@hongchiang
i think change mobo is a waste, save tat money 4 AMD AM2 better..

my advice.. buy a good heatsink..
suggest u get d one which can oso support AM2 de (4 using in d future)

since u r using Via KT600 mobo which lack in oc
ur pci/agp clock oni can fix (at 33/66Mhz) on 100/133/166/200Mhz (fsb)

so d proper oc will b:
11 (multiplier) * 200 (fsb) = 2200Mhz
i think ur multiplier is locked, so u oni can change fsb..
2500+ default fsb is 166mhz, but it should able oc 2 200mhz (if u r lucky )..

if u success, ur proc will b detected as 3200+

soli 4 my poor english

This post has been edited by nckent: Nov 12 2006, 09:49 PM

if u wanna oc, better change ur psu 1st..

since ur mobo use nvidia chipset which can fix pci/agp clock
u nid not 2 worry bout d improper fsb will made ur comp unstable

n ur slk800 can b said as a good heatsink dy
so wat u hv 2 do is jz test ur best fsb 4 optimum oc

This post has been edited by nckent: Nov 12 2006, 09:58 PM

by default, ur 2500+ should b 11 (multiplier) * 166 (fsb) = 1826Mhz
mostly multiplier had been locked so u can oni increase fsb 4 oc

suggest u adjust fsb within 166~200Mhz n test out d best fsb 4 ur comp
n do fix ur pci/agp clock at 33/66Mhz (i dunno whr 2 set coz i nvr use nvidia board )
don increase d voltage if ur comp can boot up n stable after oc

btw i think tis forum got sum guide on basic oc
mayb u can search around or ask soulfly (mod) 4 tat article

This post has been edited by nckent: Nov 14 2006, 10:48 AM

Barton core 11*200=2200 should b AMD AthlonXP 3200+
mayb u hv2 update ur bios..

try sum software 2 burn ur proc 4 testing its stability
(u can use "SP2004" or "Prime95" as well)
if thr is no error after 5-6 hours, tat's mean not ur proc prob...
then i think may b ur GC driver prob..

ya! mr google is my best buddy
i suggest u use SP2004 since it's GUI interface 2 Prime95's Torture Test

get from here:
http://sp2004.fre3.com/download.htm

u'r wellcome
do let us noe d result after test