Enermax Liberty 500W...

It never fail to impress me...

This post has been edited by sHawTY: Nov 16 2006, 10:10 PM

That PL 450W is the magnum version...

Don't go for PL Magnum, it's not true powered at all...
It's only 225Watt true powered, which is half than the amount stated in the sticker...

If you're really in a tight budget, then i think CoolerMaster Extreme Power 430W is good enough for you...

But if you need more power, get Powerlogic Atrix 500T, it's 500Watt true power...

Powerlogic ATRIX 500T - RM169 - RM179 [At LYP] if you're lucky enough, you might get it for RM150...

But it's not stable enough compared to my new Enermax Liberty 500W

This post has been edited by sHawTY: Nov 17 2006, 09:10 PM

U mean RM225 or US Dollar $225?

If RM225, then it's not ATRIX 500T, it's ATRIX 600T <-- the 600Watts version

ATRIX 500T - 500Watts
ATRIX 600T - 600Watts

There's no way an ATRIX 500T is tagged at a price more than RM179, if that happens, then you must be looking at the wrong shop liao...

sHäwTY(tm)

This post has been edited by sHawTY: Nov 19 2006, 10:44 PM

I've used this casing before.
And removing the front panel isn't as hard as you think.

I don't quite remember how do i take it out though.
But, it leaves to two choices:

1) Look for some screws, if there is screws, take out the screws first.
2) IINM, the knobs need no pushing or clicking, you just have to pull out the front panel harder than what you've been trying before, don't worry bout it, nothing will broke. You just have to pull harder, but i doesn't mean to be the "hardest" just pull the whole front panel harder.

Remember to take out the front door first or i'll swing in and out while you're trying to take out the front panel.
If you don't take out the front door first, you might snap the plastic hinge that's holding the front door, so take out the front door first.

The front door is easy to take out, all you have to do, 1st swing the front door, there, you'll see a plastic hinge on the top & on the lower part of the door.

swing slowly, and you'll identify on how to take out the front door, by swinging slowly, and push the lower part of the door to the top until you can take out the front door.

After you've done taking out the door safely, then pull the front panel of your casing harder than what you've tried before.
There is no need to pinch the 6 knobs with pliers or anything, just pull the whole front panel slow, but hard.

I hope that helps.

I did, but that was like 4 years ago.

And changed casing plenty of times, how am i going to remember 100% on all of the casing i used?