Outline ·
[ Standard ] ·
Linear+
AMD K8 Family Overclocking (754/939/940/AM2/1207), General discussions and newbies' guide
|
footie
|
 Sep 26 2006, 08:40 AM
|
Getting Started
|
QUOTE(sub_noob @ Sep 26 2006, 01:23 AM) Got Another prob here.. i use AMD64 tweaker.. suddenly when i change settings at bios.. it didnt follow the bios setting.. clear cmos oso the same.. Im suppose to format comp again? Tccd Vs Bh-5 Vs D-43.. which one u prefer for amd Ocing..? board does matters here. if ur on dfi lp, i wud say bh-5 & tccd are the better choice. both can do high frequency w/ d board mentioned, w/ d latter need lower voltage.  This post has been edited by footie: Sep 26 2006, 08:47 AM |
|
|
|
|
|
footie
|
Oct 6 2006, 04:47 PM
|
Getting Started
|
QUOTE(turbo10 @ Oct 6 2006, 04:42 PM) thanx guys for the advice..seems that need ram upgrade for me..if got some money mebbe getting a pair of ram..512x2 set from LYN garage sale..any rams u guys could suggest? but i read somewhere here in lyn that said mobo sometimes a bit choosy with rams..i dunno my mobo love what ram..so far current ram i'm using works like a gem..working waaay above its rated speed..wanna try run dual channel..see what can improve.hehe..u guys know what...90% of my rig parts and 99% help and knowledge come from the LYN..glad i found this community.. clockin a stick of ram is alwez easier than 2stick @ dual channel. neway, 2.6GHz w/ stock voltage is really impressive. not so familiar w/ abit board, but i suppose hynix ram will help if ur on tight budget, else, go for tccd. my 2 cents.  |
|
|
|
|
|
footie
|
Oct 6 2006, 06:47 PM
|
Getting Started
|
QUOTE(sniper69 @ Oct 6 2006, 06:45 PM) 2.6GHz@1.45vCORE? me myself clocked 2.88GHz@1.4vCORE   ,  show offactually yes, TCCD is better i must say, coz, i successfully clocked at DDR640 stable  2.6GHz @ stock voltage considered above average ledi, it's about luck sometimes to get a magical stepping... off topic: mind to share a prime stable screeny mate? superb ram u have there...  i only manage to squeeze this outa my tccd...   This post has been edited by footie: Oct 6 2006, 06:54 PM |
|
|
|
|
|
footie
|
Oct 6 2006, 09:05 PM
|
Getting Started
|
awesome chip...  i can get d ram run on 315MHz w/ same timing, but only prime stable for an hour plus...  i think 313MHz is d max, or mebe i need a chip w/ better mem. controller... |
|
|
|
|
|
footie
|
Nov 10 2006, 09:10 PM
|
Getting Started
|
QUOTE(lichyetan @ Nov 9 2006, 08:07 PM) i got weird problem for my DFI NF4 SLI expert, i seems cant reach 300fsb... it seems maxed out at 275, i using divider for my ram also wont help... it just wont boot... last time using biostar no problem touching 300fsb, wat settings did it missed out? also lower the hypertransport multiplier also wont help with 300*3 = 900 only.. vcore not enuf? heard that expert need higher voltage (if compared to others)as it's very precise in supplyin d juice while some other boards usually overvolt... |
|
|
|
|
|
footie
|
Nov 14 2006, 10:16 AM
|
Getting Started
|
QUOTE(kelv!n @ Nov 12 2006, 08:57 PM) guyz... can i ask which proc can oc better with stock vcore... opteron 144 or athlon 64x2?? BATCH is d key... @ soulfly: i alwez set RP & MA to auto, i found it useful to set 'em that way. on d other side, it's d drive strength thingy that troubles me sometimes... |
|
|
|
|
|
footie
|
Nov 14 2006, 08:52 PM
|
Getting Started
|
QUOTE(lichyetan @ Nov 14 2006, 07:11 PM) wat is this to means?? i mean wat ram suits wat ram? cause i really new to DFI bios, lol.... i cant use certain memory divider, tht's y i cant hit 300fsb... it juz wont when doing 300fsb using divider to run ddr 400... last time tforce can do it cause less memory timings,...  it wud be useful if u can provide d screeny of ya advance ram timin usin a64 tweaker... |
|
|
|
|
|
footie
|
Nov 25 2006, 04:06 PM
|
Getting Started
|
QUOTE(Vinci777 @ Nov 25 2006, 02:29 PM) oic...i guess i'll try out using my 3000+ system and my fren 3500+am2 system to see the comparison ... thanks so much guys... wish me luck  btw... am2 using ddr2 while k8 using ddr1.. using the same ghz cpu 3000+.. am2 3000+ easier to reach a more stable 1:1 because of its ddr2 rite? becoz i think its almost impossible to run 1:1 on k8 system when oc.. d most ddr can go is around 320~ish (provided u got a pair of tccd which i consider gem), any higher i think it's impossible. sometimes it's not alll bout d ram, capability of ya chip do count too... |
|
|
|
|
|
footie
|
Mar 13 2007, 08:33 AM
|
Getting Started
|
QUOTE(suicideroach @ Mar 10 2007, 03:00 PM) Is anyone using mobo asus A8R-MVP here? i've got problem when i oc wit this board... why not tell us ya problem & list out details of ya rig here? in general, d board is known to have voltage fluctuation & 1t issue for some modules...  have some read here: http://forums.vr-zone.com/showthread.php?t=53841 |
|
|
|
|
Quote
0.0173sec
0.40
7 queries
GZIP Disabled