you should find out the max cpu speed u can get.. only then you fool around with the memory timming. To find out the max O/c cpu speed, drop your HT multi to 3 and set your memory to run at 166. Then only you try to crank your fsb to 300++..

i'm usin dfi infinty ultra... n still finding the sweet spot for my corsair ddr500..

Spec
Venice a64 3200+@ 300*8 @1.45v (max 2.7g@1.6v not stable)
512*2 Corsair XMS 4000 @2.8v



This post has been edited by nicotine: Sep 8 2006, 12:53 PM

bos ... 285*9 already 2565mhz (proc) if thats ze max stable speed u can get.. try do do some stress/burn-in test using sp2004(prime) then cross your finger and pray so that it could run above 2.5ghz after few days of prime torture.

mine- ldt voltage@1.5v stock.. i suggest you not to run over 1.6v with that chaplang stock chipset cooler.. it's damn hot ! look for some better aftermarket alternative

edit- not necessary to call me ... just visit this site n read it few time to get better understanding

http://www.dfi-street.com/forum/showthread.php?t=20823

This post has been edited by nicotine: Sep 8 2006, 06:18 PM