Check this out guys... Jus wanna show you my casing

I've stated this case mod for quite a while now... jus that i have been busy with my studies so i can't fully focus on it till my semester ends. Then thigns will get rolling again. But i'll show what i've done so far... I will not show an image of how it'll look like in the end. (KEEP THE SUSPENSE- IF IT COMES OUT COOL!) I'll show you guys most of the step by step i did but not all as i am lazy to take the photos all the time. To busy and rushing to do the mods....

The look of the case before modding...













Once i got my casing... i stripped it but naked... here's a pic of it..





This post has been edited by Xtreme_Hightz: Aug 13 2007, 01:45 PM

Once i stripped it naked... i started to plan. Now some of these images are jus for planning... was not too sure how i wanted to case too look like. I might change my idea last minute.. so these are jus teasers...

This is the front door belonging to the front panel area...



So... i did the front first since it was the easiest...





In the end... it looked really nice. Not too bad for a noob working with a dremel.






This post has been edited by Xtreme_Hightz: Oct 15 2006, 01:54 PM

i also have a casing look alike but can mod like u or not


Attached thumbnail(s)

Wow... nice casing mates. You made it really simple but nice. I'm planning to do mine the same colour lighting as yours.. hence the name "blue inferno".
Anyways... I'm going through my exams now so i cant do much work on my casing yet... but i will get alot done really fast once my exam is done. So please visit more often after the 11th. That's when i will do work on this baby... hopefully by the end of this month... it'll be ready.

Nice mod from a new modder...

Update update pls~~~

im still waiting for a new pic.give your camera a few smack shud be good LoL

Haha... sorry guys.. going through exams still... i didn't know i still have some papers to do.. study last minute Will get back soon and continue my work. Glad you guys are interested.

hey..your case is same with mine..mind to do it for me too?? hahaha..good job..

Okay... i wanna apologize to you guys cuz my left panel planning pic got corrupted.. dunno how it happened but it did. Anyways... i did the cutting in a few hours after i did my front door panel area. This is how the left panel turned out. I haven't smoothen the edges yet... hopefully you got a rough idea how it'll look like in the end.









MY stupid but cute cat.. very interested with modding as well...



Great!!! now my right side panel pic is also corrupted.. f***in camera... haye.. anyways.. i did the cutting... now it's 11:30PM.. couldn't sleep so i jus finished up the right panel and passed out once it was done. Here's how it looks like.







The flames on the left side is for ventilation. Later i'll do a small window with mesh wire for it. The top right hole it for the PSU. I'll be doing a small PSU laters where the psu will have windows and the light from it will come out from the panel slot. Hopefully it'll look good... now only still imagining it.

This post has been edited by Xtreme_Hightz: Oct 15 2006, 02:09 PM

Dude, pls use bigger pix. It's very, very annoying having to download every single pic n go tru that imageshack pop up add for all ure pix. I end up not bothering to look at the pix in the end coz the pop up is just so annoying n it takes ages to DL each pic too. If u use larger pix we can just open the page, sit back n wait for the entire page to load up. Don't worry about size of pics. I allow pic size of up 800x600 n even 1024x768 if u need to show sum detailed shots.

agrreee..
hard to download one by one...
800x600 better in one page..

nice one.. looks like shuttle from nasa..

Hey guys... here's my latest update... sorry for the delay. I have been bust with helping my mom since she jus came out of operation so i couldn't work 100% on my casing.. but i did get alot done. Not to bad actually but still the rough layout of what's to come. here's a few updates i have made...

I want to make a top compartment area for my CPU. This is what i came out with... it's not yet complete.. still undergoing major changes.

My top panel for my case after cutting it... phew.. alot of work..









Using Epoxy to stick the top compartment to my top panel.

I also managed to play with bondo. Gr8 stuff... alot of fun but also alot of hard work... this is jus one layer of it.. i have to still put more. that i will do laters... for now.. gotta help my mom...







That's all for now.. for the top compartment... needs more bondo work but laters. I've also done some small work on my switch panel face plate. It's not complete yet as well... jus some spare time stuff i did..

These are the right panel window frames i was talking about earlier. They're not totally complete yet... my idea is kinda changing... planning not to make a window.. instead a window with bondo work. Still thinkin.....







The window and switch templates together.



Oh yeh.. totally forgot... i also did some sleeving. not the best of work but what can i say... i'm still a noob. Overall... they look pretty good to me.. "phew"

Does anyone know where i can get UV male molex connectors... as you can see i really need them to go with my Y-cables... and other cables as well.. please help

Nice mod you got there, im gonna continue mine now ,lol the top panel compartment i was thinkin almost like urs ...

Hey guys... i was so bored jus helping my parents pack... i thought of doing atleast something. So i thought of changing the look of the front panel. Didn't really like it and to get rid of the fron USB compartment as well. So i used my new best friend... bondo to do the changes. Came out okay cuz i messed up abit at the USB compartment. The Bondo dried out faster then expected cuz i wanted to take photos... won't do that again... hehe... anyways.. here's what i got done.









This is a rough look on how the right panel should look once it's done...

Har, lidat lar nice. Now can c all ure pix.