Outline ·
[ Standard ] ·
Linear+
Project Grimmm Blanco, New Rig building with water cooling syst
TSGrimmm
|
Feb 2 2015, 09:19 PM
|
Getting Started
|
QUOTE(azilazwa @ Feb 1 2015, 11:05 AM) [/spoiler] the top rad will be outside of the case (on top of the case)? Quite surprised that a big case like enthoo primo also cannot handle this thick rad. More pics please~ Here you go bro you ask me before did i always stay on my OC settings 24/7 and i said yes.. becasue the normal load showing below temp. Not air conditioning room.. use fan only This post has been edited by Grimmm: Feb 2 2015, 09:20 PM
|
|
|
|
llk
|
Feb 2 2015, 09:20 PM
|
|
QUOTE(Grimmm @ Feb 2 2015, 09:14 PM) Yeah i agree.. the VRM heatsink is high and clerance also very slim.. maybe changing the rads but sayang la.. the confirm one is i'm continuing my build with rigid tubing.. Someone poison me and i agree with him.. Ordering some rigid tubing now and will wait for it to come. For now i'm still waiting for my sleeves and few more parts which will go on sale. I'm also poisoned by the beauty of rigid tubing but think about the skills needed to bend the tube i'm not dare to proceed
|
|
|
|
TSGrimmm
|
Feb 2 2015, 09:21 PM
|
Getting Started
|
QUOTE(llk @ Feb 2 2015, 09:20 PM) I'm also poisoned by the beauty of rigid tubing but think about the skills needed to bend the tube i'm not dare to proceed i word dude PETG.
|
|
|
|
owikh84
|
Feb 15 2015, 11:25 PM
|
i7 Clan
|
QUOTE(Grimmm @ Feb 2 2015, 09:19 PM) you ask me before did i always stay on my OC settings 24/7 and i said yes.. becasue the normal load showing below temp. Not air conditioning room.. use fan only Awesome rig bro. Btw, your RealTemp screen looks incorrect. By rights the 5930K should have TJmax of 105c instead of 90c that's recorded in your picture. You should asjust the TJmax in the RealTemp's setting. Furthermore, you should use RealTemp "TI" edition to monitor all the 6 cores instead of the normal ed which is limited to quad core only. Alternative temp monitoring app is CoreTemp, but this one doesn't report date & time.
|
|
|
|
TSGrimmm
|
Feb 16 2015, 08:22 PM
|
Getting Started
|
QUOTE(owikh84 @ Feb 15 2015, 11:25 PM) Awesome rig bro. Btw, your RealTemp screen looks incorrect. By rights the 5930K should have TJmax of 105c instead of 90c that's recorded in your picture. You should asjust the TJmax in the RealTemp's setting. Furthermore, you should use RealTemp "TI" edition to monitor all the 6 cores instead of the normal ed which is limited to quad core only. Alternative temp monitoring app is CoreTemp, but this one doesn't report date & time. Thanks for the hand bro. will find the ti version. At the moment im changing to rigid tubing. Just finish and will start to post some picture
|
|
|
|
TSGrimmm
|
Feb 16 2015, 09:23 PM
|
Getting Started
|
Hey Friends Im continuing the build with rigid tubing and im done basicly just waiting for my sleeve to complete. Just sharing few picture of my rigid build some modification to the case and parts. I have remove the phantek logo to let room for my 360 rad to be in the bottom and change the upper rads to quad rx480 from xspc Leak test been done so far up till now (36hours) everything is very good will post some more picture when it is done
|
|
|
|
buyoq
|
Feb 16 2015, 10:25 PM
|
|
QUOTE(Grimmm @ Feb 16 2015, 09:23 PM) Hey Friends Im continuing the build with rigid tubing and im done basicly just waiting for my sleeve to complete. Just sharing few picture of my rigid build some modification to the case and parts. I have remove the phantek logo to let room for my 360 rad to be in the bottom and change the upper rads to quad rx480 from xspc Leak test been done so far up till now (36hours) everything is very good will post some more picture when it is done nice.tomorrow can buy a new blanket at Jaya Mall
|
|
|
|
azilazwa
|
Feb 17 2015, 01:59 PM
|
|
QUOTE(Grimmm @ Feb 16 2015, 09:23 PM) Hey Friends Im continuing the build with rigid tubing and im done basicly just waiting for my sleeve to complete. Just sharing few picture of my rigid build » Click to show Spoiler - click again to hide... « some modification to the case and parts. I have remove the phantek logo to let room for my 360 rad to be in the bottom and change the upper rads to quad rx480 from xspc Leak test been done so far up till now (36hours) everything is very good will post some more picture when it is done How's the temp bro? Changing from 240mm alphacool monsta rad to XSPC RX480mm rad? QUOTE(buyoq @ Feb 16 2015, 10:25 PM) nice.tomorrow can buy a new blanket at Jaya Mall buy blanket for what bro?
