SilverStone has a lots of 150mm length PSU.

guy...recomended me itx case that can fix 1ssd and 2 hdd..
budget around 200-300... thx

Give SilverStone ITX case a try.

U may try Coolermaster Elite 110, I am using that, 1 SSD, 1 x 2.5" HDD and 2 x 3.5" HDD

Hi guys! Planning to build a mini ITX PC when I get home from the UK for a summer break. Quite excited!

Anyway, after some reading I found the Silverstone SG13 and Fractal design node 202 to be the smallest cases available. Any other recommendations?

What benefit do I have if I use the Sapphire R9 380 2GB GDDR5 ITX OC (ITX card) with these cases?

Need some opinions about my upcoming SFF HTPC/Gaming build.

I have E31290v2(junk bought from taobao), Asus H77I (itx mb).

As for the casing, I didn't make up my mind to choose a itx casing which can fit in 980ti, 1 3.5" HDD & 1 SSD.

I am eyeing on Silverstone ML07b & FTZ01. Those casing design are quite similar.

I could use forumers' opinions... which is the better.

Thanks.

Hey, I have a NODE 202 mini itx build and I'm looking for an upgrade of my GPU but I'm terribly afraid It wouldn't fit in my case.

can the Palit Dual Fan 1070 fit in it?

when go for SFF. the price can be very expensive, and a little bit of customization.
this is my current build.

https://forum.lowyat.net/index.php?showtopi...&#entry74417249

still love it after years. time to change the GPU. but less gaming now a days.

for your infomation, if you guys be able to shop at other places like TB. u can get a very nice customize casing. full alu.
some suggestion link
https://sunmilo.taobao.com/index.htm?spm=20...348908.2.aUUUjg

Hi,recomended me cheap mitx horiontal type which can put normal psu

cooler master elite 130

raijintek metis or raidmax atomic anyone got stock?

Hi all, is there any SFF case with small footprint that is fit for an ATX motherboard? I need to replace my current BIG mid-tower case.
It will be good if the case with 350mm ~ 400mm DEPTH. I don't care the HEIGHT / WIDTH.
I found that Lian Li PC-V33 is suiting my requirement.
Give me some opinion on it and PM me the best price if you selling them.

https://www.pcper.com/news/Cases-and-Coolin...-Cube-Enclosure
https://www.youtube.com/watch?v=3gWbLE0BUlI

THANKS

Anybody selling. NCASE HERE??

jakken214 i thinking of selling mine

NCASE M1 v4 Black (No ODD Slot)

full retail box, brand new, open box, never use before

price PM me

I'm using ml07b for 3years already. No prob so far. Like the slim look.

However these are the pros and cons that i can think of

Pros:
Slim and small foorprint
Can fit regular sized graphic card but got length limit
No overheating issue. The case has great cooling. I use noctua fans and scythe cpu heatsinks.
Can fit laptop cd rom, 3ssd, 1 hdd.

Cons:
Expensive for a bare case - no psu, fans, dust filter bundled.
Uses sfx psu, limited choices
Stiff power button, reset button. Hard to press.
Plastic build
My gpu runs hotter when lying horizontally. Gpu will face down and cause insufficient airflow. I keep it vertical at all times for now.
Cpu heatsink need to check for height clearance as it may not fit the slim case.

Where to find small case like this at KL/Selangor? Have anyone see it @ Lowyat?

Would you guys recommend a SFF system for an uni student? Thanks

Get a notebook, better

Alright, thanks for the info

this thread quite silent

just completed an SFF build recently using Fractal Design Node 202, spec as follows:

- Node 202 case + 450W Integra PSU
- Intel Core i5-6500
- Asus H110i-Plus
- Corsair Vengeance LPX 8GB DDR4 x1 (planned to add another 8GB stick later)
- EVGA GTX1060 3GB ACX 2.0
- Kingston UV400 120GB SSD as boot drive
- HGST 1TB 7200rpm 2.5" HDD for storage
- 2x Thermaltake Riing LED 120mm SP fans for intake

replacement rig for my recently sold Alienware X51 R2, after quite some time finally decided to go all-out custom PC for better upgrade route