I hope im in the right place.

Im about to buy this car. Everything that i need to know is already in the internet, but i cant find this info anywhere

For inspira, how well is the sound system?
How many speakers, what brand, the infotainment ok or not, etc

later ppl ask batman come out slap u u know... 

which service center u bring yours to?

i got letter also, those small service center like senaxis can do this? lazy to drive all the way to COSE.

is a mivec engine, and for those who love the car will always love it, feedback for the car ahh, u need to read back from V1 post jor, but most important is base on yrself whether you will regret or not since the badge is wat all ppl looking at. To be very honest, from the time when I brought the car till now, no 1 even interested to ask more about the car or take a look. So pls have this prepare in mind before u feel like ppl tot u syok sendiri.

they KESIAN you only..
already Sohigh .. if laugh in front u .. scare u go jump from 14th floor

Did they ask you to drive them to lunch everyday?

is mivec... 

changed mine last december..2.0 windscreen with sensor + proton logo RM800 including labor..

insured Rm1k..gao dim, the shop give me Rm200 rebate some more as they claimed with insurance Rm1k

if u asked me i really want to buy inspira but all the sifus recommend me not to buy the inspira. if the owner of the car say not to buy it there must be alot of problem with this car.

Dear all sifus,

am thinking to get a second hand 1.8mt or 2.0p.

what are the common problems i should prepare for?

for 2.0, the gearbox reliable? I have trust issue with auto gear box :/

pls dont troll

niameh..dont mislead people..Prof Jay said, got PRC smell.

you dunno dont simply mislead people la, professor always correct 

Collecting good karma ..
Dont quote my post and troll k..

------------------------------------------------
- Ultimate Guide Sin+LinKam for Inspira -
------------------------------------------------

Common FAQ
1. What is the difference between Inspira and Lancer?
It is basically the same car with different front and rear bumper. Lancer is build in Japan Mitsubishi while Inspira obviously build by proton.

2. I heard from [INSERT WHOMEVER NAME] that Inspira parts are mostly local, is that true ?
Absolutely wrong, these people do not know about manufacturing process, or they just butthurt (sorry) that Inspira is way cheaper than Lancer.
Why i said so? To build the mold for each panel cost a lot. and i mean a lot! proton are mearly selling 30 units per months (maybe slightly more), there is no logic sense to build the mold themselves and lose more money. All the Metal penal are all shipped from mitsubishi and assemble here.

3. What are the localize parts ?
mostly internal plastics, (A,B,C pillars), absorbers and springs. front and rear bumper obviously. Complex plastic molds are still from mitsubishi, example, dashboard (However the trim are from proton)

4. What about engine and transmission , i heard from [INSERT WHOMEVER NAME] its a campro
The deal between proton and mitsubishi is drive train and body was to be remain. Infact the engine ship in as fully assemble from Japan. Yes, because the number of units are low and to build engine you need to properly train the technician with all the proper tools. For instance, your engine have 4 piston, but each piston is different in size (slightly for manufacturing tolorence),

All the engines are from Mitsubishi There are :

1. 4B10 - 1.8L
2. 4B11 - 2.0L

Transmission are from Jatco (CVT) exactly same as the lancer, infact it is better than the first batch lancer which comes without the cooler.
The manual version are from aisin exactly same as the lancer manual (not available in our market)
Common Issue
1. dashboard glovebox rattling. (inherit from lancer, most fixes are DIY)
2. dashboard rattling . (inherit from lancer, GLUE it)
3. seatbelt area rattling .. also inherit from lancer, normally put some sponge inside
4. door panel interior rattling, it is cost by the lock/unlock cable hitting against the door panel - this is proton good work, they didnt insulate properly, DIY to fix.
5. rear board (dunno what is called) rattling .. this is proton good work also .. panel made by hicom, somehow got sound, i swap mine to lancer one with ISOFIX geh
6. Clutch pump failure for manual
** I cant think of any other common issue that happen thou ..
Mod List - JENG JENG JENG
Before you start reading this portion, let me highlight again and again, these mods are retroffit from lancer (not only local but overseas models) means these are not 3rd party mods but it is actually LANCER accessories that we put into the car and activate them.

1. Cruise control (yes manual also can cruise)
2. mmcs (SATNAV @ GPS wont work as mitsubishi never develop map for malaysia, it is proprietary mitsubishi software not garmin or papago)
3. projector headlights (not only evo have it, lancer as well)
4. ASC (Some call it ESP)
5. Automatic climate control (1.8 cvt / mt comes with manual one)
6. RLS (Rain Light sensor, auto headlamp and auto wiper) (1.8 cvt/ mt does not comes with this)
7. 7 airbags (additional of Knee airbag, side airbags , and curtain airbags)
8. KOS (keyless operational system, no plug in your key to start the car )
9. side folding mirror (our etacs does not support, option is to add 3rd party module, or swap etacs , or mod the etacs )
10. AFS (Adaptive front lighting system)
11. Autoleveling system (for headlight)
12. Manual Leveling system (early batch comes with the plug, you just need the switch, all the batch of inspira comes with motorize headlamp)
13. color meter (plug and play, mitsubishi logo need to be activated thou)
    - 8,000 RPM [180kmh]  - JDM specs
    - 8,000 RPM [240kmh]  - General Export Specs
    - 9,000 RPM [270kmh]  - Ralliart Specs
    - 9,000 RPM [300kmh]  - Evo X spec
14. autolock at 20kmh , enable from etacs
15. 120 kmh warning , buzzer and light , enable from etacs .. so far only one so high have it .. [you know who you are]
16. Brakes upgrade (original - Front 15", Rear 14")
    -  Front 16", Rear 16" (same like first batch lancer GT or all 2.4 sportsback , 2nd batch onwards all same brakes as ours)
    -  Front 16" (twin pod) , Rear 16" (Ralliart Spec)
17. 4wd system (normal) - got a set, but too bad CVT gearbox, so no go for me
18. sunroof - i particularly not interested for car in malaysia
19. power seats (driver) - quite hard to find, mostly australia spec with leather .. not my cup of tea
20. heated seats - i dont think you want
21. reverse camera on the rear view mirror - original is pricy.
22. OEM rockford fostgate audio system
23. lancer OEM 6 CD changer (interested can PM me, i got 2 sets)
24. hood sensor switch upgrade

** that is all i can get out from my head for now ..
Remember these are ORIGINAL Lancer equipment.

Many reason.
1. Car heavy, brakes work overtime to stop ur car
2. Soft absorbers. Yes. It fucuk up the braking, when u brake the weight of d vehicle shift to the front, with soft absorber the weight have to be fully handle by the brakes.
3. Small brakes, less surface.

Solution
1. Flush brake, temporary
2. Bigger brakes
3. Stiff absorber, reduce comfort

Your brake not so makan is brake fade or what?

bigger brakes results in bigger brake pads..you can't have big brake pads but brake calipers are the same. it won't fit your caliper.

for you my friend, I strongly suggest wilwood 4 pot. RM4-5k including shipping from US.

con9lan7firm you will have powderful braking power!!!!  

why my car no exhaust smell geh? only iswara got 

exhaust wo? not hambalang carbon monoxide or something? lol

Anyone know where in KL area can duplicate inspira key? lost my key..shit..