|
|
|
|
TSGrimmm
|
Feb 17 2015, 04:31 PM
|
Getting Started
|
Temp is better a bit. When idle it is around 32 which is higher than previous but full load doesnt exceed 60.. Might be some air buble inside the rad
|
|
|
|
TSGrimmm
|
Feb 20 2015, 10:35 AM
|
Getting Started
|
Just about to say complete the new EK FB R5E single block for mosfet, cpu and x99 chipset. Just purchase it and waiting for it to arrive. Changing the loop again
|
|
|
|
azilazwa
|
Feb 20 2015, 08:06 PM
|
|
QUOTE(Grimmm @ Feb 20 2015, 10:35 AM) Just about to say complete the new EK FB R5E single block for mosfet, cpu and x99 chipset. Just purchase it and waiting for it to arrive. Changing the loop again U bought new block for the mobo or changing mobo? Changing loop again rajin btol ko nih bro. hahaha
|
|
|
|
TSGrimmm
|
Feb 20 2015, 08:09 PM
|
Getting Started
|
QUOTE(azilazwa @ Feb 20 2015, 08:06 PM) U bought new block for the mobo or changing mobo? Changing loop again rajin btol ko nih bro. hahaha Hehe.. yup.. the new R5E full mobo block is one piece for mosfet, cpu and x99 chipset
|
|
|
|
buyoq
|
Feb 20 2015, 08:57 PM
|
|
QUOTE(azilazwa @ Feb 20 2015, 08:06 PM) U bought new block for the mobo or changing mobo? Changing loop again rajin btol ko nih bro. hahaha byk duit xde hal laa hahah
|
|
|
|
azilazwa
|
Feb 20 2015, 09:21 PM
|
|
QUOTE(buyoq @ Feb 20 2015, 08:57 PM) byk duit xde hal laa hahah btol dah tu bro. hahaha. bro Grimmm, nanti spam pics byk sket. kasi drooll
|
|
|
|
TSGrimmm
|
Mar 5 2015, 09:39 PM
|
Getting Started
|
Heya guys Continuing my build, i just finish installing and leak test and everything turns up fine. So i added few stuff also like the FC link bridge, mncptech fan grill and using Mayhem pastel ice white. Below are the update Just cant get the EK CSQ version this look dull a bit Leak Test Still waiting for my sleeve and budget to get the fan grill from mncptech 3d overkill version. Will post picture and still doing some testing as my temp iis jumping all over the place i need to re OC it.
|
|
|
|
BuckRoger
|
Mar 6 2015, 09:46 AM
|
|
is that OD 12mm rigid tubing??
|
|
|
|
TSGrimmm
|
Mar 6 2015, 08:24 PM
|
Getting Started
|
QUOTE(BuckRoger @ Mar 6 2015, 09:46 AM) is that OD 12mm rigid tubing?? 10mm ID 13mm OD bro.
|
|
|
|
hafdin
|
Mar 7 2015, 02:22 AM
|
Getting Started
|
wow. the rigid tubing is much better. but why didn't you go with alphacool 480 nexxxos monsta rads at the bottom? i think it'll look much awesome
|
|
|
|
TSGrimmm
|
Mar 7 2015, 08:58 AM
|
Getting Started
|
QUOTE(hafdin @ Mar 7 2015, 02:22 AM) wow. the rigid tubing is much better. but why didn't you go with alphacool 480 nexxxos monsta rads at the bottom? i think it'll look much awesome Out of stock at most places. Planning to change the upper rad to ut60 nexxos and the bottom to 480 nexxos but still thinking where should i install the drain port. Yup that will be awesome. Compliment also to ur build i saw it was very nice.
|
|
|
|