Topic Title- Project: A Continue Journey of HAF932
Topic Description- It an Update From my old Project : https://forum.lowyat.net/index.php?showtopic=3011408&hl=

So Update From previous Project which this :


As you can see most of my case is red(Floresent Red)
Get ready For Red colour Case Themed

So here My Hardware Specs :

Processor: Intel Core i7 2600k
Motherboard: ASUS Rampage IV Extreme
Memory: G.Skill RipjawsX DDR3 1866MHz 2x4GB
Graphics Card: Gigabyte Geforce GTX680
Storage: 1x Samsung Evo 128GB + Lite-on Msata 128gb + Western Digital Caviar Blue 1TB
Power Supply Unit: tagan dual engine tg700-u25
Casing: Cooler Master HAF 932 AMD EDITION
Operating System: Windows 7 Ultimate 64-bit
Fans: Scythe Gentle Typhoon 120mm X3, Cooler Master Sickle Flow x2,Cooler Master Blade Master 120mm x1, Aerocool Shark 120mm x2, Aerocool DS 120mm x1

Water Cooling Parts:

EK Supreme LTX Nickel Plexi Cpu WaterBlock x1
SWIFTECH MCR320-QP STACK Radiator x1
SWIFTECH MCR220-QP STACK Radiator x1
SWIFTECH MCRx20-XP Radiator 1x
XSPC Dual 5.25" (Dual Pump / Dual Split Reservoirs),
2x Laing DDC-1T Pumps,
BARROW 210mm Reservoir x2
MIX of fitting Include : Bitspower,barrow,xspc,swiftech and some unknown brand
7/16 5/8 Size of tubing

This post has been edited by JoelBubu: Apr 13 2015, 11:12 PM

Planning The Journey

So I was Planning to remove My HDD and ODD bay as I not used it anymore
So here what I plan :



Gonna give some credit to F1 In School moment. Without them I wont I using this solidwork as my plan design

So let get to work



SPRAYING TIME !!! RED RED RED
It time to Spray Some Fitting and Radiator.

Note : **If U happen to spray ur fitting, Please takeout the O-ring rubber and Please cover the Screw Part and Inside ur fitting






So here the Result with UV LED



This post has been edited by JoelBubu: Apr 13 2015, 10:11 PM

Sorting Out

So done spray and done planning, now trying sorting out how to put and screw everything.


Hanging/Flying HDD and SSD

So i found this very useful 90degree angle for my HDD and SSD which made from steel
it fit with m3 size screw. Get it from a nearby hardware store.



and...................... the result ! it fit


Quite good from my HDD. hihihi
Btw My HDD is Hiding Behind My 2 Reservoir(check the planning)
I forget to draw/design it. haha


Extra Work BUT NOT INCLUDE IN FINAL RESULT Due to blocking my Pump
This Was Actually Inside my plan But end of the result it blocking my pump and cant do anything except remove it


This post has been edited by JoelBubu: Apr 13 2015, 10:33 PM

Order from China

All The Barrow Stuff. Quite Good Actually the quality. Thumb up !


Look at that Thickness

Acrylic Stopping Fitting

This post has been edited by JoelBubu: Apr 13 2015, 10:37 PM

Final Touch Up
Doing some Sleeving with some fan and cable. Keeping everything clean


Final....Final Touch up


This post has been edited by JoelBubu: Apr 13 2015, 10:40 PM

Done !

So here the final Result. I have to Small out the image due to Hard to upload Here.
Full Pic will be Upload At my Page : https://www.facebook.com/pages/Speed-Freak-...02274619?flyingspaghettimonster=hl











This post has been edited by JoelBubu: Apr 13 2015, 11:10 PM


Attached thumbnail(s)

wow bro sick!!! awesome build. BTW where did u find UV Paint?

Thanks bro! Haha. I used this xD for UV spray.

wow. didn't see it around the place i live. i might have to find few of those... nice work all in all. and thanks

New Update will be up soon with some glo.weeeeee stuff xD

Lastest Update !!!!

Sad news.....
My GTX 680 pass away few week ago and i have to end my gpu water cooling.
So i end up buying a new(2nd hand) gpu 290x Lightning without water block

but on the bright side. it a upgrade
Then I add something to make my pc glowy





Dont Forget to like my page !
Speed Freak PC & Mod Team

This post has been edited by JoelBubu: May 19 2015, 12:11 AM