Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 [FAQ] PC auto restart/Blue Screen (BSOD), All questions go here please.

views
     
lighter
post Sep 5 2008, 12:00 AM

Recommended Seller
*******
Senior Member
2,478 posts

Joined: Jan 2003
QUOTE(lordnirrajim @ Aug 29 2008, 04:26 PM)
Hallo all sifu in LY.net. I have a problem with my pc here. Cannot acces win xp and keep restart. Tried to boot using cd, a stop error appears. Below is the stop error:

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this the first time you've seen this stop error screen, restart our computer. If this screen appears again, follow these steps.

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /f to check for hard drive corruption and then restart your computer.

Technical information:

*** STOP: 0x0000007B (0xF78D2524, 0xc0000034, 0x0000000, 0x0000000)

Please help me since I'm a newby in this IT thingy. My PC was a ACER ASPIRE M1641. Bought directly from ACER. All CD that given is the original one. Thanx in advance.
*
STOP: 0x0000007B
INACCESSIBLE_BOOT_DEVICE
This Stop error indicates that Windows XP has lost access to the system partition or boot volume during the startup process. Installing incorrect device drivers when installing or upgrading storage adapter hardware typically causes this Stop error. This error could also indicate a possible virus infection.


I already mentioned on my first post in this thread.
lighter
post Oct 4 2008, 05:53 AM

Recommended Seller
*******
Senior Member
2,478 posts

Joined: Jan 2003
QUOTE(coldfusionpower @ Oct 4 2008, 02:11 AM)
got this since i change mobo,SLI gc and SATA DVD ...and cloned the hdd. update all the drivers still like that .. happends ocasionally only .. just now . happened two times while i was working on Macromedia Dreamweaver.
*
QUOTE
Unable to load image atkosdmini.dll, Win32 error 2
*** WARNING: Unable to verify timestamp for atkosdmini.dll
*** ERROR: Module load completed but symbols could not be loaded for atkosdmini.dll
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000000A, {16, 1c, 0, 804f9f6a}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*** WARNING: Unable to verify timestamp for atkdisp.dll
*** ERROR: Module load completed but symbols could not be loaded for atkdisp.dll
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
*** WARNING: Unable to verify timestamp for dxg.sys
*** ERROR: Module load completed but symbols could not be loaded for dxg.sys
Probably caused by : atkosdmini.dll ( atkosdmini+1370 )


Did you uninstall all of your driver before cloning? If you're still able to load into windows there still a chance for you to reinstall your Graphic Card Driver & Motherboard CHipset driver.

Make sure you fully uninstall your old motherboard chipset driver before installing new driver.

Hope it helps..

Added on October 4, 2008, 6:04 am
QUOTE(luvjim @ Sep 23 2008, 12:28 PM)
hi, not sure whether anyone have posted regarding this Kaspersky problem anot..
but jz for sharing...
last week my windows vista BSOD also...after figuring it out...it is the latest kaspersky problem..

solution:
try boot ur pc in safe mode with networking... and update again Kaspersky antivirus...
then reboot ur pc in normal mode..it should working fine...

kaspersky team already know this bug and have solve this problem...
*
Another way to solve the problem you can uncheck "Update application modules" under "Update Settings" and continue run the updates.

This applies to:

Kaspersky Internet Security (Workstation)
Kaspersky Anti-Virus (WOrkstation)
Kaspersky BusinessSpace Security/OpenSpace (Workstation/Server Based)

Installed into:

Microsoft Windows Vista (All version & Service Pack)
Microsoft Windows Server 2008 Standard Edition
Microsoft Windows Small Business Server 2008

This post has been edited by lighter: Oct 4 2008, 06:04 AM
lighter
post Oct 4 2008, 05:01 PM

Recommended Seller
*******
Senior Member
2,478 posts

Joined: Jan 2003
QUOTE(coldfusionpower @ Oct 4 2008, 02:31 PM)
how to uninstall old drivers ?
*
How to uninstall old drivers?

