My current house wall switch come with neutral wire. But I am moving to a condo where all wall switch don't come with neutral wire in next few months.

Is is possible I get a Aqara wall switch (no neutral) to replace my current house wall switch? As I just want to try it out, and bring it to my condo later.

No, my house don't have any smart switch yet. And I don't plan to pull neutral wire for the new house.
But I would like to try out smart switch now. Just wonder if I can get a no neutral aqara smart switch and install it in my current house or not.

Mean I can just don't connect the current neutral wire?
I bought an Aqara M2 hub during 3.3. And currently looking to get Aqara E1 wall switch as this is the cheapest Aqara switch I found.

I know this sound stupid, I need to use insulating tape to insulate the neutral wire, right?

I wasn't sure. But I think those neutral wires came together when renovation 10 years ago.

Good question. Don't think it's wire that no longer in use because still connected to current switch.

It look like this, that's why I thought it is neutral wire.

I got no idea, I shall take more photos from different angle and ask again.

It's a 2 gang wall switch.

Thank you for clarification. Can I loop with Aqara Smart switch?

How to tell which models need 'bypass' capacitor? I am looking at Aqara E1 2 gang switch (No neutral).

This is my aircond 20A switch. In order to use Aqara switch with neutral, where should I connect the neutral cable to the Aqara switch?

N1 or N2?

So I have to find out N1 or N2 come from DB, and connect my Aqara switch to there to achieve neutral loop?

I think I might did something stupid. I got an Aqara A100 zigbee version and Aqara M2 hub (global version), but Aqara Smart Curtain/E1/S1E switches (China version).

Can the A100 pair if I set the M2 hub to China region? Or I have to set those China version accessories to Homekit mode?

Ok, I will try it out once the installer install my A100 door lock.

Apparently, I can add the Global M2 into China region.

But changing region need to pair all your 40+ switches.

I bought from Kilobit in Lazada, and they come with installation.

I have a very weird situation. I owned an ASUS TUF AX5400 router, and LG Puricare water purifier + LG TV in my previous house. They are connected in ThinQ app, and always online.

But when I moved to new house with the same router, with more smart devices, eg: Aqara E1 hub, S1E panel, LG washer and dryer, Samsung Bespoke fridge. LG and Samsung devices started act weird and offline in ThinQ and Smarthing App until I reboot the router.

After reboot, all LG appliances show online, but after some random period, from 15-30mins, maybe more, they started go offline. Same goes to Samsung fridge.

The router have the same setting like my previous house. I tried to remove the Smart Connect, to separate 2.4Ghz and 5Ghz, disable 802.11ax mode, set static IP, none of them help.

I even remove all appliances from ThinQ and Smarthings App, and leave the Puricare in the ThinQ app, it still show offline where it work flawlessly in my previous house.

Aqara E1 hub and S1E always online though.

I wonder what is missing in my troubleshooting.

I made the 2.4ghz to WPA2-Personal still the same.

Made some changes in router and so far everything stable.

1. Separate 2.4Ghz and 5Ghz SSID
2. Disable 802.1ax mode
3. Change channel from 1 to 6. Not sure this does help or not since my old android phone cannot scan channels nearby.
4. Change channel bandwidth from 20Mhz/40Mhz to 20Mhz only.
5. Change Authentication method from WPA2/WPA3 to WPA2-Personal only.

Delete all IoT and add again.

I saw Aqara Z1 Pro switch in MY region. May I know that if I buy Aqara Z1 switch from China, will it work with MY region?