So I wanna add share my experience during my trip to Taiwan to get my phone wrapped. Fyi phone wrapping service is a very common culture in Taiwan, almost 90% of mobile phone users in Taiwan wrap their phones.

So i went to Mos Coat Taipei which I usually go to when i'm on business trip, and their services is simply 100% 5 stars.

So without wasting time here are the pictures of the wrapping process.

start by wrapping the side
[attachmentid=4290440]
using hair dryer to heat up for the curve sides
[attachmentid=4290441]

start by cutting the antenna areas (side bezels are wrap with 2 layers)
[attachmentid=4290442]

cut out the speaker port, lightning port, microphone port and headphone jack
[attachmentid=4290446]

preparing the back wrap, note that their is a pre cut out for the camera area, and yes of course, is cut with laser

[attachmentid=4290452]

putting on the wrap with 1 movement only, very clean install; as expected from the pros.
[attachmentid=4290453]

heating up the corners excess and smooth them down on the curves.
[attachmentid=4290457]

trimming out the mute switch, power and volume button
[attachmentid=4290463]

moment of truth, installing the 3d corning. (mos coat shop is own by imos boss)
[attachmentid=4290464]

black corning on white iphone...
[attachmentid=4290466]

using alcohol to clean any grim or dust on the screen
[attachmentid=4290468]

clearing out any remaining micro dust particles with tape.
[attachmentid=4290474]

putting on the phone

[attachmentid=4290477]

turning on screen to see alignment
[attachmentid=4290479]

using a pen (without the pen tip out of course) to smooth out any remaining stubborn bubbles .
p.s. the corning that mos coat is selling is 2nd batch, which still has the bubble issue so have to resolve with smoothing out with pen. the latest stock that Connect2USales receive will be no problem as imos said to have solved it. but in case everyone is wondering with mine, so far so good no bubbles at all.

[attachmentid=4290481]
3 home buttons to choose from, all grade 316 stainless steel coated with 24k gold/ platinum/ and black pearl nickel
[attachmentid=4290487]

final wiping
[attachmentid=4290490]

after that i felt white abit boring with white so i went back to mos coat to have it changed to black color. and here is the end result now.

[attachmentid=4290491]

More info for Mos Coat professional wrapping service.

https://www.facebook.com/MosCoat

location :

my current set up

1. imos 3d corning black
2. black home button with gold ring (yes it works with touch ID)
3. innowatt hybrid style case (bought in machines gardens)

there are in business since 2004 iinm, more than 10 years of service.  i also hope that malaysia offer this service

Why o? Now more n more people using glass sp
That's the 1st batch... 2nd batch no such issue cos they increase the adhesive, but cause bubbling issues.. 3rd batch no problem at all.
IPhone 6 - rm199 / 6 plus - rm219

not sure, if you have any friends (who u can trust) travels to taiwan maybe ask their help to bring your phone there to wrap ?

not sure.. previously a friend of mine started a coating service in singapore... but like no more news... use some sort of spray to coat the phone and it will be waterproof and scratch proof...

using this case now.

neo hybrid metal

yes, the TPU case turns to yellow very fast, happens to my z2, 3 months turned yellow

for my iphone 6, i can see that colour definitely changing already

both also ultra hybrid transparent, the side rubber part is turning yellow but the hard back cover stays perfectly transparent