Full instruction here

http://nvidia.custhelp.com/cgi-bin/nvidia....li=&p_topview=1
lighter
post Dec 29 2008, 04:35 PM

Recommended Seller
*******
Senior Member
2,478 posts

Joined: Jan 2003
QUOTE(BaeM @ Dec 28 2008, 07:23 AM)
hye bro...

i hv prob here..
sometimes, when i play dota, half game, my pc will blue screen and then restart..
can help me?  notworthy.gif  notworthy.gif

here is my minidump --> [attachmentid=736153]
*
Your minidump files indicate that possible could be due to your Realtek HD Audio driver issue.

CODE

*** WARNING: Unable to verify timestamp for RtkHDAud.sys
*** ERROR: Module load completed but symbols could not be loaded for RtkHDAud.sys
Probably caused by : RtkHDAud.sys ( RtkHDAud+6ad9b )


You may try to update to latest driver version.
lighter
post Jan 7 2009, 05:27 PM

Recommended Seller
*******
Senior Member
2,478 posts

Joined: Jan 2003
QUOTE(ckyned @ Jan 6 2009, 01:11 PM)
Mini010509-01.dmp
CODE
BugCheck FE, {5, 873dd0e0, 10330035, 87026f90}

Probably caused by : ntoskrnl.exe ( nt+5c80e )

BUGCODE_USB_DRIVER (fe)


Few suggestions below,

1. Clear or reset your system pagefile.
2. Uninstall / disable / unplug USB device or drivers like external hard disk, webcam, etc.

You may want to upload more minidump for a better understanding of your problem.
*

How to clear or reset the pagefile? I'm not using external hard disk, webcam, etc. at that time just the USB mouse and the PCMCIA card (Sierra Wireless Aircard 875)

Here's 2 other minidump I just got: [attachmentid=749437]
Thank you.
*
CODE

Mini010609-01.dmp
Mini010609-02.dmp

*** WARNING: Unable to verify timestamp for usbohci.sys
*** ERROR: Module load completed but symbols could not be loaded for usbohci.sys
*** WARNING: Unable to verify timestamp for usbhub.sys
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
*** WARNING: Unable to verify timestamp for swumx20.sys
*** ERROR: Module load completed but symbols could not be loaded for swumx20.sys

Probably caused by : usbohci.sys ( usbohci+18fd )


These 2 dump files indicate you have driver issue with your Sierra Wireless Aircard 875. Are you using Dell notebook?

May be you can try to update your driver to latest update or reinstall the driver.


QUOTE(cheerioet @ Jan 7 2009, 10:54 AM)
Bro, how to recreate system page file? need to enter thru which kinda programme? when start up press f8 ? thanks..i really have no idea.
*
Please follow the instruction below how to clear paging file.

1. Right click My Computer or Computer for Vista --> Go to Properties

2. Go to Advanced tab (For Vista click on Advanced system settings) --> under Performance click on Settings button --> Select Advanced tab again --> under Virtual Memory click on Change button

3. For Windows XP
- Select C: drive and select No paging file --> click Set button --> OK and restart your PC

For Windows Vista
- Uncheck Automatically manage paging file size for all drives
- Select No paging file --> click on Set button --> OK and restart

4. After system restarts, repeat Step 1 and 2 and continue Step 5

5. For Windows XP
- Select C: drive and select Custom size: --> for Initial size (MB): should be X1.5 of your RAM capacity and Maximum size (MB): should be X3 of your RAM capacity.
- After done click on Set button --> OK and restart your PC

For Windows Vista
- Check Automatically manage paging file size for all drives --> OK and restart your PC

Hope it helps.


tthm: hope i'm note interrupting you..

This post has been edited by lighter: Jan 7 2009, 05:59 PM
lighter
post Jan 7 2009, 10:46 PM

Recommended Seller
*******
Senior Member
2,478 posts

Joined: Jan 2003
QUOTE(soulmad @ Jan 7 2009, 07:09 PM)
BCCode : 1000008e    BCP1 : 80000004    BCP2 : 806ECAE1    BCP3 : 905505AC
BCP4 : 00000000    OSVer : 5_1_2600    SP : 3_0    Product : 256_1

Hi i got blue screen
laptop is hot
not sure is hot or driver

PLEASE HELP ME!!!
cry.gif
*
CODE

*** WARNING: Unable to verify timestamp for pci.sys
*** ERROR: Module load completed but symbols could not be loaded for pci.sys
*** WARNING: Unable to verify timestamp for VIDEOPRT.SYS
*** ERROR: Module load completed but symbols could not be loaded for VIDEOPRT.SYS
*** WARNING: Unable to verify timestamp for igxpmp32.sys
*** ERROR: Module load completed but symbols could not be loaded for igxpmp32.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : pci.sys ( pci+ae0 )


Could be due to graphic driver or overheating issue.

