structure. Hmm i think i might not need the plate or i just find some extra similar item in my house to act as the plate, cause i getting new table top with 25mm thick. I saw below is the cheapest cost over 110. The item FP1 add on we dont need it if our monitor have vesa support right? https://shopee.com.my/NB-H100-Gas-Strut-Mon...8c-a23ef133c069If your monitor is VESA compatible, no need for the add on. And yea, i went for NB H100 for its design and it's already stated it's for monitor up to 35 inch. might be due to the height clearance if you want to for example make the screen rotated vertically (portrait mode). I can make my 34 inch go portrait with good table surface clearance with H100 since it use vertical pole, but might not be able to with f80 since the height limit of the arm irregardless if it can support the weight or not. Plus with the vertical pole design, i can utilize more space under the monitor and still be able to swivel it around without the arm knocking over stuff unlike the f80. as for price, you may want to wait till 1.1 sale since it's just around the corner. I bought one for my bro during 12.12 sale on lazada for rm80 (with vouchers etc). From here - https://s.lazada.com.my/s.fm2pxThis post has been edited by Pensuke: Dec 26 2022, 06:07 AM
|
|
|
|
|