Clockgen, How to find the PLL
|
|
 Oct 25 2006, 03:13 PM, updated 20y ago
Return to original view | Post
#1
|
 
Junior Member
66 posts Joined: Sep 2006 From: the Darkside 
|
I'll be going to use clockgen to overclock my com..but clockgen can't detect the PLL on my mobo..so i must manually select the PLL model...
The problem is i can't find out the model number coz i don't know exactly where this chip is located on my motherboard  Any of you oc pros can help me with this? and please give me some tips on using clockgen.(will have to use software coz my mobo is locked) This will be my first time oveclocking my com. |
|
|
Oct 25 2006, 11:46 PM
Return to original view | Post
#2
|
|
Junior Member
66 posts Joined: Sep 2006 From: the Darkside
|
QUOTE(watcher @ Oct 25 2006, 10:57 PM) >The problem is i can't find out the model number coz i don't know exactly where this chip is located on my motherboard Thanks... D PLL chip is a chip 'bout 1" x 0.5cm while many small legs along d body length-wise. Sometimes, on a motherboard, they maybe more >1 PLL & some other ICs while resemble it too!. Usually there's a crystal (a oblong, pill shape liked metal like component 'bout 1cm by 0.2mm) accompanying it.  Refer d attached diagram. i had a brief look into my casing but i could only make out the first 8 letters of the number CY____....even with 2 led fans and my handphone as an extra light source  ...now im off to look for a flashlight..I have another question...how do i lock the agp/pci clock speeds so when i increase the fsb, they won't increase as well? |
| Change to: |  0.0142sec
 0.20
 7 queries
 GZIP Disabled
Time is now: 30th November 2025 - 02:51 AM |
Quote