Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

> LYN OFFICIAL VAPING THREAD V22 - Dont Fap and Vape, " Waiting For Kunyit Juice "

views
     
pyrovier1689
post May 25 2015, 08:09 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
So over the weekend i got myself a bottle of madhouz crest , wasnt expecting too much since i jus needed some juice
but wow , its crazy good .
The pomegranate memang terangkat

btw good morning vapers sekalian
pyrovier1689
post May 29 2015, 11:32 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
guys , i tried using the steam calculator to calculate for subtank coil wraps so i know i need about 7 wraps on a 26 gauge for approximately 0.6

My question is what is the optimum size i should wrap around for ?Like wat size scewdriver i need to use ?

Now i running a coil that i wrapped quite some time ago , i think it might be a 2.8 maybe . I see the thing like heating up damn slow on a ipv 2

Does the diameter of the wrap actually affect speed of heating up ?

i always vape at 3.4 volts so that is the voltage i guna
pyrovier1689
post May 29 2015, 12:13 PM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(Siilver @ May 29 2015, 11:45 AM)
If you are using a 7 wraps for a 26 gauge kanthal and you wanna achieve 0.6ohm, it should be a 2.5mm. The standard blue screwdriver that comes with most tanks is 2.4mm. You can coil with the screwdriver.
*
Hey man , thank u so much .
I recoiled it back to the blue screwdriver and so much difference bro , not as tight of a draw as before this
I also jus remember all my other coils oso wrapped around a larger diameter
This is such a smoother draw

Subtank ftw biggrin.gif
pyrovier1689
post May 29 2015, 12:15 PM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(duke_hunt @ May 29 2015, 12:09 PM)
optimal battery discharge is at 3.7v..

for a sub ohm coil, especially for your coil, u need to fire at least 4.2v or better still since u r on ipv2, at least 22watts..

thats why it glows slowly when u fire at 3.4v..

do not fire below 3.7v as it will damage ur battery faster, same like fire above ur battery amp limit..

i'm not good in calculating battery amp limit but battery should be optimally discharge between 3.7v(based on standard discharge rate) and 4.2v(full battery charge rate)..

since newer battery has high amp limit between 30A - 40A, u can dischagre at hire volt, 4.2v and above max 5v iinm on single battery 7v+ on dual battery config..
*
owh shite , i did not know this
Pushed it back to 3.7 volts
Thanks for the heads up man
pyrovier1689
post Jun 2 2015, 08:09 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
for those asking about sweet fruity flavor
Im a big fan of pomegranate so imo the madhouz crest is an awesome flavor
really sweet and cold

Also been eyeing this American flavor High Voltage Shock treatment
got caffeine in it , not sure about that
but they have a pomegranate plus apple flavor so i managed to find someone who is selling it
pyrovier1689
post Jun 2 2015, 08:38 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(clarkblitz @ Jun 2 2015, 08:28 AM)
Can try hyper vape in sg wang plaza.
They got lots of high voltage flavor too, quite nice flavors they got too
*
never been there but i might since they have that flavors

i saw some reviews and all of them said it was crazy good flavor
pyrovier1689
post Jun 2 2015, 10:28 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
Are the shops in Malaysia already selling the evic vt ?
Already got one buyer for my ipv mini 2

Wanted to do the group buy but saw the time frame too long

pyrovier1689
post Jun 2 2015, 10:43 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(C2KBAS2005 @ Jun 2 2015, 10:37 AM)
guys, gals and sifu here.....am i having vaper's tongue or side effect from vaping?......when i vape the taste like bitter and blend, even when i vape sweet mango flavors...... nay advices to get back to normal condition?.....thanks a million
*
kopi kaw kaw bro
that might work for some people
pyrovier1689
post Jun 2 2015, 10:50 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
if u wanna clean ur brass and copper mod

lu kasi sapu tomato sauce , let it sit den rinse off
sounds weird but really works
the acids in there will clean it up real well

u dun have to take my word for it
u can always google

i clean alot of my home copper stuff with tomato sauce brand Maggi lol
pyrovier1689
post Jun 2 2015, 11:01 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(maudermunty @ Jun 2 2015, 10:58 AM)
rinse mod... Sounds legit.. Hahahaha
*
lol have to jaga jaga lar
put the saran wrap over all the electric components
only for outer tube can do

but now the more i think about
the more i think is hassle oso

pyrovier1689
post Jun 2 2015, 11:05 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(Nothing Better To Do @ Jun 2 2015, 11:03 AM)
vinegar + salt + oxidized copper nemesis = pink copper nemesis  laugh.gif
*
will be great for all the wimminz who into mechs
pyrovier1689
post Jun 3 2015, 07:56 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(farid_razak86 @ Jun 3 2015, 06:55 AM)
my m65 still have problem power reduced and weak battery. even after scraping both the top and bottom plate. how do you people solve this ??
*
In all honesty the SMOK m65 is rather bad mod . Me and my friends have since moved on from it . Once it gets that power reduced thing going on , the mod is done for. Get a new one mate

That would be the best option
pyrovier1689
post Jun 4 2015, 07:21 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
ipv 4 vs joyetech evic vt

which one do you guys think is the better mod ?
kinda lost between this two
its about 50 bucks difference between the both with the ipv4 being the pricier one

good morning lads and ladies btw

This post has been edited by pyrovier1689: Jun 4 2015, 07:21 AM
pyrovier1689
post Jun 4 2015, 07:36 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(SX vapor @ Jun 4 2015, 07:32 AM)
Whenever there is a decision u can't make over which one to get, get both just like I did. Haha...
*
bruh aku ada bajet lar
hahaha
pyrovier1689
post Jun 4 2015, 11:14 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(SX vapor @ Jun 4 2015, 11:03 AM)
I realized the flask is gone even though it's still in my cart. Anyway I removed it from my cart as my Evic VT is on the way.

May I ask how do u guys organize the group buy? Coz there are so many things that I wanted, maybe I can start organize but I have no clue who to contact. The manufacturer? Lol.
*
where u got the evic from mate ?
pyrovier1689
post Jun 4 2015, 11:36 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(SonnyCooL @ Jun 4 2015, 11:34 AM)
no budget can try evic lo ... cheaper n battery include ....
*
i think so as well
ony problem ,no shop got it yet
so so sadddd
pyrovier1689
post Jun 5 2015, 08:42 AM

New Member
*
Newbie
1 posts

Joined: Dec 2014
QUOTE(tlts @ Jun 5 2015, 08:23 AM)
can any1 explain maksud of mouth to lung and lung hit?not so pafam....and 1.5ohm is better for wat hit? and 0.50ohm pulak should use wat hit pulak.....just got SUBOX set...
*
mouth to lung is when u tarik the vapor into your mouth first and then u push the vapor into the lung , like smoking cigs lar
let it rest in mouth den push into lungs

direct to lung is when u use ur lungs to pull the vapor , like breathing liddat , no resting anywhere in between

1.5 usually flavor kaw so tarik into mouth and den into lungs

the subohm is more of a lung draw

This post has been edited by pyrovier1689: Jun 5 2015, 08:43 AM
« Next Oldest · The Museum Of Kopitiam · Next Newest »
 

Bump Topic Topic ClosedOptions New Topic
 

Change to:
| Lo-Fi Version
 0.0519sec    0.73    7 queries    GZIP Disabled
Time is now: 29th November 2025 - 07:27 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.