HT link more than 1000mhz is it ok?
btw mine using micron technology pc2100 rams..290 mhz*9 at 1.45Vcore, my memory clock setting at 133mhz and ddr running at 189*2@2.8v 2.5-2-2-5..are my setting going to kill something on my system? but i ran prime95 up to 11hrs with no errors..idle i got 37c and full load at 53c..if i wanna go higher..i have to change better clocking rams? or i can run with 100mhz memory and increase more v core to get more HTT?i think my rams are running waaay over the rated speed..even a cap ayam summore..i'll post some screenies tomorrow..

This post has been edited by turbo10: Oct 5 2006, 03:35 PM

thanx bro for the advice..now i got the idea..i'm really new in overclocking and learning from u guys and tips in the LYN..it really helps a lot.btw i managed to get only 2.6ghz by running 133mhz devider..my finding was memory clock effects the super pi results, and my results seems better then when i was running 100mhz devider..i know u guys knew that already..for a noobie like me,it was a practical approach to overclocking...heheh ..so i need a gooder ram to replace my lousy outdated pc2100 ram..one more thing..do the ram size improves 3dmarks benching and super pi?

[img=http://img201.imageshack.us/img201/6751/pimodum1.th.jpg]

this is my setting..anything i could improve? ran this setting with prime95 for 11hrs and stopped with no errors..can it be consider as stable? i know my super pi is super slow considering i am running 2.6g..i think running with better rams could make it faster..i guess..

thanx guys for the advice..seems that need ram upgrade for me..if got some money mebbe getting a pair of ram..512x2 set from LYN garage sale..any rams u guys could suggest? but i read somewhere here in lyn that said mobo sometimes a bit choosy with rams..i dunno my mobo love what ram..so far current ram i'm using works like a gem..working waaay above its rated speed..wanna try run dual channel..see what can improve.hehe..u guys know what...90% of my rig parts and 99% help and knowledge come from the LYN..glad i found this community..

yup bro..been using single stick rite now..i am sure like what u said the headache will come if i upgrade to dual stick/ channel..but i will go for 2 sticks..u can see my rig is kinda budget one so i am going for a pair of budget rams like hynix u mentioned..TCCD might be an option if ada duit lebih..thanx for the help bro

fuiyoo..you guys got some very fast machines..i think i'll have to go for hynix..for starter like me mebbe not suitable to go for the high end tccd's..but tccd time will come..hehe..first..learn oc dual channel first..thanks sifoos

china made and mlaysian made same quality rite?coz it comes from the same company..same operation standard..same quality tolerance..just my 1 cent..hehe

that's good...before this i was running 2.6g@1.45Vcore...i tried to reduce to 1.425Vcore and it worked like a gem...primed it and all pass..for about 8hrs..previously @1.45Vcore primed till 11hrs54min without error..IMHO..although china made quality are the same or mebbe better or mebbe slightly lower but amd still got its operation standard to follow..