hi guys, having problem doing port forward with my new Linksys ADSL modem (AM300 - Annex A)
you can refer to the snapshot,

1. when i click on SaveSetting, it is looking for /cgi.exe as you can see from the status bar at the bottom.


2. then after a while, dead link


any idea?

thanks.

This post has been edited by bobtiang: Oct 17 2006, 09:06 PM

sorry boss, seldom post for help.
thanks for moving this to the right section.
please help..

This post has been edited by bobtiang: Oct 17 2006, 08:36 PM

aiyo.. just bought it few days ago, need to upgrade firmware ?

ok, another question, currently I have the following devices:

1. Linksys ADSL2 Modem (AM300-Annex A)
2. Netgear Wireless Router (MR814 V2)

i think we can have a few combination of setting here. not sure which one is the best, please give input and how I can set up those structure.

currently, i have it setup like below:

1. Linksys ADSL Modem:
Encapsulation: PPPoE mode
DHCP:On
DSL Modulation : Auto
IP : 192.168.1.1

2. Netgear wireless router
- no login required
- wireless On
- DHCP: Off
- IP : 192.168.1.100

Connection:
From Modem ethernet --> Wireless Router LAN port 1
PC (Fixed IP) --> Lan port 2
Other wireless device (Auto IP) --> Wireless AP

Note: As you can see, I never use the WAN port in the Wireless router, because I dont want to get 2 IP in my LAN setup.

Setting B:
1. Linksys ADSL Modem:
Encapsulation: Bridge Mode only
DHCP:Off
DSL Modulation : Auto
IP : 192.168.1.1

2. Netgear wireless router
- Login Required, PPPoE Mode
- wireless On
- DHCP: On
- IP : 192.168.1.1
Connection:
From Modem ethernet --> Wireless Router WAN
PC (Fixed IP) --> Lan port 2
Other wireless device (Auto IP) --> Wireless AP

I am trying on this setting B, but i cant get internet connection..

any idea why ??

and any other combination?

thanks for your feedback!!

hi kytehx, why do you need to use USB instead of LAN?
and your setting looks good .. still cant online?

hi cyberic,

can you access AM300 modem directly from ur PC?
my setting looks similiar to yours except the IP for AM300, i couldnt remember what IP i set for my AM300... die lah

hence i cant go in to AM300 and check for my DSL modulation.