Hi.. I have split to 14 monitors using 2 splitter with 8 port, but video ouput was blurry and colour also not nice.. What else should i get for better output?

usually blurry and fading color are due to signal loss, either bad cable or bad connection.

since you are using splitter (which i have no experience) another thing i suspect is the video signal power is too weak but just my guess, is the splitter powered?

yes power on.. im using this kind of video splitter..



This post has been edited by Dinoresha: Jan 29 2015, 12:22 PM

check and make sure all cables are good without using the splitter, means test 1 cable at a time, direct connect from display card to monitor.

if all cables are good (display are clear and colors are good) try connect through the splitter. if they become bad, i would say the problem is at the splitter, maybe the quality is bad, or unable to handle the resolution and color depth you are trying to display.

try reduce color depth and resolution and see if it becomes better.

if all resolution and color depth still give bad display quality. i guess you need to change to a better splitter.

please post your findings

This post has been edited by sodifhas: Jan 29 2015, 12:54 PM

ok i try it 1st..

Already tried testing cable 1 by 1.. cable in good condition.. but the signal if using spliiter still the same.. Is there any booster for video signal if using splitter?