DFI Nforce 4+ AMD3200+ cant overclock > 2.2ghz, Need help!!!
|
|
 Sep 29 2006, 03:43 PM, updated 20y ago
Show posts by this member only | Post
#1
|
 
Junior Member
264 posts Joined: Jan 2003 
|
I hv AMD 3200+ Winchesther and Corsair VS 512MBx2 with DFI ultra Nforce 4 with (704-2BTA) bios.
Now i am running at 220*10, but if i set it higher a bit lets say 230*10 or some diffent multplier chich make it highe than 2.2ghz, my system wont boot after loading the DFI logo. Just wondering is it because i am using normal RAM caused me can't overclock it higher. Sifu out there plz help me Thank you |
|
|
|
|
|
Sep 29 2006, 03:48 PM
Show posts by this member only | Post
#2
|
Senior Member
4,667 posts Joined: Jan 2005 From: UniVeRSiTy Of MaLaYa  
|
Your corsair value select got no problem to run at 240Mhz at 2.5-3-3-8. Have you check ur temperature..?? smart guardian tool will help you
|
|
|
Sep 29 2006, 03:50 PM
Show posts by this member only | Post
#3
|
Senior Member
8,523 posts Joined: Jan 2003 From: The Jungle Of Pahang
|
Try lowering ur HTT multiplier or speed.... It could b a case of too high HTT bus...
|
|
|
Sep 29 2006, 04:00 PM
Show posts by this member only | Post
#4
|
Senior Member
955 posts Joined: Jan 2003 From: Ipoh/MMU Melaka/MMU Cyber<->Puchong 
|
Delta 450W PS
is it a good PSU ? |
|
|
Sep 29 2006, 04:58 PM
Show posts by this member only | Post
#5
|
 
VIP
15,903 posts Joined: Jan 2003 From: Miri 
|
it could be not enough voltage.... don't compare Winchester with Venice or Orleans which is more overclockable.
|
|
|
Sep 29 2006, 05:02 PM
Show posts by this member only | Post
#6
|
|
Junior Member
264 posts Joined: Jan 2003
|
QUOTE(Mcrae @ Sep 29 2006, 04:00 PM) Delta 450W PS not really sure, Robyncom recommend me last time when i bough my whole set pc. He told me this is a very realiable true power supply.is it a good PSU ?  my idle temperature for processor is around 26c when full load is 35c. Dont think so it is the teperature i try set my HTT bus lower. Report to u guys soon. Thanks for some guide any way |
|
|
|
|
|
Sep 30 2006, 03:35 AM
Show posts by this member only | Post
#7
|
Senior Member
660 posts Joined: Apr 2005
|
QUOTE(bulibulizaimon @ Sep 29 2006, 03:48 PM) Your corsair value select got no problem to run at 240Mhz at 2.5-3-3-8. Have you check ur temperature..?? smart guardian tool will help you sure bo?? last time my corsair value select ram run at 220mhz 3.3.3.8 also can't le..  |
|
|
Oct 1 2006, 04:29 AM
Show posts by this member only | Post
#8
|
Senior Member
3,726 posts Joined: Sep 2005
|
how bout ur LDT??? try to lower it down~~
Chow. |
|
|
Oct 1 2006, 06:32 PM
Show posts by this member only | Post
#9
|
Junior Member
12 posts Joined: Oct 2006
|
a)have you increase your vcore? b)try to disable dfi logo to see the error c)try use 1 slot of RAM d)play with mem latency.last time my CPU can go up to 2.8G but only the CPU temp is limiting higher speed.right now my CPU is running at 2.4G with mem 2.5-3-3-8.im using kingston 512mb with a nanya chip.hahaha.funny name.its a lousy RAM though.
 |
|
|
Oct 17 2006, 10:50 AM
|
Senior Member
614 posts Joined: Jun 2005 From: ლ(ಠ益ಠლ)
|
im having the same CPU,
3200+ winchester A8N-Sli deluxe 512mb DDR CPU max stable @ 223~224x10 / 2230mhz under 1.4v increasing the vcore will help but i dare not to increase the voltage coz takut , this year has been a bad year for me , everything keeps getting damaged . |
|
|
Oct 17 2006, 03:37 PM
|
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
1.5V is safe enough for 90nm AMD processors.
|
|
|
Oct 21 2006, 12:41 PM
|
|
Senior Member
4,667 posts Joined: Jan 2005 From: UniVeRSiTy Of MaLaYa
|
QUOTE(Guriseruda @ Sep 30 2006, 03:35 AM) sure bo?? last time my corsair value select ram run at 220mhz 3.3.3.8 also can't le.. Im very2 sure this VS RAM can go to that speed coz my last rig using this RAM.. but was let go already  Now using TwinMOS Speed Premium and can go 270Mhz at 2-2-2-5 |
| Change to: |  0.0155sec
 0.35
 5 queries
 GZIP Disabled
Time is now: 29th November 2025 - 07:44 AM |
Quote