anyone have an idea to setup the fish aquarium pump to use as a custom WC? i decided to modify my old aquarium pump into a home made WC..no money to buy the WC..but got an idea to make it by ownself..creative...huhu. Any idea? 

nirox p2800 can used with some modding, i use it before... but now running laing d5...

Chect this out..selfmade WC..i think he use a aquarium pump and a car radiator..isn't it? i guest so..huu.

http://forums.extremeoverclocking.com/atta...05&d=1082259609

i dont think so..if the modder seal it up,the air from the fan is not strong enough to reach the radiator..instead,he must us stand fan to do that.. huhu..

erm... must have been a while since i have been thru this thread...

anyways,

Now / currently i am running on Nirox P2800 , El cheapo pump. Not Bad. ( noise erm... i dunt think there is ) , Heat ( a bit warm ) a small 80mm / 60mm fan would do the job.

In My Case, The Pump is inside my casing so i have the case fan to cool down the pump's heat. been using it for a while
Before this i used a a really cheap aquarium pump, submerged it in a cookie jar and made some connector on top. the only problem to that was the heat dumped into the water. If u can get a bigger jar + better radiator, i guess the heat dumped by the pump would not be a problem.

Hope That Helps.

As For Radiator.

Try scavenging for a DAIHATSU MIRA / CHARADE Heatercore.

This 2 stuffs would do the trick.
gOod LuCK

car junkyard?

if diy also cost 300-400 why not buying a  Thermaltake Big Water SE ..isn't it cheaper and nicer ?