better u get a 1tb sx8200

casing dont cheapen out.. thats my advice..get something alu .. jonsbo.. phantek evolv shift etc..

Yo wassap guys, trying to find a better case and cooling. Right now am using Node 202 with an 2600 with the stock cooler, now my gpu is nice and cool but it's abit loud with the cooler master pwm fans I'm using as an intake.

I'm trying to buy a new case and cooler and new fans as well I guess for a quieter and abit cooler processor temps.

Current idle temps for proc is 48-50c, GPU idle is 38-40c

Was eyeing RVZ03 but somehow nobody carries them anymore.

Kinda, to be honest as long as I can chuck it in my luggage and I can good temps I'm fine with it.

Oh I don't care about showing off internals, I was looking at the Greek A50 is that any good? Or should I just get a ML08 from a friend of mine since he's not using it anymore. The reason why I was looking into the RVZ03 is because it can fit 83 mm or below cpu cooler.

I was thinking any Taobao alternative/clone?

wow very nice idea using the mobo 24pin as a cover too never seen it used like that Nice!
What GPU you're using in this build and hows the temps?

a question, most of the small form factor nowadays are able to house 2070/2080?

Like the Apple inspired design hows the thermal on this looks nice

Hello! New recruit to the SFF MY scene (enlisted during the MCO).




-  Ryzen 5 3600
-  Gigabyte Aorus B450i Gaming Wifi
-  Crucial 1TB NVMe PCIe M.2
-  Samsung 860 EVO 250GB SATA
-  GALAX GeForce GTX 1660 Super EX White 6GB GDDR6
-  2 x G.SKILL Aegis 8GB DDR4 3200MHz CL16
-  FSP DAGGER PRO 650W 80+ Gold SFX Full Modular PSU
-  2 x NOCTUA NF-F12
-  NOCTUA NF-A12x15
-  Castle 240EX AIO

For those familiar with this case, thermals will always be a challenge with glass side panels. CPU idle temps are around 45C and around 80 at full load. GPU sits at 40C when idle, and tops out at around 80C as well at 100% load.

Plan will be to do some undervolting this week to see if temps can be brought down further.

[Edited for brevity and forum etiquette].

The challenge of working with 7nm architecture! I can reach 35 idle temps by switching off Core Performance Boost (or "turbo") in BIOS, but I think i can survive with sub 40C for now. Forgot to add that the 80C temp is when I stress test the CPU with Prime95 and load all cores at 100%. With games, it's around 60C maybe?

Just fan no aircon either.

Are there many Ophion Evo case users in MY? Don't think it's particularly popular here. I am already itching to switch to another case haha.

I see. After spending weeks going through Shopee and Lazada, this was the only case that really caught my eye. Only when I went deeper into the hole, then I realized there are so many more cases out there. 

Now I can't stop planning for my next build.

Aw man, I am, and I am addicted! Worse than pron!

I am lusting at the ghost s1 clones like kevcase, formula x1 and wdean, others like aklla, sunmilo, seadamaged, the thor clone etc.

Surely i am not the only one right? 

Hah! I might have to uninstall the Taobao app from my phone, I have only used my current setup since May and already I want to change (1) the case (2) the gpu and (3) my monitor!.

I might spring for the FormD T1 though, it's just too good.

Have you bought cases on Taobao direct? How was your experience?

https://www.coolermaster.com/catalog/cases/...asterbox-nr200/

time to update your budget itx builds from sg13 or qbx to this $80 - 100 case

coolermaster is going to sell a lot of this.

Thanks for replying. Not willing to let go my baby 1080. looks like sg13 is the way.

any1 have experience with those china taiwan GEEEK cases? looks dandy, but not many youtuber review.

Anyone know if the NR200p comes with vented side panel or tempered glass panel or both?

Will be building my first itx rig soon

Aiming at Jonsbo A4 and would prefer a air-cooled rig
Would that be a concern for temperature when comes to gaming ?

It will be placed at non ac area, i would have a table fan blowing straight at the front of the rig.