my rig
amd64 754 2800 (2.4ghz)
mobo abit nf3
ram ddr400 1gb ct-d43
gc ati 9600xt little oc

so my timing:
3-4-4-10
333 n divider is 3
9 is max multiplier in my mobo
9 X 267 = 2.4ghz

temp:
idle system 35 n cpu 37c
full load sys. 42 n cpu 45c-48c

i can go oc to 2.5ghz but to scared if it will burn huhuhu....

si any suggestion to improve my oc..

noop
im using zalman 7000
so it is to hot..
but seems to be standards cause thats sc754 n nforce3
and my command rate is 1T

cpu 1.6v stable
ram volt 2.8v

plz help me to oc my rig
max oc reach only2.45ghz
default is 1.8ghz amd64 754
ram kingston ddr400 ct-d43

272 x 9 = 2.45ghz 9 is max multiplier
3-4-4-10 (333) 1T
my target to get 2.5ghz

to all forumer
can give some advise to oc
dis my rig

amd sc754 2800 1.8ghz (2.4ghz oc)
mobo dfi lan party ut nf3 250gb
ram ocz gold ddr400 1gb bh5 / utt bh5 if not mistaken
my timing now
ram divider 180 9/10
267 x 9
2.2.2.5 latency.....
ddr voltage 3.2v
cpu volt 1.525 110%


can u all give some advice
to oc within timing ram n divider
to get max oc for tight timing n lose timing ....
tq

bro tq
but o ready try the set of timing
get 2.6ghz 2-2-2-5
command rate use 2t
bro can give some advise for another setting..
like memory tweaking under advanced bios

eg:
manual set for memory tweak or any link

tq very much bro
so i will read n try it
tq for da big help for me...
very appreciate it