1.Insert CD into PC CD driver, and then paste the file “USB-Driverxp” into Local Disk C”\
2.Turn on the Digiprog 3 ignition switch, and then connect Digiprog 3 main unit to PC via OBD2 cable.

3.You will find the PC screen pops out a window “Found New Hardware Wizard”, and choose the second choice and click “Next”.

4.Next, you need to setup location directory, save in the file “USB-Driverxp” (previously paste into C :\) and click “OK”, and to click “Next” and “Finish” to complete the process.
5.Open the file “AE39D809”, and to double-click “Digiloader1”, you will find “COM4 – USB Serial”, then right click “My computer”>> “Manage” >> “Device Manger”>> “Ports (COM & LPT)” and find the setup “USB Series Port (COM4)”.


6.Click “Select the port and click me”, and wait for loading… and then pop out message “ok”.

7.Turn to the Digiprog 3 main unit, click “?”, and input the password and click “?”again.

8.When finish Step 7, it appears a new windows (Digiprog 3 main menu and version information) shown below.


This post has been edited by bangbong: Jan 22 2015, 03:28 PM

The item is not related to Computer.

It should be posted under "Car" section.