Skyreach 4 mini
https://nfc-systems.com/skyreach-4-mini

Velka 3
https://www.velkase.com/products/velka-3

These are the 2 smallest I can think off that uses flex

I was thinking any Taobao alternative/clone?

try to look for SGPC K39

it is somewhat similar to the Velka 3

Well I found this case.

Case + 150W pico psu for RM372

Any opinion on pico psu?

wow very nice idea using the mobo 24pin as a cover too never seen it used like that Nice!
What GPU you're using in this build and hows the temps?

Also anyone know any reliable source to get case feet for itx cases? My SGPC feet were taken/stolen by kastam
Need a replacement

For those that want a minimalist wifi antenna and dont like the obnoxious shark fin that comes with the board, read on

These arrived from Taobao today:


Tested all of them against a wired connection. I found that among the antennas, the 90 degree ones were much better than the straight ones for wifi connectivity.


In the end chose to use this one


Main purpose is to boost BT signals though, and all of them functioned well.
Now I can use the PS4 controller while playing on the PC at a longer distance.

Taobao links for those interested

Yeah, a lot of users have that case because of the low price.
You can do a search to take a look at the different specs and builds.

Here's mine

Specs:

Thermals:
CPU: Idle - 45°C, load - 70°C (undervolted PPT 75W)
GPU: Idle - 35°C, load - 70°C (not yet undervolted)

Pictures:

hahaha that idea came out of nowhere, as I was putting everything together

I'm currently having Galax RTX 2060 in my build. as for temps I'd say typical air cooled range, hovering around 70 for average games and can go up to 80 if demanding ones like CoD Warzone and Division 2

hows the fan noise on this?

CPU fan and GPU fan are quiet, I've undervolted to reduce thermals. I'm using a noctua 90mm fan for the CPU cooler.

PSU fan is silent. Usually people swap out with noctua 40mm fans because theirs is loud. Mine isn't.

The PCH fan is the loudest fan in the build. Need to update bios to get the option of controlling the fan speed.

nice! i went with the K55 because worried about the 1U flex PSU sound. If I saw your post earlier might have gone with K35 instead its much smaller than the K55. Nice silver plated cables too! It definitely helps for cable management in such cases eh? ^^

Building in this case was a breeze, and the cables definitely helped. I usually spend too much time getting cable management right and didn't have to fuss too much about this build.

Id say that the k55 is a better option if you're looking for GPUs other than the 1660TI. There weren't many sub 180mm GPUs on sale when I was putting mine together. I believe I bought the last brand new 2070 mini in the country, most of the mini itx cards are the 1660 series.

Yikes


Corsair recall sfx psu

fuh mine just a bit below the batch number

____________________________________________________

MY PKP Built
all item sourced out of shoppe and lazada.
damage 5k

spec


low 45 high 75 Celsius (still stock on balance amd ryzen power plan)
corsair vengeance kit cannot use default xmp profile with the aorus mobo, blue screen
default xmp profile 16 18 18 36 54
working profile 16 18 18 36 56
found it in gigabyte forum
update to bios 51d
cable still need work

any one ordered anything from Mod-One ?

pictures


This post has been edited by mousqy: Jun 15 2020, 12:18 PM

Anyone here tried upgrading the network card in their B450 ITX boards to AX200?

Does it void the warranty?

anybody used jonsbo v4 here?
i wanna know what aftermarket coolers are you all using for the processor

https://thor-zone.com/mini-itx/

You can now pre-order Mjolnir, slated for September release.

Base config is US299.



This post has been edited by Current Events guy: Jun 10 2020, 06:52 AM

Cooler master making yet another ITX case, looks like the NCASE M1







more pics:

https://imgur.com/a/jIsLMpq#cyFkQYp



This post has been edited by Current Events guy: Jun 10 2020, 06:41 AM

Another taobao find. Happy Watercooling box L
still waiting for some parts to arrive to do a fully proper cable management.