Can you please try to uninstall the graphic card and install the latest driver. If you're unable to find the latest driver please provide us your notebook brand and model.
lighter
post Jan 21 2009, 09:38 PM

Recommended Seller
*******
Senior Member
2,478 posts

Joined: Jan 2003
QUOTE(cheerioet @ Jan 16 2009, 06:44 PM)
Erm...even after I reformat my OS, I still have bsod error...da blue screen becoming very annoying. Here is my minidump. any sifus can lend me some help? thanks.
*
CODE

Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe


This BSoD is very common issue. Possible caused by memory issue.

Refer to my previous thread how to recycle your paging file.
http://forum.lowyat.net/index.php?showtopi...post&p=22791995

If it still happen please run MemTest86.

Added on January 21, 2009, 9:47 pm
QUOTE(motherboard_barai @ Jan 16 2009, 03:02 PM)
i have problem with my laptop dvdrom.. it just can detect certain dvd...Y it's happen??

Added on January 16, 2009, 3:03 pmi have problem with my laptop dvdrom.. it just can detect certain dvd...Y it's happen??
*
Dude. This is BSoD thread. You may seek for help in Hardware section. nod.gif


QUOTE(evilhomura89 @ Jan 20 2009, 11:12 AM)
[attachmentid=771183]
here my minidump...can anyone help me check wat's wrong with it?

thanks.
*
CODE

BugCheck FC, {20205, 4f1847, 8c524a54, 0}

*** WARNING: Unable to verify timestamp for ndis.sys
*** ERROR: Module load completed but symbols could not be loaded for ndis.sys
*** WARNING: Unable to verify timestamp for pacer.sys
*** ERROR: Module load completed but symbols could not be loaded for pacer.sys
*** WARNING: Unable to verify timestamp for cfosspeed.sys
*** ERROR: Module load completed but symbols could not be loaded for cfosspeed.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.

Probably caused by : pacer.sys ( pacer+59b8 )


Possible your PC infected with Malware. You may create a new topic in Technical Support section seek for Malware pro for help

Added on January 21, 2009, 9:49 pm
QUOTE(motherboard_barai @ Jan 21 2009, 02:44 PM)
actually what is blue screen?this happen from what??
*
Pleaes read first 3 posts in this topic or here. thumbup.gif

This post has been edited by lighter: Jan 21 2009, 09:49 PM
lighter
post Jan 31 2009, 08:52 PM

Recommended Seller
*******
Senior Member
2,478 posts

Joined: Jan 2003
QUOTE(Nickism @ Jan 30 2009, 06:38 PM)
The blue screen appears again for few times  sad.gif
this is the latest minidump file...
Post this so that when u guys help me can compare both minidump files if needed..
icon_question.gif Ps:i m ahlim(ignore it if u dunno wad it mean)
*
CODE

Unable to load image nvmcp.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvmcp.sys
*** ERROR: Module load completed but symbols could not be loaded for nvmcp.sys
Probably caused by : nvmcp.sys ( nvmcp+5bb03 )


hi ahlim,

It seems your system crashed was due to motherboard (nForce2) driver issue.

You may download latest version of your motherboard driver at www.abit.com.tw. As I'm unable to find the driver for you because recently they having a problem with their download page.

What you can do now you can try to install Windows XP Serviec Pack 3 first.

Good luck and Happy chinese new year!

Abit NF7-M drivers

This post has been edited by lighter: Feb 2 2009, 06:58 PM
« Next Oldest · Technical Support · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0665sec    0.81    7 queries    GZIP Disabled
Time is now: 29th November 2025 - 09:22 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.