Only Cthulu RTA is top refill similar to KF4.

come come come clear stock ....
LG he4
rm 28 X1
RM 27 X2
RM 26 X3
RM 25 x4

Samsung 25r
RM 26

interested PM me, limited stock

Zephyrus is top fill as well. Dual coil RBA

LG - INR18650 MH1 18650
Capacity: 3200mAh
Actual Capacity :3014mAh
Max Amp: 10.0 A
Protection: No

They MUST have a protection circuit if you don't want to risk blowing your dick off.
Unless you have a device with built-in protection Additionally they'll probably only explode if your mod sucks

Also Make sure you check Ohms Law when you build your coils. If you need more info on what Ohms Law is feel free to PM me

This post has been edited by tankhunter: May 28 2015, 01:01 AM

Nice if u want to power ur torch light lol.

but for vaping 10A power output is just no no.

At least get battery with 20A to be safe. like the he2/he4, vtc4(30A if geniune, lots of clones out there), etc.

for example on ipv mini 2 0.2ohm builds on 70watt max output is 17+ amps.

http://www.steam-engine.org/

that is best website to calculate your coil and also to see ur capacity of ur mod imo

http://www.thehypemedia.com/2015/05/vapor-meletup.html

haha no rm1 kindda murah below rm20 can liao

y go dat low if wanna blow cloud? if u get the right build, 0.5 ohm also can blow huge clouds. the most important for cloud chasing is surface area, liquid ratio and wattage u wanna push.. so build and liquid is most important compared to lower ohm.

Is Joyetech Egrip good for starter?

Its awesome for starters!

Depends on how much are u into Vape. For what I see is most vapors who get egrip end up upgrading to a better mod and tank as its easily to get bored with egrip. Get a decent mod and u have the options to swap tanks or RDA and build ur own coil when u get bored. There are many different crazy coil build that u can't imagine. Hehe. Once u start, the poison starts to run in ur blood and u will end up with few mods and plenty of tanks or RDA!

What's the different between EGRIP OLED / and with RBA?

OLED is the mod type kannn. RBA is the atomizer. lain wo bro.

Yaya i know , cause i saw hypervape selling oled grip with RBA and one is without rba.

don't really understand the rba thingy

I kena vape tongue

rba is rebuildable atomizer.. kan?

egrip oled is egrip new version that come with LED display.
egrip come with their own coil head, means cotton burn u need to change coil d. (something like OCC)
RBA : means u can rebuild the coil.

How much would that cost for the OCC? One pack?

How you guys refresh your rba coil?
Saw youtube they dry burn coil then run through water lol seems dangerous to kena electric shock. Anyone tried this method before?????

I always dry burn and blow away the gunky only.

This post has been edited by rko1268: May 28 2015, 10:33 AM

The RBA is an additional piece of hardware attached to your egrip. So if you are not comfortable with building your own coil yet, just buy a pack of occ (normally 5 pieces per pack) and get into RBAs after you are comfortable with DiYs for coil and wicking.