It would be kind of oily to use WD40.....

after WD40 ... u would need other cleaning liquid to remove the oil stain ...

hehe, so any1 polished their ah lian?? sending my case to ianho for blow hole...

Blow hole for which part ?? Exhaust ?? give us a bit of tip before uncle seduce us again with his deathly mod....

nothing...just a simple blowhole at the top of my case...the 80mm fan is freaking annoyingly loud... hahaha...no major mod here..

read installation guide....

Eh, I had been thinking of doing the same thing as you. I have a PC60 as well and the 'built-in' grill (like the picture Mersing put up) is seriously impeding the air flow and the vibrations coming off are kinda annoying as well.

You sending in your entire case to ian? Cos I've no idea how to take off the top bit and pass it to him. Don't really want to unplug the whole PC and bring it over to his place.

Oh btw: Found a bottle of 3M aluminum (or general metal surface polisher). Works pretty well (spray and wipe off, didn't really have to rub it too hard to get the smudges off). Zippo fluid probably works fine as well.

Dei, I know where u got that 3M spray from. U stole it off the cleaning lady in Ikano. They always leave it in the cleaning carts while they sapu lantai elsewhere 1.

This post has been edited by ianho: Nov 27 2006, 10:40 PM

She put up quite a fight ler. Had to knock her out cold before making a quick getaway.

you're funny....where you get it from?? ACE hardware?

you're funny....where you get it from?? ACE hardware?

From some hardware shop in Klang (near LaSalle Klang). They even had a dremel for sale at that shop. Trust these small town people to stock what you really need.

Eh eh sidewinderz dude, how did you take off the top bit of your Lian li case la to send to ian la?

not taking out anything, i'm going to pass him my entire case....minus the things inside of course.. you wanna do a blowhole as well??

tyrion4,

how much did the 3m cleaner cost?

There's no way for u to remove the top panel unless u wanna drill out all the rivets n remove the top panel.

@cablesguy RM 30

@ianho Oh i'll send it to you in on the second week of December if that's the case. I'll PM you then.

@sidewinderz Yah, I'm been thinking of it and seeing how you're doing it as well now... probably will ask for a 120mm hole to cut off some fan noise.

I've never seen a use for the blowhole on my PC60, so I've sealed off the entire top of my case with sound dampening material.

That 3M polish looks interesting though, does it leave black smudges like Autosol that you need to rub off later?

how do u stick the sound dampening material to the top panel? cellophane tape?

Hot air still goes up...so might as well make use of the conveniently located blow hole to get rid of it. I used to be able to warm just from the heat generated from my computer during winter (with the room doors and windows shut). The moment I opened my door to go the living room, boy was it cold outside.

Haha, my grandfathers tale.

Yeah, the 3M spray is foamy and i haven't had any residual stains in my case after wiping it down. Tried a bit of it on the anodized aluminum and it was fine (although I don't see why anyone would need to do that)

If you guys want, I don't mind letting you guys give the spray a try if you're in subang or anything. Not that i'm advocating this product, but i'd be happy to let you guys give it a try before actually spending RM30 on this and coming back to flame me good. Just drop me a PM. I'm in SS18 and im usually free in the evenings.

Alternatively, you could just knock a cleaning lady out cold at Ikano and give it a try before she comes to her senses...

Just got Zippo and use it to clean my Lian Li intimate brand "GT"....

it could get rtid off the stain on the surface but doesn't seem to be able to restore the shine like brand new one...

maybe should try the 3M stainless steel cleaner ....

saw the 3m cleaner in h/ware shop in pj, almost 40bucks, somore dowan to less...so ended up not buying...wonder if tyrion4 can pinjam to test or not .

btw anyone know where to get the lian li dust filter sponge...search everywhere also dont hv, thot of asking ian to add acrylic dust filter but no filter to put in haha.