ive got a LBBWE 0603APBW @ a64 3000+ and so far been able to cock it to 2219MHz @ 1.45vcore, 1.66 mem divider, mem @ 208MHz (kvr d-43)
multiplier is still 9 for the venice, and its a bit hard to get it stable and my MBR keeps getting corrupted.

solutions would be?

1) lower multiplier, pump up HTT

2) play with HTT and CPU multiplier (max cpu speed, highest possible HTT and RAM speed?)

3)whack voltages then do one of the above

hmmm my mobo should have that lock...it has the nforce 4-4x chipset btw anyways, will try that out, thanks

ram timing too tight? LOL its the looooosest i have since NF2

LOL about the caps
but even then im a bit dissapointed with the nf4-4x chipset......not much options available in award bios esp for gigabyte boards =.="

my OC results, but then in BIOS i have the FSB at 302!!! darn bios might be corrupted. sheesh.

huh? which divider 140? LOL

ram is at 2/1.33 divider, rams all maxing out already....
and just completed 15++ hours of prime, so this is the most rock stable setting so far, but not the highest

huh...so kwachiong mer....LOL
prime must see wether its large or small FFTs which affects it mer....like mine if blend got probs, then i do another prime on each type of stress test, so i'll know which is the lagging part.

more POWWWWAH! add more vcore lar.

no more liao.....ATI duwan to do coz their schedule no time ahHAHAHAHAHAHA

but i tired the rig they sent..........its....powerful aahhahahaa

your rams cacatz lol

more like you push your rams too far and might experience aBSOD soon or not enough vdimm or wrong timings, not loose enough

lol a gto will never be a xt. unless you actually enable the extra 4 pipelines that is.